Satellite A200 - support BT?

I have a Toshiba Satellite A200 PC.
I recently purchase a Nokia 5230.

Anyone know if

(a) the computer has internal bluetooth and if so is it compatible with my phone and
(b) a bluetooth dongle would be a better buy.

Someone had problems with one of these products?

Hello

With regard to the question

(A) there are various A200 models on the market with different hardware specifications. It is not possible to say if the BT module is installed without knowing the full model number. But you can check the bottom of the unit. If there is no label BT the BT module is not installed. The BT module offers a BT connection and it s compatible with all possible ready BT devices.

(B) if the portable computer does not support internal BT module then you can buy a dongle external BT as the easier way to prepare s BT notebook.

Welcome them

Tags: Toshiba

Similar Questions

  • Is Satellite A200 supports 4 GB 800 Mhz RAM

    Hello
    I have the Satellite A200 - 1 m 7 with only 1 GB of ram and I think to upgrade to 4 GB of ram.

    My question is:
    It is supported at 4 GB of ram, or it won't work?

    And it is supported for ddr2 800 mhz memory speed?

    Thank you

    Hello

    It depends on the bus front end (FSB) If your FSB supports 800 Mhz then you can use these modules and the modules would run at full speed.

    According to this page, the laptop can be upgraded to 4 GB.
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=32477&ft=m&St=3

    But note; 32-bit Windows will not be able to use the full 4 GB of ram due to the limitation of 32-bit.

    Best regards

  • Satellite A200 - support Button does not start when windows starts

    Hey,.

    Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
    However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

    However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
    I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

    Edit: I found a solution, even if not the best. If anyone still has the same problem:
    I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

    Hello!

    I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

    Search on the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite A200 - 1 GB does support SATA 300 HARD drive?

    I want to spend my Sat A200 - 1 GB hard disk with a 7200 RPM one... but they are all SATA300 models.
    Is this speed mode supported by the bios, motherboard and sata controller of this laptop?

    I just want to be sure that the hard drive works at its maximum speed capability and the sata and the mobo will not be a bottleneck...

    If Yes, the sata controller driver whichsis?... I want this wake in my own vista installation disc.

    Hello!

    Yes, you can use a disk with SATA300 mode but it only works in normal mode SATA no more at maximum speed. The Satellite A200 supports only SATA 1.0 mode (SATA150).

    You can use a HARD drive with 7200 RPM, this isn't a problem.

    What HARD drive capacities are supported, that you can see in the user manual. Look in Chapter 1.

    The SATA driver is in the Intel Storage Manager package.

    Good bye

  • Re: Satellite A200-1ae - will it work with HDD SATA II?

    Hello

    I am a satisfied user of the laptop for a few years, but the HARD drive is used, so I would like to replace it with a new one. I thought Samsung SpinPoint 320GB 2.5 "HM321HI SATA3.0GB and I was wandering will it work with my satellite.
    Or that, HDD SATA2 interface will work (and I'm thinking about something new and low-cost eventually).

    Anyone tried this?

    Hello

    Satellite A200 supports the SATA HDD controller.
    SATA II is downwards compatible (would work with SATA I as well) you can also use the 2.5 SATA II HARD drive.

    Welcome them

  • Satellite A200 - 14 d: 533 MHZ front bus 667 mhz RAM equipped?

    Hello!

    I have the following problem! I bought the Satellite A200 - 14 d and on the packaging and in the shop was written with 1 GB DDR2 667 mhz RAM.
    When it came time for the upgrade, I put Everest and CPU - Z to find out exactly what to buy.

    I was amazed when I saw that my FSB 533 MHZ. The strangest thing is that RAM is really at 667 mhz, but what for?
    Now I think that's not quite legal. When I bought this laptop, I thought that it is with 667 mhz and I never doubted because it is written on the box that this computer is with 667 mhz ram!

    Please give me some advice what do I do?
    Advanced thanks!

    > was amazed when I saw that my FSB 533 MHZ. The strangest thing is that RAM is really up to 667 MHz, but what for?

