Satellite C660D - screen is black after BIOS update

Similar Questions

• Satellite M100-165: screen dithering also after BIOS update

  I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
  http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

  I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
  Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

  P.S. The LCD Panel seems to be a SEC5643

  Hi guys

  If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.

• Satellite L670 - screen remains black after sleep mode

  I recently bought a L670. When I close the laptop, it goes into sleep mode. No problem with that. But when I opened the laptop again the screen remains black.
  I see on the drive activity light that the laptop come out of sleep mode correctly, but the screen remains black.

  I don't have this problem when the sleep mode is only a few minutes. Then the screen comes up correctly.
  But for example after an hour of sleep mode... no screen.

  I'm doing something wrong?

  Thanks in advance for your feedback.

  Hello

  I recommend the update to the BIOS and the display driver.
  It helped to solve a similar problem on my old laptop.
  Maybe it helps in your case.

  Good luck

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.

• Satellite L305D asking a password after BIOS UPDATE

  I have a Satellite L305 series and recently updated the bios, once the system has restarted his request now a password.

  I never put a password on that system and don't know how to get down the password.
  Is this a known issue with the 1.40 bios update or what, how also can this issue be resolved free of charge if the system is under warranty?

  Only to Toshiba Post screen and then give the password.
  Is it possible to get the system to boot from the bootable cd before asking for password update bios to the latest version if it is available?

  System is almost new...
  Help, please

  It's really strange are you sure you used a good BIOS?

  However, there is only one real solution; you need the help of a technician of the ASP.

  The point is that it of not possible to remove the BIOS password without any help of ASP. Only ASP technician can remove it and how to do this.

  That's why ask ASP in your country a help!

  Good luck buddy

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• IdeaPad S500 Touch - screen goes black after driver update

  I have a Lenovo IdeaPad S500 Touch. It is running the latest update of Windows 8.1. He proposed an update of the video driver from Lenovo. After downloading and installing the update, the screen went black. When the computer reboots, the Lenovo logo appears on the screen, and it goes black again. No matter what I try, that's all.

  Does anyone have a suggestion?

  Thank you

  James

  Hi Scoutmaster316,

  Welcome to the Community Forums of Lenovo!

  You will need to restart the system in safe mode.

  There is the only option to boot your situation is down to the system startup

  When you turn on the system, Lenovo Logo appears then black screen maybe wait a minute hold it the power button down until the accident it you must reapeat this 4-5 times until it starts to a page like this

  

  Once you have got to follow these choices that

  Troubleshooting / Advanced Option / start parameters

  Then you should rerach options with, select Safe mode which.

  If the driver is the problem, you should be able to start here,

  Open the Device Manager and rollback video driver

  Concerning

  Solid Cruver

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Satellite L650 - Touchpad turn off after BIOS update

  Hello
  I recently got a new laptop, a L650-1CN,.
  I run different types of software from Toshiba, and one of them is Tempro,
  He shows me messages when a new update is available.

  Today I saw the message that a new BIOS update v.1.80 was available.
  I downloaded and installed. After installing my laptop closed. Then I started again.
  But after a few minutes, I noticed that my touchpad disable itself more.
  I usually use a logitech wireless mouse.

  Now, I wonder if I should do a system restore and not install this update of the BIOS or find another solution for this problem. Because it's really boring.

  Thanks in advance.

  Hey Buddy,

  Usually the touchpad disable automatically if an external mouse is connected, but only if you enable this option in the touchpad settings.

  I also use an external Logitech mouse and have enabled this option. You can find it in Control Panel > mouse. Go to the device settings tab and mark the internal pointing device option disable when the external USB pointing device is attached.

  I hope it works :)

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• HP Envy 17 built-in screen went black after system updates.

  Hello!

  Earlier today, after updates monthly to Win 7 Home Prem (64 bit, Engl.)  I had the problem with the display of colors with my HP Envy 17. It turns out that caused Windows Silverlight (?) to indicate only a few 256 colors (?). So I plugged another screen (Samsung 22 inch SyncMaster) as external monitor to the computer.  This worked OK. So, I removed the updates of windows outside one by one, starting system after each file. After the removal of Silverlight, the built-in screen returned to original resolution and colors (1910 * 1080, 60 Hz, 32-bit). Then I reinstalled all the other updates and started the system. So far, I was happy. The original problem has been resolved.

  Then, I checked the status of HP Support Assistant. He suggested the update of the program itself and some 5 other updates. I've updated the HP Support Assistant first.  That went well, I guess. After the system start, I checked the other updates the new version of HP Support Assistant suggested. This includes for example. update the BIOS and 4 other updates. After download and installation of these, system startup has produced, triggered by the update. OK to start the system, and Windows started a little. But then the screen integrated (HP laptop) do not continue to see the picture more, external only display gave the image. I used the double at this stage display mode. -Only when you start Windows in safe mode, the screen seems to work, but with a limited resolution and properties.

  I tried to change display modes (dual Extended display, disconnect, projector only), but the screen does not appear. Or, if we turn off the lights (black room), one can imagine to be able to see a light screen Veery also (built-in display) - so some photos also forms in this case (the built-in screen of HP Envy 17). Remove the external display and the system startup without it does not help.

  Please help me and teach how to bring back the computer screen in life!

  BR, Alfa68

  Hello.

