Satellite A200-14F - standby and hibernation does not work

Similar Questions

• Re: Satellite A200-1Mes: XP audio driver does not work

  Hello
  I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
  Can someone tell me where to find a driver?
  Thank you.

  I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• Satellite A200 - 1 GB: my modem does not work - remote computer is not responding

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly.
  I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine.
  I mean that he can call on a mobile phone or phone of the Earth.

  A few times he suddnely connects but connected sppedis 24kpbs.

  But the same phone line works correctly with my modem office both as the same as another modem from the laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Hello

  I don t think that the modem would be malfunctions.
  Fact is that if you use the wrong modem configuration, the line may be busy and the modem would not answer.

  I recommend you configure the modem again.
  In programs-> Toshiba-> Networking, you would find the Modem region Select utility that must be configured for the same country.
  Delete the existing profile and create a new!

  Best regards and good luck

• Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

  I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

  What can I do?

  Hi navarone_1,

  This means that the work of FN keys and you can t use the pad touch, right?

  Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

  You can find all the drivers and tools for your laptop on the Toshiba official European page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

  Last but not less than first installation package of added value and Flash then cards support utility.

• Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

  After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

  New value pack installation has not been successful.
  Moreover, after upgrading the drive to DVD from Toshiba is default, too.
  Who can help?

  I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

  When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

  As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

  DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

  As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

  Bye and I hope that you report your experiences with the Vista upgrade again.

• Satellite A200 - 25 X - remote control does not work on Windows 7

  Hello

  I have a Satellite A200 - 25 X (originally performed with Vista) and just installed Windows 7.

  Problem is that now my remote (model No. G83C0008A110) no longer works. So far, I have not found all the drivers for the remote control.

  I hope someone here can help me.

  Thank you

  Hey,.

  Have you ever seen the Toshiba driver download page? You have an older model laptop, so pilots are moved to the archives, but it is possible to download all the drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Satellite > Satellite a series > Satellite A200

  Check this box!

• Satellite A200-12 x starts but does not work

  Hello

  I had a satellite A200-12 x for almost a year with no problems at all until now.

  Since a few days ago, the computer starts up but when I get the password for my user it stops near work. The hard drive light stays on no - intermittently and made a little sound of cracking at regular intervals. It takes the computer more than 10 minutes to let the blue startup screen, then that more than a half hour to show my desktop. The hard drive light will occasionally be blink, which is when the computer appears to contribute normally, but only for a second or so. When I gert on the desktop, the light remains the same way and I can't work with it at all.

  It works ok in safe mode. I tried to restore the system, but it does nothing.

  Can someone help me?

  Thanks in advance

  What you mean to restore the system? Did you install OS using DVD recovery delivered or just roll back the OS to an earlier time using System Restore tool?

• Satellite A200-1VP - new WiFi card does not work

  Hi all

  I just bought an intel 4965agn wireless card to replace the original card intel 3945abg. I bought the card on ebay, it's a computer dell laptop.

  I installed it (connecting the black wire on pin 2 and the white wire to Terminal 3). The device appears in the device manage correctly without any problem. I installed the latest driver from intel for this card.

  the problem is that no wireless connection cannot be captured. the utility intel built in diagnosis, the card seems to fail the test of material. The section troubleshooting said to check the Device Manager and install the appropriate drivers. I've done it before, so I'm not sure of the problem.

  any ideas?

  Thank you

  Hi ansarali,

  Why you traded a new WLAN draft N card if you can t use it? I want to say that your laptop was only equipped Intel abg card and for standard project you also need 3 antennas and as much as I know Satellite A200 are not equipped with 3 antennas

  In addition, the antenna cables must be connected correctly. This means that you must connect the white cable to the HAND and the black cable to the auxiliary voltage
  Check this box!

• Satellite A200 PSAECE: Dual Mode Pad does not work XP

  Dear friends,

  My dual pad to stop all of a sudden.
  I reinstalled the on/off button and touch pad drivers. But still nothing.

  Y at - it a specific to the driver or software for the pad dual mode?

  If Yes, what is it?

  Thanks in advance!

  My OS is Windows XP SP2.

  Laptop model: Satellite A200 PSAECE (1 g)

  This laptop has been pre-installed with Vista am I right?

  It s I knew not what application you have installed or what drivers are missing on your laptop, but you must install the Synaptics and Alps Electric Touch Pad Driver to use the touchpad.

  In addition, the BIOS must be updated to version XP.

