Satellite A200-23W - is it a new BIOS update?

Similar Questions

• Dead by Satellite A200 - 1 c 3 after involuntary Bios Update

  Dead by Satellite A200 - 1 c 3 after involuntary Bios Update!
  Help, please!

  Hello

  It's a shame, but it seems that you need a help of a Toshiba ASP. technicians
  In the best of cases, only the ROM module must be flashed once more in the worst case that the motherboard could be damaged. :(

• Satellite A200 (PSAFCA) does not work after BIOS update triying

  Hello

  I was hoping if someone could help me pls.

  I have a Toshiba Satellite A200 (PSAFCA).
  Recently, I tried the bios update and while I flashed the bios I forgot to plug the laptop into the current and the battery was flat at half way through the flashing.

  Thus the laptop now won't post when I turn on and all I get is a white screen.
  I was wondering if someone could pls advise me on how I can get the old bios back or even a method of flashing it if I put the bios back in so I can at least get a message to display on the screen.

  Any help that you provide would be greatly appreciated as I am at a loss.

  Thanking you in advance

  muzzy001

  > while I flashed the bios I forgot to plug the laptop into the current and the battery flat at half way through the flashing.

  Well buddy, the cell must always be connected to the mains during the execution of an update of the BIOS! This is very important!
  Now it looks like the update of BIOS didn't t run and finish correctly and the ROM module seems to be flashed incorrectly.

  Unfortunately, there is no other solution to communicate with ASP guys and ask for help! They should be able to help you.

  But note; in the worst cases, the ROM module is unfortunate and the motherboard needs to be replaced.

  Good luck

• Satellite A200-130 - had black screen after BIOS updated

  I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

  BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

  Now my laptop remains the same... just 'black screen '.
  Can someone help me on this matter? I really need this laptop to be repaired.

  Hello
  I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
  UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
  I'll send it to ASP.

• Update satellite A200 - 14F CPU T7400/T7600 and BIOS update

  Hello

  I want to upgrade my current Core Duo T2450 CPU to something faster or T7400, T7600.

  I know that PM945 will manage it but what about the BIOS? I have 1.80 which is the last for my model.

  Where can I find that some BIOS change log to see if the newer processors are supported?

  Are you sure that you want to upgrade the processor?
  An upgrade of the CPU will not bring much more performance but mobile CPU's are fairly expensive and maybe they are not supported in the BIOS or motherboard.

  Moreover, Toshiba doesn't support a CPU Exchange. You can do this, but at your own risk.

  Normally a BIOS change log you can find on the driver of Toshiba download page, but if you can find t we Web does not exist on the site.
  But I'm pretty sure that Toshiba doesn't add new taken processors supported by a new BIOS because it s not supported.

• Satellite A200: Some collapsed devices work after BIOS update

  I've recently updated my BIOS to V2.60 on my Sat A200
  but ever since I have apdated BIOS some hardware components stoped working.
  So I decided to use the product recovery CD but it no longer works.

  Whenever during the loading phase of the system breaks down and I get a blue screen mentioning a file called CLFS. SYS in the root of the problem

  Is there a solution to my problem?

  Hello

  What Sat A200-xxx you have exactly?
  In my experience, there are different versions of BIOS for different operating system.
  The Vista and XP needs the different BIOS!

  But I wonder why the Toshiba Recovery disk not working anymore?  :|
  Usually, you should be able to not recover the system no matte what BIOS was installed.

  Have you tried to format the HARD drive first using another disc for example like Win XP?
  Check it!

  I think you need to format the HARD drive again and then should try to recover the laptop using the recovery disk

• Satellite A200 - 1 GB block during the bios update - will not turn on

  Need help please, I was updating of the bios. And the process is stopped at: 2/18. I wait an hour and i decided to turn off the laptop. Know I can't turn on. Nothing happens. Anyone know how the recovery mode?

  Thank you

  (Sorry for my bad English)

  Josefa Hello,

  It sounds as if you of the BIOS chip was damaged during the attempt to update failed, and unfortunately this will prevent you from starting your laptop so that you can tyr to redo the update.

  In my view, that it will be necessary to bring or send the laptop to a Toshiba authorized service agent who has the equipment necssary to re flash your BIOS chip.

  Kind regards

• Satellite A200-1AE (PSAEC) - when the new update would be available

  Hello.

  I have Toshiba Satellite A200-1AE (PSAEC) and the latest BIOS is since 2007.

  Toshiba means update?

  I think that old "deserts" Toshiba series and that he cares only for new.

  Unacceptable

  Hi mate

  Why should Toshiba BIOS update?
  There's a problem with your laptop that should be solved by the BIOS updated?

  To be honest, I don't know if the new update of the BIOS would be available for an A200 but if something would not would be not wrong with the old BIOS Toshiba provide an update
  One of my friends has a laptop A200 and its working properly

  Welcome them

• Satellite A200 23W stop seconds after pressing the power button / stop

  Hello all :)

  I just bought a laptop Toshiba Satellite A200 23W a few hours ago.
  I turn it on and let it complete the installation of Vista.

