Satellite A200: games play only in the center of the screen

Hello

Can someone help me.
We use Vista and educational games to my son only play in the central panel of the screen.

How to enlarge?
I have change the compatibility mode, without success.
Games worked on our another computer with vista, so it's something to do with the settings of Toshiba.

Any suggestions?

Teena

Hello

Generally, the game settings supports certain options that should allow you to stretch the display mode.

You need to look something like: mode full-screen.
Also try to set the display on a lower resolution.
After you have reset the screen resolution in Windows, set the game to use the same resolution that is currently used in Windows.

Your comments would be very appreciated you...

Tags: Toshiba

Similar Questions

  • Satellite A200 - please I need help, the screen goes pink and green

    Hello world

    I have a Satellite A200 and I have a problem with my screen. It appears suddenly pink and green and it resolves on its own or when I close the lid. It starts from the Toshiba logo before windows logon. Please help me, thanks in advance.

    Hello

    You can try to find what's wrong with your laptop if you would connect it to the external monitor.
    If the same question would be visible on the second, the external monitor then this screen problem could be related to the graphics chip.

    If the image on the external monitor would be nice laptop computer s internal monitor could be faulty.

    However, in both cases, you must contact the ASP in your country for replacement.

    Good luck

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

  • Satellite L - small green dot on the screen

    I just started my new computer and on starting the loading screen (black screen), there seems to be a small (possibly green) point that is at the top of my screen and noticeable only when the screen is black.

    It will become more serious and is what I can do to change or is this something I need to worry? I would like to know as soon as possible, as if I need to send my computer back, that I'd rather not do something more about it.

    Thank you

    Zoe

    Hello

    I think you mean a defective pixel. Is this good?

    These bad pixels are pixels on a screen LCD does not work as expected. This can happen on all LCD s and there are different pixel fault classes.

    LCD has millions of pixels and if you have a single defective pixel, everything is ok. On my Satellite L300, I also have a defective pixel but I see that if the screen is black. T, you can return or Exchange the laptop with a defective pixel only.

    Here's an interesting document:
    http://APS2.toshiba-tro.de/KB0/TSB9502LZ0000R01.htm

    Good bye

  • Satellite A60-122 - does boot and the screen has lines on it

    Hello!

    I have a Toshiba A60-122 PSA60E model. Pentium 4 HT. 1 GB of memory, 80 GB hard drive. BIOS 1.7.

    The problem is that it hangs on until the Windows XP logo appears, then the choice of Windows is displayed, I try safe mode, but does not work either.
    And then decided to have a specific format but still the same problem, and even the recovery CD does not either.
    I noticed that the screen has lines on the subject. Toshiba Logo appear when booting, you can see the columns of the row.

    Can someone help with my problem? Any idea?
    And by the way, I want to update my bios to 1.9, but the problem is that I can't find the traditional BIOS update on initialize to top.

    Thank you.

    Do you have these lines of the screen on an external monitor too or only on the screen LCD internal?
    It sounds like a hardware problem, but if you can determine if it s a LCD or motherboard problem. Check it!

    And by the way, what do you mean if you say that it doesn't work? You can see something on the screen and you get a BSOD?

    Maybe the problem is with the motherboard or HARD drive. You can test the HARD drive by using the Drive Fitness Test (Google is your friend).

  • After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

    After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything

    Hello

    1. what operating system is installed on your computer?
    2. is it works much earlier?
    3. don't you make changes before the problem?

    Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Update of your display drivers and check if the problem persists.

    Step 2:

    Reduce hardware acceleration and check.
     
    a. click the Start button, Control Panel.
    b. now, select appearance and personalization. under display, select adjust screen resolution.
    c. now, select adjust the resolution.
    d. click Advanced settings.
    e. now, click the Troubleshooting tab, and select the change settings button.
    f. in the Security dialog box, click on continue.
    g. move the hardware acceleration slider to the third notch.
    h. click OK.
    i. restart Windows.

    Step 3:

    If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.

