Satellite A110 (PSAB0) running hot after BIOS update

Similar Questions

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite L650 - Touchpad turn off after BIOS update

  Hello
  I recently got a new laptop, a L650-1CN,.
  I run different types of software from Toshiba, and one of them is Tempro,
  He shows me messages when a new update is available.

  Today I saw the message that a new BIOS update v.1.80 was available.
  I downloaded and installed. After installing my laptop closed. Then I started again.
  But after a few minutes, I noticed that my touchpad disable itself more.
  I usually use a logitech wireless mouse.

  Now, I wonder if I should do a system restore and not install this update of the BIOS or find another solution for this problem. Because it's really boring.

  Thanks in advance.

  Hey Buddy,

  Usually the touchpad disable automatically if an external mouse is connected, but only if you enable this option in the touchpad settings.

  I also use an external Logitech mouse and have enabled this option. You can find it in Control Panel > mouse. Go to the device settings tab and mark the internal pointing device option disable when the external USB pointing device is attached.

  I hope it works :)

• Equium A210-1AS - it gets hot after BIOS update

  Hey, I was wondering if anyone can help here...

  Currently have a Toshiba Equium A210-1AS with BIOS version 1.80 worm 1.00PARTTBL 08/04/2008.

  Given that BIOS has been updated for a long time in this version 1.80 the computer became hot very quickly and therefore the laptop performance declined.
  I looked on the Toshiba support site and upgrade only version 2.00 was not compatible with this laptop.

  Any help would be greatly appreciated. Short model number is PSAFJE
  Thank you

  Hello

  I checked the site Web of Toshiba and I didn't see any BIOS update for satellite A210 PSAFJE. This means that an update of the BIOS was never marketed for this laptop, normally.

  To me it sounds like that you have updated the BIOS with one version for another Equium A210. So, you should go to an authorized service provider. Technicians can install the right version of BIOS for you (downgrade).

  Good bye

• Satellite L305D asking a password after BIOS UPDATE

  I have a Satellite L305 series and recently updated the bios, once the system has restarted his request now a password.

  I never put a password on that system and don't know how to get down the password.
  Is this a known issue with the 1.40 bios update or what, how also can this issue be resolved free of charge if the system is under warranty?

  Only to Toshiba Post screen and then give the password.
  Is it possible to get the system to boot from the bootable cd before asking for password update bios to the latest version if it is available?

  System is almost new...
  Help, please

  It's really strange are you sure you used a good BIOS?

  However, there is only one real solution; you need the help of a technician of the ASP.

  The point is that it of not possible to remove the BIOS password without any help of ASP. Only ASP technician can remove it and how to do this.

  That's why ask ASP in your country a help!

  Good luck buddy

• Equium A200-1VO does not run stable after BIOS update

  Hello

  I have a PSAF5E-002005KS A200-1V0. I updated my bios to help what he '20080212105826.zip' file and it doesn't seem to be as stable as it was before.
  It get error messages different copy, msdos errors etc.

  Can I return the bios to the original one and where can I find this please?

  Brian

  Unfortunately, the first version of the BIOS can be installed by a technician of the ASP.

  But I wonder about the error messages that appear after the update of the BIOS.
  Have you tried to reinstall the OS from the recovery CD? You must test the laptop with the factory settings!

  By the way; access the BIOS and set the defaults. And don t forget to save changes ;)

• Satellite C660D - screen is black after BIOS update

  Hello!

  I need your help to solve the problem that I have...

  I have Satellite C660D - 1 3, I was upgrading bios up-to-date and poster ON but black screen, ventolidor work and open and close leitor dvd...

  no idea what problem? And how to solve?

  I'm waiting for.

  Thank you.

  André Pedro.

