Satellite A110 - start not at all!

Similar Questions

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite P300 - 13 M start not at all

  Hello everyone,

  My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

  When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

  This means the end of my laptop?

  Please help me as fast as you guys can't because it's my only laptop work.

  Thank you very much

  PS If you want specs, then I can't give you their. I don't know the specs by heart.

  > This means the end of my laptop?

  No doubt :(

  But try this: remove the battery and ac adapter
  Leave the laptop disconnected for a longer period of time (a few hours)
  Then press the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and try to turn on the unit.

• Satellite S955 starts not to POST and black screen

  Hello

  I have a problem with my s955 (14 months). He is not able to start more. When turned on, I hear only the cooling fan spins up and down and nothing more. The last time, it took almost half an hour to work around this failure. When turned on it shows no problem at all. When you stop it is better to pray. It now seems to be missing. After an hour, I see no sign of life except cooling fan activity.

  I went through all the stuff mentioned in another forum of Toshiba as turned off, remove the battery, keep and maintain the power button for at least 60 seconds. I even replaced the RTC internal Li - ion, but without success. Because it is not covered by warranty more I opened it. No sign of didn't burn except a suspicious oxidation of some contacts.

  I contacted Toshiba Italy (even if it is a U.S. model.) and I expect a possible answer next week. I ran out of the possible solution except replacement of mobo. Is there anyone around who has the same problem? Could you please give me a help?
  Thank you and best regards

  Pyder

  Hi, not Toshiba Italy news but I found a Toshiba authorized service workshop that may solve this problem. It seems that, beyond other speculations, the problem may be issued by the fuse of power mainboard (read this answer interesting of maxtek73 [http://forums.toshiba.com/t5/Batteries-and-Power/My-Toshiba-Satellite-Laptop-Will-Not-Turn-On/m-p/584008#M11147] at the end of the post). It seems reasonable. In fact, keyboard, dvd player, charge battery, hd, and cooling fan are powered by the motherboard. It seems that there is not enough current to pass initial tests before POST. This could explain why the cooling fan trying to run at maximum speed, but he can't. I had to remind that to turn on, no equipment TI push fans at max speed and then slow down to normal speed before entering the POST process. I'll have a conversation with the technician of the workshop and I'll keep you in the loop.
  Best regards
  Pyder

• Satellite A110-195_model not presented on the Toshiba driver downloads

  Hello

  After searching Toshiba "Drivers & downloads", I can't follow the Satellite * A110-195 * model...
  I have enter the serial number and is here with family models (2)...

  A110 - 195 (PSABO)
  A110 - 195 (PSAB6)

  This model is discontinued and removed from the knowledge base of laptop?

  see you soon,

  ARIS

  I do not understand your problem, your model has been found, and as in your ad said there are two different models of your machine. You must check only the model number which is written on the sticker serialnumber silver on the bottom of the machine...

  Welcome them

• Equium P300-16 t start not at all

  Hello

  The problem I have is I leave the girl uses the computer laptop that she began the start-up but then decided that she would not use the laptop while she just hit the power button instead of close properly, now I can't access the laptop all the following events occur.

  At the start, I can see the screen of the Tosh and can access the BIOS and boot options screens thin I looked at these and everything looks ok in the BIOS, I tried to press the F8 key but it will not display the recovery options. I also tried to boot from a recovery CD I have but it would seem that he doesn't want to boot from the CD player, when the machine starts the flashes for a few seconds and then stops, HARD drive but he point blank refuses to boot from a CD and I tested the CD in another machine (no tosh) and it starts very well this one has left me speechless I've never had a machine that will not boot the CD/DVD drive.

  Cliff Cook

  Can you please test with a few other startup disk (Linux or Microsoft installation disc)?

• 13D-3000 spectrum: spectrum 13D-3000 HP start not at all

  Hello.  I have a laptop of 13 t-3000 HP spectrum.  It is about 2.5 years, in very good condition.  I plugged it in charge to the top of a few nights there, but in the morning it would not start at all.  The only thing that happens is that the power light and the Wifi (F12 key) periodically flash light, every 5 seconds.  The screen does not turn on and is completely black, I don't hear any fan and no other activity of any kind.

  I would like any info or suggestions on what may be wrong.

  I tried a number of things from the web searches.  It is:

  -J' I hold power for 30 seconds to do a "hard reset."  This will stop the flashing.  But if I hit the power again, then the power button / stop and button wifi starts flashing again, but no other activity.

  -J' checked that the battery is fully charged.  The light close to the load port turns orange when I plug in the charger, then after a while, it becomes white to indicate that it is fully charged.  I even put a voltmeter on the power supply to verify that he produced 19.5 Volts.

  -J' removed the bottom cover to check for any bad connection or dust.  There is no dust, and the laptop is extremely clean.

  It was taken by storm the night where I plugged it in to charge, and it was directly connected to the wall.

  Suggestions of how to fix it myself, or what it should cost to someone else to fix this would be appreciated.

  Thank you.

  -Danny

  I just followed on this point, because I've seen similar questions, but never a definitive answer.

  After you call HP Tech support, they told me that the power light flashes & key F12 is a symptom of the motherboard

  failure.  The solution is to change the motherboard.

  My computer came with a warranty of 2 years, but the computer was 2.5 years old, so it was out of warranty.

