13D-3000 spectrum: spectrum 13D-3000 HP start not at all

Hello.  I have a laptop of 13 t-3000 HP spectrum.  It is about 2.5 years, in very good condition.  I plugged it in charge to the top of a few nights there, but in the morning it would not start at all.  The only thing that happens is that the power light and the Wifi (F12 key) periodically flash light, every 5 seconds.  The screen does not turn on and is completely black, I don't hear any fan and no other activity of any kind.

I would like any info or suggestions on what may be wrong.

I tried a number of things from the web searches.  It is:

-J' I hold power for 30 seconds to do a "hard reset."  This will stop the flashing.  But if I hit the power again, then the power button / stop and button wifi starts flashing again, but no other activity.

-J' checked that the battery is fully charged.  The light close to the load port turns orange when I plug in the charger, then after a while, it becomes white to indicate that it is fully charged.  I even put a voltmeter on the power supply to verify that he produced 19.5 Volts.

-J' removed the bottom cover to check for any bad connection or dust.  There is no dust, and the laptop is extremely clean.

It was taken by storm the night where I plugged it in to charge, and it was directly connected to the wall.

Suggestions of how to fix it myself, or what it should cost to someone else to fix this would be appreciated.

Thank you.

-Danny

I just followed on this point, because I've seen similar questions, but never a definitive answer.

After you call HP Tech support, they told me that the power light flashes & key F12 is a symptom of the motherboard

failure.  The solution is to change the motherboard.

My computer came with a warranty of 2 years, but the computer was 2.5 years old, so it was out of warranty.

After some negotiations on the price, HP has decided to fix the problem for $250, including shipping both ways.

It's less than a week back including delivery on time and I have the laptop back and it seems to work

Well now.  I have a 90 day warranty on the repair.  In the future, I'll be careful to always use a surge protector

When it loads up.

-Danny

Tags: Notebooks

Similar Questions

  • Satellite P300 - 13 M start not at all

    Hello everyone,

    My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

    When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

    This means the end of my laptop?

    Please help me as fast as you guys can't because it's my only laptop work.

    Thank you very much

    PS If you want specs, then I can't give you their. I don't know the specs by heart.

    > This means the end of my laptop?

    No doubt :(

    But try this: remove the battery and ac adapter
    Leave the laptop disconnected for a longer period of time (a few hours)
    Then press the power button / stop along 30 sec.
    Then connect the battery and the AC adapter and try to turn on the unit.

  • Satellite A110 - start not at all!

    My laptop won't boot. Battery does not charge, but the laptop won't start even on plug (with or without battery in place).
    Any ideas?
    Thank you

    Sounds like a motherboard problem

    Have you tried to remove the battery and the AC adapter? Remove the two and wait an hour and then reconnect the battery and the AC adapter.

    If it doesn't work, you need to contact a service provider for help. The technicians can help you control the laptop.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • Equium P300-16 t start not at all

    Hello

    The problem I have is I leave the girl uses the computer laptop that she began the start-up but then decided that she would not use the laptop while she just hit the power button instead of close properly, now I can't access the laptop all the following events occur.

    At the start, I can see the screen of the Tosh and can access the BIOS and boot options screens thin I looked at these and everything looks ok in the BIOS, I tried to press the F8 key but it will not display the recovery options. I also tried to boot from a recovery CD I have but it would seem that he doesn't want to boot from the CD player, when the machine starts the flashes for a few seconds and then stops, HARD drive but he point blank refuses to boot from a CD and I tested the CD in another machine (no tosh) and it starts very well this one has left me speechless I've never had a machine that will not boot the CD/DVD drive.

    Cliff Cook

    Can you please test with a few other startup disk (Linux or Microsoft installation disc)?

  • Dell XPS 8500 - start not at all - motherboard problems?

    I have a Dell XPS 8500 I bought in January of 2013 and of course, is now out of warranty. I have not had too many problems with the pc, but last week, I was copying some video files on the SD card in the card on the hard disk drive. My wife told me that supper was ready, so I left the system to finish copying the video files on the HARD drive and ate with my family.

    After we finished eating, I went back in the Office to discover that my computer was turned off. I tried to turn it back on and got no answer to it at all. I held the power button down and still nothing. After unplugging all devices still do not get response. I unplugged the power cord that goes into the food and green on the back of that flickered as I unplugged and plugged in so I thought I had my problem properly diagnosed as a failure of the power supply. I ordered a replacement PSU and installed today but I'm still no response from the computer when you try to start it. I have all the cords of the PSU properly plugged into the HDD and the dvd player and the connector 24 pin to the motherboard as well as the connection of 4 pins so.