  Just letting you know that the screen of my HP Envy 17 2050ea now works fine! What helped was a call to the local HP support; Today, I managed to pass through. He suggested to delete the display driver that I did in Safe Mode, as the built-in screen still worked. I've done the following:

  * I started the system using Windows Mode safe mode with networking (press F8 to get there after startup)

  * The I went to the Device Manager (you can use the start search to find)

  * There, I chose the graphics cards. With the right button of your mouse, I have selected to uninstall the display Radeon (TM) driver. In my case it was Radeon (TM) HD 6850 M.

  * After the driver has been uninstalled, I started the system. System booted normally (complete Windows).

  * Now the display settings were a little strange, but the screen has worked

  * After a minute or two, automatic update of the display driver has occurred. System infomed me to this topic. Then I rebooted, to allow the driver to use.

  * After reboot my screen was back to normal, as it was before the problem.

  Summary: The problem has been resolved through resettlement of the display driver. Fortunately, heavy recovery or reinstallation of the entire system was not necessary.

  WKR, Alfa68

• Re: Computer laptop Satellite U does not work after BIOS update

  I was updating my BIOS.

  My computer restarted abruptly, saying: there was a problem and that a check should be performed.
  After reaching 100%, he's stuck. I waited for a while, but eventually it turned off.

  When I rebooted, it stopped working correctly.
  The screen, keyboard and USB ports do not work.

  Can anyone help with this?

  Hello

  Looks like something was wrong during the update of the BIOS.
  In this case the module ROM was flashed properly and therefore your laptop cannot start properly.

  I think the BISO ROM must be flashed again, but this can be done by a Toshiba ASP because guys have had a trad-BIOS version that is necessary to Flash the ROM module

  Good luck

• Satellite A105 shift stop working after BIOS update

  I have a stack of boards of laptop of the A105 (Intel chipset) series that I received with the wrong BIOS. Both worked, and I updated the BIOS on them to solve CPU compatibility issues. After that, the shift keys stopped working and pressing Shift-A causes the power led to decrease in intensity. Return to ANY BIOS version, either by the Windows, CD or floppy disk of crisis recovery program (magic key is 'F', not 'B', 'Esc' or 'U'), does not solve the problem of the keyboard.

  To make things more confusing, I've noticed that single BIOS one that actually seems to correct the problem is version 1.50, which I have not seen available for any Tecra A7 or Satellite A100/A105, with the exception of a few 100, but the BIOS file is too small and cannot be loaded.

  Anyone has an idea why these cards Intel processor do that? Or did someone knows where I can get a usable version of BIOS 1.50?

  In the interest of this post, please consider my high level of competence. (In other words, I would be grateful for the people trying to help 'Replace the keyboard', but I have about a dozen keyboards, that everything I tried, and all work on other laptops. In addition, if you have just a theoretical solution, I'm certainly open to hearing. In addition, if a Toshiba tech would answer, I really appreciate it!)

  An update, it seems that the laptop from a different manufacture series show almost the same problem. There are certainly similarities of BIOS, since these Toshiba use the magic key to Fujitsu to trigger the block to start recovery from the crisis. I guess it's very likely that this problem is specifically a problem of Phoenix BIOS.

• Satellite A50 does not work after BIOS update

  Hi all
  I tried to Flash my BIOS through windows such as recommended on my website of the manufacturer of the laptop (Toshiba). I guess that the process was not as after only 2 hours still "don't interrupt" message displayed. I had to force power off of my PC. Now it is not initialized.
  The Laptio is Toshiba SA50-114, series of satellites. Model n - PSA50E

  I tried the suggestions in the following link
  http://askiris.Toshiba.com/ToshibaSu...200%2035586212
  However, it did not work.

  However, I don't have the disk recovery and file/ROM BIOS tool. Have tried to search on the internet, but without any result.

  Can someone help me please
  1. How can I update the BIOS to get my PC to running back.

  2. to turn towards links where I can find the files in the link above.

  Thanks in advance.
  Best regards
  Parag

  > 1. How can I update the BIOS to get my PC to running back.
  Not possible if your ROM BIOS module was bad flashed.
  If you are a lucky man only the ROM module must be flashed again using a special procedure. But this can be done by a service provider authorized in your country.

  > 2. Point me to the links where I can find the files in the link above.
  There is no link! You need to ask to help ASP.

  Good bye

• Satellite C850 - slow fan speed after BIOS update

  Hello

  So I have my bios Satellite C850-PSKCEV update version 6.80 (I bought my laptop in 2012), about 6 months ago and since then the fan turns at low speed and will never run full speed as before, and therefore, the laptop overheats prematurely and very quickly and even when the laptop is not in use but market it overheat also game isn't possible as any game that I run (even with the smaller settings) Gets a drop in fps every 5 seconds and lasts for 5-10 seconds that makes even the lightest unplayable games, also I have fear of the continuous overheating of components of the laptop.

  I clean the fan and vents the dust and there is not even a particle inside of them and still the fan will not run fast and I can't feel but very slight air flow from the orifice as apposed to tough before this problem.

  Laptop model Toshiba Satellite Ref. C850-A811 PSKCEV-00S00FAR
  Intel Core i5 2450 m - AMD Radeon Hd m 7670
  8.1 Windows 64-bit

  After updating the BIOS, you should enter the BIOS and should load the default settings.

  In addition, you can try to decrease the max CPU to 98-99% performance.

  This can be done in the settings mentioned by Liam and to be honest, this change would not really affect the performance of the laptops.