  • Satellite A200-23: noise Anoyed when the speakers are not set to mute - Win7 64 bit

    When I leave the table of sound mixing (_without mute audio on microphone_) there is a noise very disturbing speakers.

    Windows 7-64 bit, that's what I installed in a Toshiba satellite A200 23W and I don't have any other problem except micro that it does not work on SKYPE.

    Sound alone, works very well, as soon as I hear anything * when I muted microphone *!

    Is this all I can do?

    It is not easy to give you an answer. I don't have that kind of problems on my Satellite phone and Skype works perfectly (audio/video).
    Have you tried to play a bit with the sound and the Skype settings?

    You hear the sound in Skype only or how to understand this?
    When you use the headset is this annoying noise still there?

  • Satellite A200 keyboard play up

    Hello

    My Satellite A200 laptop keyboard plays up. After that some time to type my keyboard getting all the capitals of the letter and then begins to highlight everything that I type when using the arrow keys.

    He also hit the 4 numbers when I use the left arrow. After this happens no keys work and the mouse will click on something and then highlight all when I click on something else. and then I have to restart or put it to sleep.

    It seems to be stuck on something, someone has any ideas?

    See you soon

    Hello

    For me, it looks like a keyboard failure and there's only one real solution; the keyboard needs to be replaced.

    In your case, I recommend you contact the ASP in your country and ask for the laptop, the keyboard check and replacement.

    Good bye

  • Satellite A200-130 - how to remove the BIOS password?

    Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?

    My laptop was asked to enter the password when I put under tension.

    Hello

    Just check this article:
    [How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]

    As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.

    So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)

  • Satellite A200-1CR does not recognize the module of RAM 2 GB

    Hello

    I have a problem with the extension of the RAM.
    I have the Satellite A200-1CR with 2 x 512 MB of RAM.

    Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
    When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
    Where is the problem?

    What should I do to make it see 2 GB?

    Paula

    Hello

    I think the answer is very simple.
    Satellite A200-1CR can be upgraded up to 2 GB of RAM.
    This means that you can use max 1 GB of RAM in one slot
    You used 2 GB of RAM and this module does not seem to be compatible
    In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

    Welcome them

  • Satellite A200 (PSAE6E) - Impossible to recognize the WLAN driver

    Hello

    I have a Satellite A200 PSAE6E with Vista.
    I want to just install WXp and erase Vista.

    When installing Xp, everything is Ok, except that my computer does not recognize my wireless card...
    Still, after the boot sequence, windows desktop appeared and a message: new hardware found...
    When I decide to do an automatic search and install... nothing.
    When I look in the control panel > Device Manager
    In the "Other devices" section appears: with a yellow network controller!
    And can't find a good driver...
    In properties, detail sheet, it is written:
    PCI\VEN_8086 & DEV_4229 & SUBSYS_00008086 & REV_57\...

    I have download all the drivers from toshiba (for XP) Download Center and I also try to download Intel drivers... NOTHING...

    Please if someone can help me...
    François

    You have installed Windows XP SP2 home edition?

  • Satellite A200-08J: how to configure the command buttons

    I read many posts but nothing seems to make sense.

    Why Toshiba would put these buttons here if they are so difficult to configure? or not able to be configured?

    FYI same Windows Media Player does not meet any of them.

    I use Vista Business 32...

    I would like to configure all the 6 buttons next to the button On / Off (internet, media, play/pause, stop, previous/next.

    Thank you...

    Hello

    To my knowledge, not all keys are configurable. The buttons like pause, play, stop, etc. cannot be configured with different functions.
    It is not possible.

    But you can use the key Toshiba control utility to configure the buttons such as Internet and CD/DVD.
    You can find this tool in Toshiba Assist-> optimize

    There you can assign new applications to these buttons.

    By the way; Satellite A200-08J seems to be a model Canadian that is why it would be desirable and recommended to use the drivers & tools from the Canadian driver page.

    See you soon

  • Satellite A200-1AI - Windows has detected the hard drive error

    Hi guys.