    Why is it strange to you.
    This is nothing unusual. Is that you can also use 667 MHz modules! But they will run at 533 MHz due to the speed of the FSB. As I see it s clear to you.
    Always it is that there are several A200 series and some of the Satellite A200 supports FSB 667 Mhz.
    But it seems that all mobile A200 were equipped with RAM 667 MHz modules and they are certainly better than 533 Mhz modules.

    Best regards

  • Satellite A200-1AI - Windows has detected the hard drive error

    Hi guys.

    I think its time I replaced my hard drive. Ive done all the checks and his return there is no errors with the hard disk, yet whenever I connect I get a message saying that there is.

    I guess that's only a matter of time before things get more serious.
    Its just now that it unattached restarts automatically.
    Ive gave my laptop below specifications and the specifications of the hard disk drive.
    I do not know which drive hard im supposed to be looking at.

    I don't want to buy one and then duty send because its incompatiable.
    Ive done some reading on the internet and he says I cn buy any production, but I need to know wheather its an IDE or SATA, what are these and what do mean? How can I find out what my current car?

    Also should I look for a hard drive with the same speed? It doesn't matter if its fatser?
    Wise, capacity is also ok for larger, will my laptop be able to handle it. Thanks for help

    MODEL NAME: Toshiba Satellite A200-1AI
    MODEL NO.: PSAECE-00U00JEN

    HDD SPEC:

    TOSHIBA MK2035GSS HARD DRIVE
    CAPACITY: 200 GB
    CERTIFICATION: S.M.A.R.T
    DrRIVE ROTATION: 4200 RPM

    Hello

    The Satellite A200 supports the SATA HDD controller.
    That's why you need to buy a SATA 2.5 HARD.
    The value of the rmp is not really important for compatibility issues with the 4200 RPM HDD or more is possible and compatible.

    SATA controller not limited to any size of HARD drive, you can also use large drives.

  • External USB HDD cable does not match of Satellite A200 USB ports

    I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
    The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

    Can I get an adapter, or try to find a rope?
    HARD drive uses USB 1.1, 2.0 or Firewire port.

    Thank you!

    What?

    Sorry, but I don't believe that.
    The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

    Are you sure you are using the right cable to 100%?

    It should looks like this:

    [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

    and these are typical USB ports:

    [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]

  • Satellite A200 - HARD drive replacement

    Hello

    I have a Toshiba Satellite A200 1IZ and I want to replace my drive hard because I have some bad sectors.

    I don't know if my motherboard supports SATA and which version, if I order a 7200 RPM, maximum capacity.

    All advice?

    Thank you

    Hello

    As far as I know the Satellite A200 supports SATA 2.5 HDD.

    SATA controller having no physical limit, use of all 2.5 SATA hard drives should be possible.

    So in my opinion, you should be able to use a 500 GB 2.5 HDD without any problem of compatibility

    PS: Uusally it s any HARD drive manufacturer, it is, but of course, there are different HARD drive manufacturers that provide different standards of HARD drive and an unnamed 2.5 HDD would be cheaper than a HDD from brand

  • Is there a keypad on Satellite A200 - 1 M 8 PSAE6E

    Y at - it NumPad to Toshiba Satellite A200 - 1 M 8 (PSAE6E)?
    If it is, then how can I use it?

    I was looking for this in google, but I can't (I need to write the alt codes, but not Windows sybmols/characters edge of tool)

    Thanks in advance!

    Greetings-

    Andrzej Wysokinski =)

    No, the Satellite A200 supports a common keyboard with buttons 86 (US) / 87 (UK).

    But you can activate the FN + F11 and you can then also use the keys J, K, L, U, I, and O and the number keys.

    Big names

  • How much RAM can I add to Satellite A200 PSAE6? (it was 1 GB)

    Appreciate the good advice from experienced people.

    Post edited by: edw

    Hello!

    The Satellite A200 supports up to 4 GB.
    Type: DDR II 533/667 MHz SO-DIMM

    Good bye

  • Satellite A200 motherboard k00015480: what caught cpu supported

    My Satellite A200 motherboard broke down and I tried a repair...
    I got a motherboard (k00015480) equipped with Jack mPGA479 and Intel chipset 945GM/pm.