    The ONLY answer I get when trying to turn on the computer is that the fan in the power supply and fan to the rear of the case against surges momentarily and return to the stop. They are not even a half of a revolution, and that's all I get.

    Any suggestions would be wonderful! I wonder if it's a motherboard problem and if so, where to find a replacement motherboard. And if not the mobo, what else it could be.

    Thanks in advance for any help you can give me!

    Matt in South Dakota

    pinkorat

    Has worked for me - everything seems to work very well.  Thank you.

    Is there anything else I need to do after clearing the BIOS?

    No, you should be all good...

  • Seven Windwos start not at all, even in safe mode.

    I had a problem with my port ethret so I thought I would restore back to before the problem occurred to fix. System Restore is stuck somewhere in the middle and continue woudn't. I gave up after an hour or two and restarted, it. Now he does not even start in safe mode. I get the following error message: Windows could not complete the installation. To install windows on this computer, run the Setup again. Whenever I restart it the same thing happens. Its stuck in a loop. I would like to save my files, but I think that the only option I have is to get another drive for her. If I could get the files off my system, I would not hesitate to wipe the drive. Do I have other options?

    Thanks anyway. I'll have to wait for my drive to arrive but I will try the reset of the bios and see if that helps. At this stage, it can't hurt.

  • Firefox browser start not at all, despite bugs - help!

    I've upgraded to the latest browser. It worked well. then on 4.10.14, I clicked on the icon on the desktop or taskbar and it will not open and no error displayed. I tried all of your corrections - neither works. a box from "create a profile" does not when I try this fix.

    I spent over 3 hours on this problem without success and I was very angry. I would like a set of final, descriptive to this problem as soon as possible solutions.

    Kind regards

    I uninstalled Tor, I uninstalled Firefox, I ran registry & apps CCcleaner cleaner, I restarted my PC, reinstalled Firefox 32.0 - Firefox to the top and work!

    Thank you very much for your patient support.

  • Skype starts not at all, showing offline icon in the taskbar

    Hello everyone, I have a very annoying with Skype problem since I installed the IP camera on my Samsung phone, I tried to solve this problem for weeks, I finally got to Skype successfully opened by decommissioning in Skype 6.14, but when I go into my video settings, it shows the (completely uninstalled) ip as my selected webcam camera and blocks Skype soon after (1-3 seconds after the opening of the video settings). I tried to make calls, it also blocks my Skype, but I can instant message, I would go back to 6.18 Skype and make it work.

    Thank you

    Fixed! I had to reinstall the drivers and ip camera cards and to uninstall once more! It works fine now!

  • InDesign CC 2015 - starts not at all after the last update! Help!

    Here go us.

    Since the last update for CC, InDesign has completely stopped working for me.

    I have uninstall/reinstall several times.

    I tried to open it with another Windows user.

    I used the creative cloud cleaning tool.

    I deleted all the files of preference (including cache)

    I just reinstalled it again and again, nothing.

    All I get is a Windows notification that there is a problem with the program and Windows to send a crash report.

    Help, please!

    CC programs works except InDesign.

    Yes, you can install previous versions by opening your cc app > apps > find applications > view previous applications > install id > cc 2014

  • VMware Player installation program starts not at all on win7 Enterprise x 64

    Hello!

    My problem is, when I click on Setup nothing happens, UAC asking permission, click OK, but not even an error message... (the same scenario with UAC disabled)

    I would like to install vmware player on the host Windows 7 Enterprise x 64 (HW virtualization enabled in bios, CPU AMD Athlon X 2)

    This could be a bug in MS, I don't know, but extremely annoying

    Any idea would be great!

    Hello

    Check if you have a process named fixcamera.exe - if yes - kill

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • Satellite 3000-514 does not start - 1-1-1-1 beep code appears

    Hello

    http://forums.computers.Toshiba-Europe.com/forums/images/bn_preview.gif
    Overview

    My Toshiba Satellite 3000 514 starts each others time and gives me the following beep code: 1-1-1-1 (4 short beeps) and a black screen.

    Does anyone know what this means?
    This happens roughly every second time I try to start the PC. After l ' works again, it especially works again.

    Any ideas?

    Thank you!

    Hello

    The beep code appears especially if the POSITION cannot be passed correctly.
    If the problem is detected until the BIOS initialize the video card and the code cannot be displayed on the screen of the BIOS will play several beeps.
    Each BIOS supports the meanings of the own beep codes. For example BIOS Toshiba beep code is not the same thing as "beep code" Phoenix BIOS.