  I'm afraid that the BIOS is doomed and the BIOS update was not successfully. It is not easy to fix.
  On this forum I found similar thread, then you can read and perhaps solve the problem.
  Check it out.

  https://Forum.Toshiba.EU/showthread.php?54395&TSTART=0

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• Pavilion 500-046: fan runs loudly after BIOS update

  So I downloaded the BIOS and sends an update notifications HP wireless. Consumer Desktoop PC BIOS update HP (family ROM SSID ZAEO). After the restart, the fan on my PC very strong rotates every 30 seconds or so for about 15 seconds then turns off; sometimes even more frequently. It's never happened before. Anyway I can fix this or go back to the old BIOS or something?

  Then I opened my PC and went home with a feather duster and a vacuum. This ended the problem.

  Thanks for your help Dave.

• Satellite A200-1fj - black screen after BIOS update

  Hello guys,.

  I'm planing to update my bios for this version

  http://support.toshiba-tro.de/tools/EULA/calleula.asp?ID=63108

  and my pc got little froze and lag then I close the program that has Flash my bios and restart my turn then black screen... I search and found this thread talking about the BIOS recovery and there seemed not workin for me (I use my 8 GB flash memory) and just do Fn + B when I press the power button to start and then the power led becomes orange... and nothing happens...

  Everyone please provide me the bios file just for this model and give me a clear instruction to Flash my bios with my flash (8 GB) memory

  W8 your replay guys, thx

  + The message was edited: link removed - unauthorized 3rd party Forum +.

  If the BIOS update was not properly flashed, the ROM should generally be flashed with a disc of crisis of the BIOS.
  This can be done by authorized Toshiba available in your country.
  Then get in touch with the ASP to solve this problem.

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Satellite C850 - slow fan speed after BIOS update

  Hello

  So I have my bios Satellite C850-PSKCEV update version 6.80 (I bought my laptop in 2012), about 6 months ago and since then the fan turns at low speed and will never run full speed as before, and therefore, the laptop overheats prematurely and very quickly and even when the laptop is not in use but market it overheat also game isn't possible as any game that I run (even with the smaller settings) Gets a drop in fps every 5 seconds and lasts for 5-10 seconds that makes even the lightest unplayable games, also I have fear of the continuous overheating of components of the laptop.

  I clean the fan and vents the dust and there is not even a particle inside of them and still the fan will not run fast and I can't feel but very slight air flow from the orifice as apposed to tough before this problem.

  Laptop model Toshiba Satellite Ref. C850-A811 PSKCEV-00S00FAR
  Intel Core i5 2450 m - AMD Radeon Hd m 7670
  8.1 Windows 64-bit

  After updating the BIOS, you should enter the BIOS and should load the default settings.

  In addition, you can try to decrease the max CPU to 98-99% performance.

  This can be done in the settings mentioned by Liam and to be honest, this change would not really affect the performance of the laptops.

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• Satellite A105 shift stop working after BIOS update

  I have a stack of boards of laptop of the A105 (Intel chipset) series that I received with the wrong BIOS. Both worked, and I updated the BIOS on them to solve CPU compatibility issues. After that, the shift keys stopped working and pressing Shift-A causes the power led to decrease in intensity. Return to ANY BIOS version, either by the Windows, CD or floppy disk of crisis recovery program (magic key is 'F', not 'B', 'Esc' or 'U'), does not solve the problem of the keyboard.

  To make things more confusing, I've noticed that single BIOS one that actually seems to correct the problem is version 1.50, which I have not seen available for any Tecra A7 or Satellite A100/A105, with the exception of a few 100, but the BIOS file is too small and cannot be loaded.

  Anyone has an idea why these cards Intel processor do that? Or did someone knows where I can get a usable version of BIOS 1.50?

  In the interest of this post, please consider my high level of competence. (In other words, I would be grateful for the people trying to help 'Replace the keyboard', but I have about a dozen keyboards, that everything I tried, and all work on other laptops. In addition, if you have just a theoretical solution, I'm certainly open to hearing. In addition, if a Toshiba tech would answer, I really appreciate it!)

  An update, it seems that the laptop from a different manufacture series show almost the same problem. There are certainly similarities of BIOS, since these Toshiba use the magic key to Fujitsu to trigger the block to start recovery from the crisis. I guess it's very likely that this problem is specifically a problem of Phoenix BIOS.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...