    I can't know which CPU installed!
    I tried Intel CPU: T5500 T2300 T2400 T1300 Mobile 440, seems to work but the screen remains black...
    All processors work!

    Anyone knows what CPU to be mounted on this motherboard?

    Thank you

    Hello

    Usually, you can use the processors that are supported by the chipset.
    Found this page useful to Intel:
    http://Ark.Intel.com/

    And here you can find details on the chip set:
    Intel® 945GM Express Chipset Mobile
    http://Ark.Intel.com/products/chipsets/22816
    http://www.Intel.com/assets/PDF/datasheet/309219.PDF

    The supported processors are:
    -Processor Intel® Core 2 Duo, Intel® Core 2 Duo mobile BT (low voltage) processor, mobile Intel® Core 2 Duo ULV (Ultra Low Voltage) processor
    -Processor Intel Core Duo, Intel® Core Duo processor LV (low voltage),
    -Processor Intel® Core Duo ULV (Ultra Low Voltage)
    -Intel® Core Solo ULV processor
    -Intel® Celeron® M processor (processor Intel Core based), Celeron M ULV processor
    -Front support 533 MHz and 667 MHz bus (FSB)

  • Is Satellite A200 - 1 GB (PSAE6E) supports 4 GB of RAM

    I have a toshiba Satellite A200 - 1 GB and I want to put 4 GB of RAM on it.
    It came with 2 GB of RAM pc2-5300.

    Is it supports RAM pc2-6400 memory modules?

    Concerning

    I agree with tony;
    Each 32 bit OS, no matter if it s Vista or XP will manage 3.2 GB RAM max.
    This occurs due to the limitation of the 32 bit OS.

    So perhaps it would be better to update the laptop up to 3 GB (1 x 1 GB + 1 x 2 GB)

    You must also use the DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

  • Satellite A200 - 2BH PSAE6E: cannot install utility support Flash Cards - serial number is invalid

    Hello

    first sorry for my bad English.

    Secondly, I have a Toshiba Satellite A200 - 2BH PSAE6E I changeg my Vista OS and I have a problem with "utility of Support Flash Cards. I can't install it.
    I have this error message "serial number is not valid" I don't know what to do.

    Thanks for your help

    Hello

    Error: the serial number is not valid, says that you have tried to install a tool that is not designed for this series of portable.
    Are you sure you have the right tool for the right laptop model?

    It could also be another reason for this problem that you tried to install the tool in the wrong order.
    Usually this also controls the FN keys and it requires installation of VAP first.

    Install VAP (value added package) and try again

  • Satellite A200 PSAE3C - Flashcards support utility problem

    Hello
    I use the psae3c-ft108c Toshiba Satellite A200 model I purchased in the Canada. I m problem with Toshiba flash cards support utility.

    I formatted my laptop (vista home premium) and installed vista Ultimate edition a few days ago. I installed all the drivers, I had no problem until I installed comodo firewall pro (I don't know this comodo firewall causing the problem until I did research on the internet).
    After installing comodo firewall the FN key does not work and started to crash and he showed me a blue screen. I have restarted my laptop and tried the FN key, but it shows the blue screen still :(

    So I uninstalled the extra package of flash support utility and value cards and I tried to reinstall the flash cards support utility, but he continues to shows me the message that says "the product [2] is already installed, preventing the installation of this product. The two products are incompatible"value-added packaged installs well but since flash cards support utility will not be installed, I can't use the FN keys with keyboards... (I can use flash with mouse however cards)

    I uninstalled comodo firewall and tried to install the flash utility maps, but it does not work either...

    I don't know what to do... Please help me

    p.s
    Sorry for my messy :(writing I m an international student.

    I always use the freeware CCLeaner. It cleans the keys to registry and file systems, etc.
    I always use it after that a piece of software has been removed from the system.

    So you should this; After PPV was removed, allows to run the CCLeaner and before you install the new VAP to restart the laptop!

Maybe you are looking for