    I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

    I guess that's only a matter of time before things get more serious.
    Its just now that it unattached restarts automatically.
    Ive gave my laptop below specifications and the specifications of the hard disk drive.
    I do not know which drive hard im supposed to be looking at.

    I don't want to buy one and then duty send because its incompatiable.
    Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

    Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
    Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

    MODEL NAME: Toshiba Satellite A200-1AI
    MODEL NO.: PSAECE-00U00JEN

    HDD SPEC:

    TOSHIBA MK2035GSS HARD DRIVE
    CAPACITY: 200 GB
    CERTIFICATION: S.M.A.R.T
    DrRIVE ROTATION: 4200 RPM

    Hello

    The Satellite A200 supports the SATA HDD controller.
    That's why you need to buy a SATA 2.5 HARD.
    The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

    SATA controller not limited to any size of HARD drive, you can also use large drives.

  • Satellite A200-1AE shows only 3 GB instead of 4 GB of RAM

    First of all the http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm * Help *.
    (Come on security start-Control Panel of configuration-system-configuration-boot system Administrative Tools - Advanced options, make sure the maximum memory of the option is not checked. If it is checked, uncheck, press on apply, Ok and restart). -* not working *.

    I've got BIOS, Windows 7 64 bit v1.4
    BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)
    Windows 7 see 4 GB but 3 GB usable

    Please help, thanks.

    Satellite A200-1AE (http://ce.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?LNG=20&service=CE&BV_Us eBVCookie = yes & PRODUCT_ID = 127556)

    Hello

    to be honest, this problem is one of the most annoying problem as the failure of Bios in this forum.

    > BIOS see 3 GB (BIOS available on the toshiba Web site is for win XP and Vista only)

    I think that problem is in the Bios, it does not recognize the 4 GB, but only 3 GB.

  • Satellite A200-175 - recovery ends with the error message

    I bought my Satellite A200 2 years and it was the first time I tried using the recovery discs. These discs are properly kept in their original boxes before you use them (no scratches). My computer has virus and I tried to reinstall the system.

    When I started using the recovery disk, I put disc 1 into the optical drive and wait. Soon, he prompted a 'Ghost' screen and began to copy files. Everything seemed OK, but after a while, I get the following message:

    "wimcopyfileex failed...". Error image restoration... ImageX couldn't shall apply from fist F:/05366xsp.swm index 2 odd in c:

    Can anyone help? Thank you very much

    Hello

    I have the Satellite A200 and I got a DVD only. There is no ghost window. Ghost was used until the year 2005. Since then, Toshiba uses new procedure of collection called Rico or Reco. I remember more.

    Can you please send us the number on this CD/DVD recovery?

Maybe you are looking for

  • Power supply Delta

    I have food on my Mac Pro Delta; I suspect it is bad. He has four caps, all the black wires. What pins should I check everywhere for voltage? Do whatever it is must be jumped to start it? Are there common fixes? Thank you

  • 1000 errors and -54: itunes can not convert wma aac

    I installed itunes on my Windows 7 laptop that I wanted to use some of my vast library (currently in Media Player wma format) on my iphone. Whenever I try to add a file (or folder) to the library, I get a message saying that itunes will convert to AA

  • Should TravelMate P645 - I NFC?

    I have a TravelMate P645 (full HD model with i7, SSD and Radeon graphics processor).  I'm exploring the NFC of the machine features, because I have an NFC-enabled phone, but I can't seem to find where to activate the NFC on this laptop.  Frankly, I d

  • BlackBerry Pearl 8130 smartphone

    We recently purchased the Blackberry 8130 and have some problems with them. Speed Dial worked at some point, but now only brings to the top of my address book.  I removed the battery for 30 seconds, but this does not solve the problem. Volumes of rin

  • Where can I find delivered translated values for a given field?

    I looked in the App designer and searched properties of field / and can not find the values I see in the LOVs of MISTLETOE. Also, if the field does not exist in PSXLATITEM Oracle does not deliver what it means translated the values of this field?