Similar Questions

• Satellite A200-130: can I overclock the bus 667 Mhz front

  Hello

  I have an A200-130 with Core Duo 1.86, which runs on a 533 bus, but as 945 GM Intel chipset supports 667 Mhz tp bus. Then, there are the possibilities of overclocking?

  Forgotten man. Computers portable overclocking are not possible.
  These procedures are possible on the desktop because the card BIOS mother different desktop provides the necessary adjustments, but the BIOS of computers laptops don't support these options!

  So he just said; is not possible

• Satellite L30-134: is it possible to determine the frequency of 533 MHz RAM?

  Hello!

  I have Satellite L30-134 and used a module of 1 GB / 667 MHz (sic!) for a while. Same Toshiba says maximum speed 533 MHz memory he recognizes module PC-5300 and sets exactly to 667 MHz.

  I decided to increase the RAM and bought another PC-5300 1 GB stick.
  ... RAM is only 1 GB with two modules together. The two sticks are OK - L30 sees 1 GB and works well with each of them separately.

  I know that the reason is that Toshiba couldn't work with greater speed on the two banks (or something like that).

  So. It seems to be a good idea to set the frequency of 533 MHz and it should work.
  The only question is to know how to do it? BIOS Setup is almost empty and does not have these settings.

  One advise, please (except to buy sticks more :)

  Hello

  Laptop Satellite L30-134 is a processor 1.5 GHz of Intel-Celeron-M (Yonah).
  Is this good?

  This processor supports a 533 Mhz bus and if you use modules of 533 Mhz RAM then will automatically solve this value!
  Simply put, you do not need to change anything manually! Everything is controlled automatically.

  Concerning

• Satellite A200-13O: need some answers on the upgrade of RAM

  Hi there everyone,

  I bought the Satellite A200-13O and I found in the forum Jayjay says:

  Bq. "the laptop can be upgraded up to 4 GB (2 x 2 GB). But the Windows operating system will not recognize the full 4 GB. He acknowledged only 3 GB due to the limitation of the 32 bit OS': 0

  Q1 - is saving 1 GB of RAM cause any problem, when is not used?

  Q2 - can spare 1 GB waiting in my book up is 32-bit upgrade to 64-bit?

  Q3-How can I upgrade CPU 32-bit to 64-bit?

  And just need to confirm a report of R2D2 on notice the guy with A200 - 14 d that have 'problem with RAM', which is similar to my confusion-

  Bq. "... The laptop was equipped 667 Mhz modules, but the FSB supports 533 Mhz max. That's why the modules run max with the speed of 533 Mhz (dual channel)... »

  Q4 - can I install 2 x 2 GB DDR2 667 MHz PC2 - 5300 SO - DIMM despite FSB run just 533 MHz?

  PS: could you recommend good antivirus, I am not satisfied with norton because it is really really really slow!

  Thank you all for the advice (!)

  Hello

  This article may be interesting for you
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  T1 NO.
  Q2 Yes
  Q3 as described in the technical paper 4 GB will be recognized if you install Vista 64-bit.
  Q4 Yes as you can.

  Antivirus, for me, is better AVIRA antivir - http://www.free-av.de/en/index.html
  The application doesn't have a lot of resources and works perfectly. I use it for years.

  Good bye

• Re: Satellite Pro L300D - 11O 800 MHz RAM installed, only to 667 MHz

  I recently bought a Satellite Pro L300D-11O, which has a single stick of 1 GB 800 MHz RAM installed. However this RAM work only at 667 MHz. I checked this in Linux and Windows Vista.

  The laptop is announced as to have 800 MHz RAM on this page:

  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 1055796

  The manual of the user who wrote:

  "PC2-6400 memory module works as PC2-5300 speed the GL40 Express Chipset Express chipset/GL965"

  I don't know what chipset I have, and it would be surprised that this would be the case that the above Web site explicitly states RAM 800 MHz.

  Can someone tell me please?

  Hello!

  Now I'm a bit confused of Mr. I think you did search in the wrong user's manual because the Satellite L300D has no Intel chipset.
  On the Toshiba site, you can download the manual for Satellite L300D:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online download user manual

  I think that your chipset only supports 667 MHz. normally the RAM always works on the highest speed that is supported by the chipset.
  Check the specifications with Everest or PC Wizard 2008.