• Satellite A200 + Vista Ultimate - power management does not work

  No matter what I apply to the power management settings of the screen never goes and the PC never sleep or standby extended. Screen saver does not either - except once - yesterday, for the first time since I bought the PC in August. Has not yet done.

  I assumed that this is a bug in Vista. "Tech Guy" PC World (ha ha) cannot repair. Is it at the level of the BIOS or something else? Of course, there is an incompatibility between the OS and the hardware. Video chipset? If you choose a balanced power management, the screen slightly off if you take out the power cord, but that's all that happens. Power management is all set to default.

  It's exhausting, because whenever I want to leave the PC for a while, I have to put it to sleep manually.
  Anyone got any ideas?

  Thank you

  Peter

  Post edited by: admin

  Hello Peter

  First of all are the guys responsible for tech updates? They must offer that you support for the hardware you have and clarify also all problems, if you use a preinstalled recovery media.

  Upgrade is your decision, and it is possible that it may have some negative influence on the functionality of the OS. All this is quite complex. As you know Vista has own power management options. Toshiba install PVAT (ValueAddedPackage) and after doing this there are some additional settings.

  The question is: How did you get the OS upgrade? Did you do a clean install? Have you installed all the stuff from the download page of Toshiba including VAP?

  With other words: all the basic settings on energy consumption are defined in the BIOS. AFAIK in Vista is the management of clean energy implemented and Toshiba installed just a plugin. If these rudimentary BIOS settings are not changed, I guess everything works fine. Change the settings of the BIOS with an update, I can imagine that different settings will not work correctly.

  Hmm, that's really not easy to say what you can do. Maybe check for the last update of the BIOS and after doing that it is trying to put the clean install of Vista Ultimate. And, of course, you must install all the stuff from Toshiba following the document of instructions for installations.

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• Standby and Hibernation are not working

  I got my laptop from my college. It was a v7 Aspire 481p with 8 pre-installed windows. I wanted to install linux and the system has failed because of the "Secure Boot" functionality in the UEFI Bios. So I went in "Legacy" mode Now, the system is not started. I had a Windows 8.1 so I used it to start my system using a Bootable usb key with the bios in "legacy" mode

  8.1 windows successfully installed. Use the key that I had extracted from windows 8 using software "produkey" after installing windows 8.1. And 8.1 of windows has been activated. The system has 500 GB HDD + 23 GB SSD. Now, it's almost works very well and the bios is in "Legacy" Mode I have not yet installed linux. At the time current Backed up all my data on an external HARD drive.

  It is:

  
  I installed some drivers I downloaded at acer for windows 8.1. The problem is that the system does not properly in mode 'sleep' and in hibernation mode. In both cases, the screen turns off leaving power on the system. 

  Here are the screenshots of the list of the installed software before and after:

  Front (with UEFI Bios, windows 8)

  

  After that, now (present condition)

  

  The system is still in ' traditional '.

  Apparently, I have installed some drivers because I thought they might not be important, but I'm going to install all drivers and system software in the screenshot before.

  Help me, I would like to know where I am going wrong. I also want to install linux and UEFI with secure boot doesnot allow.

  Also let me know is to "legacy" mode has drawbacks. Speed of the system was unaffected much after the change in legacy mode in the bios.

  Expecting a quicker response.

  Thank you.

  Hello...

• Satellite L300-245 - LAN and WLAN does not work

  I bought a laptop L300-254.
  I installed the LAN and the LAN driveres wireless, but none of them works.

  What is the problem?

  > I installed the LAN and the wireless LAN drivers, but none of them works.

  What does that mean? Are card WLan and LAN card not recognized in Device Manager? Are there near yellow exclamation points mentioned cards?

  Or maybe the WLan and LAN card are recognized correctly, but you cannot connect to the internet through WLan or LAN?

  In this case, you should check the router settings and configuration!
  For me, it looks like the issue of the router if the two connections (Wlan & Lan) n t work!

• Satellite A200-209 (ETA) shortcuts keyboard does not work in Windows 7

  Hello

  I have a problem with the hotkeys (Fn + some button) - they do not work.
  I think that the update of the bios can help, but I can't find the bios for Windows 7.
  I'm wrong or updating the bios will not help?

  Thank you...

  Hello

  I doubt s BIOS problem running Win 7.
  You need VAP (value added package) and utility of Flash memory card Support.

  I installed VAP and utility Support Flash Card which are released for other series laptop because my laptop is older and Win 7 tools are not out on my model.

  However, I chose the VAP and Support of Flash Card Utility for L500
  It worked.