  After the installation of Vista finishing it asket to resturn laptop and from that moment, the laptop is "dead".
  After pressing on restart the computer (from Vista) computer turns off without problem, but he never did it again!
  After a few minutes of waiting, I tried to start it by pressing the power button.

  Now when I press the power button, I can hear the HDD work and most of the time until I see something on the screen of the laptop computer stops!
  Now, I noticed that both the battery indicator AND the DC IN light are hot flushing and stop Flash at times.
  Reading the manual, I guess that the DC IN indicator should Flash in all not well.

  I tried to uninstall the battery and try to start the laptop, but in this case I can't even listen to the HDD, commissioning!
  I try to unplag and replag (on the laptop as well as Jack) power cable but again no result.

  Any ideas of what past?
  Thank you very much

  I don't know what the problem is here and, in my view, should not be so important to you. Contact your dealer as soon as possible and to talk with him. Explain the situation. You will get may be new notebook. Otherwise, please contact the nearest authorized maintainer and let check your laptop.

  The laptop is brand new and it should work. Please do not wait too long.

• Satellite A200 23W: XP-> Bluetooth question and mass storage controller

  Hello

  I have a satellite A200-23W and just installed Windows XP SP2 and the problem is:

  1. that i can't see the anyware bluetooth (I istalled the monitor bluetooth from the web site of the Union European toshiba)

  2. also, in Device Manager, I see that the mass storage controller needs new drivers but I can't find?

  Thank you

  Alex

  Hello

  With regard to the point;

  (1) the laptop supports BT certainly then have you installed Bluetooth driver too?
  BT monitor is a utility to control BT, but to use the BT, you need the BT stack!

  (2) this unit is probably the module of Robson former Turbo Memory.
  This material is only supported by Windows Vista.
  There is therefore no Windows XP driver.

  See you soon

• Satellite A200-23W - SATA1 or 2 interface?

  I would like to be sure which is the right SATA for my Satellite A200 23W, bought 2 years and a half ago. What is SATA2? I installed an SSD 60 GB drive with Windows 7 64 bit, but I don't know about the SATA mode I.

  FYI SSD (OCZ VERTEX 2 SATA II 2.5 60 GB) works well since I did the installation (3 days ago)

  Hey,.

  You can use two SATA standards, because the connector is the same.

  If your laptop can handle SATA 1 readers, all SATA 2 drives are compatible downgrade so no problems at all! :)

• Satellite A300-1MS - I want a new BIOS with fan control

  Satellite A300 - 1 ms PSAG8E

  New BIOS with fan control, please.
  Thank you.

  Why Toshiba should make a new BIOS just for you?
  You have a problem with the fan?

  I put t know what OS you use, but you can change the method of cooling with Toshiba Power Saver. On both my Toshiba notebook, I use this tool and I like it.
  You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Extension memory for Satellite A200-23W

  Wonder if I can upgrade memory (now 2 x 2 GB at 667) with two others at 800 mhz...

  Hello

  You can upgrade the RAM with 800 MHz modules, but as much as I know this will not improve the speed and the RAM will run at 667 MHz.
  The reason is that the chipset doesn't support 800 MHz.

  Satellite A200-23W supports up to 4 GB, so any update is not necessary.

  Welcome them

• Re: Satellite A200-1DY - Vista 64bits 2.60 Bios is the same as 2.50?

  Hello

  I have a strange problem in my Satellite A200-1DY, last Friday I tried to update my Bios.
  First of all, I had a problem, I couldn't update because it gives me an error:
  + Update error - 200 has no update + or something like that of error checking.

  Then I disabled in the winplash check option and everything works well, it seems like updating all blocks and finally the program restarted laptop but Bios still version 2.50 and it seems like nothing has changed. I didn't understand anything.

  I have Vista x 64 but my computer was installed Vista x 32, and the strangest thing is that if I try to update the Bios after that format whith laptop Toshiba cd recovery Vista x 32 everyting works fine and I have no problems.

  Hello

  Just a note; Satellite A200-1DY belongs to the series of PSAE3.

  The Toshiba page provides three different BIOS for this laptop.
  Currently, there is a BIOS 2.60 for Vista 32 bit and 64 bit and 5.6 for Win XP.

  Three BIOS versions are different, and if you use the Vista 32-bit, you must use the BIOS designed for Vista 32 bit.

  BIOS 2.5 is not the same as the BIOS 2.60 I think there is a difference

  However, as far as I know the 32 bit Vista was preinstalled on this A200 series and the recovery disk should also contains the Vista 32 bit.

  I put t know why the 2.5version is always visible on your A200 but I guess the BISO update has failed and may be related to the fact that the winplash check option has been disabled.

• How to disable alerts on new BIOS update Toshiba TEMPRO

  Hi just installed TEMPRO on my laptop W8 Satellite L875, Ant, IE there is a new bios update available - (1, 60 - WIN), which is the same version I already have. ? : |

  Q: How can I do this go-away alert?

  -Tom

  Hello

  TEMPRO would run and started at the beginning of the startup procedure.
  So, you can disable the Tempro to start automatically.
  You can disable this in msconfig-> Startup tab

  You can get Tempro process here and uncheck the brand.
  Restart the unit.