  Good bye

• Is Satellite A200 supports 4 GB 800 Mhz RAM

  Hello
  I have the Satellite A200 - 1 m 7 with only 1 GB of ram and I think to upgrade to 4 GB of ram.

  My question is:
  It is supported at 4 GB of ram, or it won't work?

  And it is supported for ddr2 800 mhz memory speed?

  Thank you

  Hello

  It depends on the bus front end (FSB) If your FSB supports 800 Mhz then you can use these modules and the modules would run at full speed.

  According to this page, the laptop can be upgraded to 4 GB.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=32477&ft=m&St=3

  But note; 32-bit Windows will not be able to use the full 4 GB of ram due to the limitation of 32-bit.

  Best regards

• Re: Satellite A200-1IZ - can I install RAM 800 MHz?

  I have a Satellite A200-1IZ and I want to change my orginal RAM memory 2 x 1 GB 667 MHz DDR2 2x2gb 800 MHz DDR2. It will work properly with 800 MHz?
  Here's something on the processor and RAM:

  Intel Centrino Duo processor with Intel Core 2 Duo T7250 processor technology, card WLAN Intel Wireless WiFi Link 4965AGN and Intel PM965 Express chipset
  Clock speed: 2.0 GHz
  FSB: 800 MHz
  level 2: 2 MB cache
  Standard system memory: 2 048 (1 024 + 1 024) MB
  maximum extension: 4 096 MB
  technology: DDR2 RAM (667 MHz)

  Hello!

  Theoretically, you can use the 800 MHz modules because they are compatible downgrade. This means that the RAM is also able to run at 667 MHz. as much as I know that the chipset supports only up to 667 MHz speed and you won't see a performance gain and you can also buy some RAM to 667 MHz.

  In any case, I have good experience with RAM Kingston. I use the modules of this factory always for the upgrade of my notebooks.
  Maybe this information is useful for you

  Good bye

• Satellite A200-1CR: I'd like to expand my RAM to 2 GB or 3 GB memory

  Hello.

  I have toshiba satellite a200-1cr. I'd like to expand my ram up to 2 or maybe 3 GB.

  Can anyone tell me what kind of ram I should buy, type, etc...?
  Also I don't know if I have 2 x 512 MB or 1 GB.

  I have a free slot or I have to remove one of my 512 ram?

  Thank you
  PS: I can't find my model in the toshiba Web site more... (model. psae0e No.)

  After a long investigation and after visiting various websites I found the info that this laptop was equipped with 2 x 512 MB DDR2 (667 MHz) modules

  So if you want to upgrade the RAM you can use 512 MB, 1 GB, or 2 GB modules.

  Have a look here:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=30728&ft=m&St=3

• Question about upgrading RAM on Satellite A200-1CR

  Hello

  I have the Satellite A200-1CR, PSAE0E-02G01TSK
  I have 2 GB of RAM
  I can install 4 GB of RAM (because I try 2x2Gb 800 MHz) and don t work.

  Do I only 667 MHz or my laptop supports only 2 GB?
  Thank you

  Hello

  Your laptop can be upgraded to 2 GB top only and for the upgrade you must use 667 MHz compatible modules.
  To correctly update I recommend 2 X 1 GB DDR2-667 with PA3512U-1M1G part number.
  Good bye

• Satellite A100-847 does support 667 MHz RAM

  The A100-PSAA9 (A100-847) supports the 667 MHz RAM? The FSB is 667 MHz, but the laptop comes with 533 MHz RAM and everywhere that I looked for upgrades of RAM I've seen 533 MHz for this model.

  memory Finder: http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=25716&ft=m&st=3

  Hello

  It should be able to use the Ram 667 MHz module, but the difference between the 533 MHz and 667 MHz is not noticeable.
  I think the 533 MHz module is great and you are on the good side, if you use the modules to recommend Toshiba.

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Satellite A200-10W and 64-bit support

  Hello

  I bought a Satellite A200-10W and I replaced the 1 GB of RAM with 2 x 2 GB RAM cards, but I don't see a 3.07 GB of RAM. This means that the processor architecture is 32-bit, and he cannot use a 64 bit OS or what?