    To my knowledge the Sat 3000 using Phoenix BIOS. In this case, you can try to search in the internet for a description of the code.
    I found this site:
    BIOS beep codes

    But generally cannot solve this anomaly just average and I would recommend contact a technician with huge experience computer laptop.

  • Flash animations not starting not not in firefox

    I am unable to play any kind of base of Flash video in Firefox. When I go on sites like cnn.com or nba.com for the videos, I can see the display area of film for the video black go as if he is playing, but no content never starts. There is no audio or video. When I try to play the video in other browsers such as IE, Vivaldi or Chrome, the video plays seamlessly.

    I tried a number of attempts to address the issue such as disabling hardware acceleration, re - install the plugin, etc, but nothing seems to help. I also tried, as suggested, to reset the database of plugins, nothing helps. I say that this problem seems quite recent, as in the past two months, but he had nothing exceptional did with Firefox plugins or anything during this period. I always had a problem with flash "jumpy" videos that have been reported in other threads and he has accepted, but don't play not at all is entirely new.

    I'm on Firefox 36.0.1, Flash 16.0.0.305 and Windows 8.1x64.

    Thanks in advance.

    It seems that the issue has to do with the plugin HTTPS Everywhere. I used this plugin for a while and not think of anything to her, but I realized that I had not crossed and turned off all my plugins individually and tested things. With this disabled plugin, videos play normally now and are back for the periodic behavior of "jumpy" I got to know.

    My apologies for not trying this before posting.

  • Firefox does not start (not safe mode), but uses the CPU

    I have the latest Firefox 25.0 (and the last Flash 11.9.900.117) on Windows 7 and the following behavior is reproducible. It started not too long ago.

    At first when I launch Firefox, nothing appears no matter how often, I restart. I see in the list of the process firefox.exe to 25% of the CPU, 2 x FlashPlayerPlugin_11_9_900_117.exe (CPU 0%) and plugincontainer.exe. No matter how many times I killed all of them, would not restart Firefox.

    The following also not help in this situation:

    • Starting in normal safe mode: Firefox opens a window but immediately freezes and does not respond. The process list shows the same process even if I find the unexpected FlashPlayer.
    • Disable plugincontainer: same results (just without plugincontainer.exe)
    • Uninstall Flash: Same results (just without FlashPlayerPlugin)

    The following can start Firefox only once:

    • Starting in SafeMode but select "Reset Firefox": Firefox does not start right away, however. Nothing happens, and you have to kill the process. However the very next time you launch Firefox in the normal way, it works fine (but it shows FlashPlayerPlugin.exe in the list of unopened Windows process despite the tab). Unfortunately, after closing Firefox the process (Firefox, FlashPlayerPlugin) are not deleted. I kill and the problem with Firefox do not leave reappears.

    In case you use "clear history of Firefox closing:

    • do not delete Cookies

    Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

    Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

    Create a new profile manually (and not via the reset) as a test to see if your profile is the source of the problems.

    See "create a profile":

    If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

    After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

    You can not

  • I tried to start Firefox, but all I get is the error message below

    I tried to start Firefox, but all I get is the message below:

    "Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

    I reinstalled Firefox and restarted my PC but I STILL get this message.

    I checked in Windows Task Manager, but Firefox is NOT listed as a running process.

    Have you any suggestions please?

    There are a few possible causes for this, all the details are in the section of the error message "Firefox is already running but is not responding" - how to fix .

Maybe you are looking for

  • Time capsule - connection problem

    between my IMac and time capsule ethernet cable does not connect. Airport utility cannot find the time capsule. I tried another cable - also unsuccessful. Any suggestions to fix the problem? He had worked so well until I had to unplug from the time c

  • Presentation of connector to the front panel DC7700

    Hello Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tel

  • Problems with tdms built executable; memory.cpp write error

    Hello I have a problem with writing tdms files in bed which executable, that I created with the Builder application in LabView 8.2.1. I created a small requesting readings some channels in the DAQmx. This schould results written in a PDM file. All th

  • HP Pavilion 15: bios password lock

    Hello is could someone please help me access my bios as I do not know the password. Lock code is 67976899 Thank you

  • Horizontal lines on start screen

    I started to get horizontal color lines when my computer starts. They sometimes completely hide the Welcome screen, but once I managed to log on all the normal functions are not affected. Someone told me it may be dust affecting the graphics card and