  After some negotiations on the price, HP has decided to fix the problem for $250, including shipping both ways.

  It's less than a week back including delivery on time and I have the laptop back and it seems to work

  Well now.  I have a 90 day warranty on the repair.  In the future, I'll be careful to always use a surge protector

  When it loads up.

  -Danny

• Satellite A200 starts not - LED flashing error

  I have problem with my Satellite A200.
  The battery button blinks 2 times blue and orange 2 times and it does not start.

  Can someone help me?

  Hello

  Please check this interesting document: what can I do if my computer will not Power On?
  If the problem persists please let us know.

• Satellite M30 starts not-lack file

  Help!
  Help!
  My Satellite SM30-404 does not begin with the words (in German):
  Windows could not be started because the following file is missing or corrupt:
  \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  I can see this file with a backup extern CD, but it is short-unnormally (approx. 300 KB) and I can't replace it.
  I can't recover the system, because I HAVE TO SAVE a large number of files for the University examinations.
  What can I do?

  Hello

  Here are two interesting documents on this issue:

  http://support.Microsoft.com/kb/307545/en-us
  http://support.Microsoft.com/kb/269075/en-us

  If you can get the WIN XP CD using repair option facilities.

• Dell XPS 8500 - start not at all - motherboard problems?

  I have a Dell XPS 8500 I bought in January of 2013 and of course, is now out of warranty. I have not had too many problems with the pc, but last week, I was copying some video files on the SD card in the card on the hard disk drive. My wife told me that supper was ready, so I left the system to finish copying the video files on the HARD drive and ate with my family.

  After we finished eating, I went back in the Office to discover that my computer was turned off. I tried to turn it back on and got no answer to it at all. I held the power button down and still nothing. After unplugging all devices still do not get response. I unplugged the power cord that goes into the food and green on the back of that flickered as I unplugged and plugged in so I thought I had my problem properly diagnosed as a failure of the power supply. I ordered a replacement PSU and installed today but I'm still no response from the computer when you try to start it. I have all the cords of the PSU properly plugged into the HDD and the dvd player and the connector 24 pin to the motherboard as well as the connection of 4 pins so.

  The ONLY answer I get when trying to turn on the computer is that the fan in the power supply and fan to the rear of the case against surges momentarily and return to the stop. They are not even a half of a revolution, and that's all I get.

  Any suggestions would be wonderful! I wonder if it's a motherboard problem and if so, where to find a replacement motherboard. And if not the mobo, what else it could be.

  Thanks in advance for any help you can give me!

  Matt in South Dakota

  pinkorat

  Has worked for me - everything seems to work very well.  Thank you.

  Is there anything else I need to do after clearing the BIOS?

  No, you should be all good...

• Firefox browser start not at all, despite bugs - help!

  I've upgraded to the latest browser. It worked well. then on 4.10.14, I clicked on the icon on the desktop or taskbar and it will not open and no error displayed. I tried all of your corrections - neither works. a box from "create a profile" does not when I try this fix.

  I spent over 3 hours on this problem without success and I was very angry. I would like a set of final, descriptive to this problem as soon as possible solutions.

  Kind regards

  I uninstalled Tor, I uninstalled Firefox, I ran registry & apps CCcleaner cleaner, I restarted my PC, reinstalled Firefox 32.0 - Firefox to the top and work!

  Thank you very much for your patient support.

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• Seven Windwos start not at all, even in safe mode.

  I had a problem with my port ethret so I thought I would restore back to before the problem occurred to fix. System Restore is stuck somewhere in the middle and continue woudn't. I gave up after an hour or two and restarted, it. Now he does not even start in safe mode. I get the following error message: Windows could not complete the installation. To install windows on this computer, run the Setup again. Whenever I restart it the same thing happens. Its stuck in a loop. I would like to save my files, but I think that the only option I have is to get another drive for her. If I could get the files off my system, I would not hesitate to wipe the drive. Do I have other options?

  Thanks anyway. I'll have to wait for my drive to arrive but I will try the reset of the bios and see if that helps. At this stage, it can't hurt.

• Satellite C50D starts not screen

  I have a C50D sat that starts is no longer. The fan is running but nothing on the screen.

  It started with ports USB becomes defective, then AMD driver stopped working intermittently to display

  Then the wireless adapter stopped

  Any ideas?

  Any ideas?

  Looks like a serious hardware problem... I got the message, the laptop doesn't react any more except the fan...
  Perhaps that the GPU is defective... cannot say with certainty what is wrong because any part may be affected...

  Have you tried to remove the battery and unplug the AC adapter and then to press and hold the button long market of 30 to 50sec?
  If it isn't do... and check if the laptop could be powered...

• InDesign CC 2015 - starts not at all after the last update! Help!

  Here go us.

  Since the last update for CC, InDesign has completely stopped working for me.

  I have uninstall/reinstall several times.

  I tried to open it with another Windows user.

  I used the creative cloud cleaning tool.

  I deleted all the files of preference (including cache)

  I just reinstalled it again and again, nothing.

  All I get is a Windows notification that there is a problem with the program and Windows to send a crash report.

  Help, please!

  CC programs works except InDesign.

  Yes, you can install previous versions by opening your cc app > apps > find applications > view previous applications > install id > cc 2014