  Please notify.

  Thank you

  Hello

  I think that the answer to your question, you can find in this document http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Good bye

• For a machine Dell Optiplex GX280 Pentium 4 FSB 533 MHz processor

  I have a list of upgrades possible for a Dell Optiplex GX280 (mini lathe) computer cpu, and each of them work at a FSB 800 frequency, even if the motherboard supposedly welcomes 533 FSB freqs, at least for the part of memory RAM.

  My question is if I can use a CPU like the one shown in the link next to the official site of Intel for a Dell Optiplex GX280 machine:

  http://Ark.Intel.com/products/27462/Intel-Pentium-4-processor-524-supporting-HT-technology-1M-cache-3_06-GHz-533-MHz-FSB

  And if the answer is YES, you would it be a good idea as far as goes the temperature of the cpu, I mean if I use a 533 FSB CPU and memory 533 mhz RAM?

  The Spec, I would say that it should be good. BIOS must be updated to the latest version before changing CPU.

  http://downloads.Dell.com/BIOS/GX280A08.exe

  2 Heatpipes sounds like no tour DESK.

  W4254 Dell Performance radiator is on the tower.

  

  No tours will STOP not supported CPUdue to size of power supply for more than 2.8 Ghz processors.  280 come in 2 round The Mr Smith Tower and flavors jump Tower.

  Regulatory model (Mini-Tower): DMCARM or DCSM1F

  Regulatory model (office): NAED or DCNE1F

  (Small footprint) regulatory model: DCCY or DCCY1F

  Model regulatory (Ultra Small Form Factor): DCTR or DCTR1F

  

  

  http://Ark.Intel.com/products/27459/Intel-Pentium-4-processor-520-supporting-HT-technology-1M-cache-2_80-GHz-800-MHz-FSB

  http://Ark.Intel.com/products/27462/Intel-Pentium-4-processor-524-supporting-HT-technology-1M-cache-3_06-GHz-533-MHz-FSB

  http://Ark.Intel.com/products/27464/Intel-Pentium-4-processor-530J-supporting-HT-technology-1M-cache-3_00-GHz-800-MHz-FSB

• Satellite M70: Memory 533 MHz with 667 Mhz compatibality?

  Hello
  I bought the new Satellite M70 (PSM70) 1.7 Ghz (400FSB) with the construction of memory DDR2 PC2 512 MB 533 MHz, if I DDR2 1 G 667 Mhz added to it? the Mhz will be a problem? and why the standard memory 533 Mhz and 400 Mhz processor speed?

  Kind regards

  Hello

  In my view, you must use the Toshiba recommended of the memory modules.
  AFAIK you can use DDR2 modules like these:

  DDR2 -400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  To my knowledge, the device supports:
  Intel Celeron M up to 1.7 GHZ 0.09u CPU, 1 M L2, at 400 MHz FSB
  Intel Pentium M CPU up to 2.26 GHZ 0.09u, 2 M L2, 533 MHz FSB

  Therefore, it is possible to use 400 and 533 MHz memory speed.
  You can also use the modules of Kingston. The performance is optimal.

• Can I combine DDR2 667 MHZ DDR2 800 or lower on the Satellite A200 - 1 MB?

  Hello guys

  I have a Toshiba Satellite A200 - 1 MB and my uncle also has a hp Pavilion dv6183ea
  and we are facing the same problem, the computer is delivered with 2 x 512 DDR2 667
  We have to increase the Ram but the Ram DDR2 667 is no longer available in our market.
  The DDR2 800 is available
  can I safely use the DDR2-800 on my A200 - 1 MB or use the combination of DDR2 667 with a new DDR2 800 with no problems on my computer or on the computer of the uncle?
  I have windows vista and uncle is windows xp

  Thank you

  Hello

  Usually, you can use modules of RAM and faster RAM module (in your case, DDR2 800 Mhz) would be clocked at 667 Mhz.
  But in many cases, there are problems of compatibility in many cases, the laptop will not start using different Rams.

  So I think that it of better to use exactly the same RAM modules to avoid these problems, but who knows, maybe you could mix without any problem, you will have to try this out!