Satellite A200 works fine on battery but hangs when adding power supply.

Similar Questions

• Satellite A200 - 1 M 8 - battery loose quickly

  Hello

  Please I need help... I have a Toshiba Satellite A200 - 1 m 8.
  Operating system: Windows XP Pro SP3.

  I noticed that the wireless connection, working the laptop on battery, drops and sometimes connects but connect to normal power supply it is easy

  I have looked for similar issues and found that Intel for wireless devices does this to save battery. I followed the instructions I found and Wi - Fi worked well by increasing the management of feeding in device settings Wi - Fi, but the main problem is when I increase the power, the laptop computer on batteries, the computer apparently management to lose battery power quickly.

  Should I change the defective part by the manufacturer or what to do...?

  Thank you.

  Hello

  As you know the power consumption is based on the use of the laptop and also the power settings. I put t know what exactly do you do when your laptop works with battery power, but it will be interesting to know how long you can only use it to batteries.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• My HTML code works fine in IE8 but 'jump' slightly to the right and left pages in Firefox

  I created a Web site that looks and works fine in IE8 but in Firefox some pages break a couple of pixels to the left. I tried to debug it but cannot find coding errors.

  You can force a vertical scroll bar with body {overflow-y: scroll}

• Toshiba Satellite A665D-S5175... wireless works fine on AC, but not on battery

  Satellite A665D-S5175... I loaded windows 8 preview... I was really in LOVE... Afterwards, I had to reformat back to the original "out of the box" due to windows 8 not to recognize seagate hard drive (even if the compatibility check does not list)... Since then my wireless internet works fine when on the current but will not work on battery... my battery works fine and wireless works fine on all my other wireless devices... can't help but to think it's some type option to power supply but I can't find it to save my life... Help! Toshiba wants to much $$ to ask me this? their staff... I don't HAVE a big $$$ LOL! Thanks to anyone who can shed some light on this...

  Hello

  Change the power setting on default battery for the wireless network adapter. Configure the wireless network adapter to use the maximum performance setting when Windows Vista or Windows 7 is configured to use the balanced power plan or the power saver Power plan. To do this, follow these steps:
  1. click on start
  2 type Power Options in the start search box, and then click Power Options in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. click on change settings for the plan under the management of the diet that is selected. For example, if the balance is selected, click on change settings under balanced plan.
  4. click on change advanced power settings.
  5. in the Power Options dialog box, expand wireless adapter settings, and then power saving Mode.
  6. in the list that appears next to a pile, click performance, and then click OK.
  For more information, see the link.
  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point
  http://support.Microsoft.com/kb/928152

• LR CC works fine on my laptop but hangs when I connect a new external monitor

  LR CC big short on my laptop with or without the option enable the GPU.

  Last week, I bought an ASUS 24 "PA248Q monitor.  When I connect the external monitor and get all the settings to extend the screen everything works fine EXCEPT Lightroom.  When I run LR, I see the splash screen and the screen on the new monitor then turn a solid color (it seems that any color except the classic blue screen of death).  At this point, my laptop is completely locked.  No pointer, Ctrl-alt-delete.  I have to power down.

  In the investigation of this issue, since took me to update to the latest Nvidia driver, is ensure that the driver has been installed and uninstalled and reinstalled LR CC.  I calibrate using screen ColorMunki and tried with and without the calibration of loading software on startup.  When I unplug the external monitor and restart, LR works normally on the laptop.  It just craps out when the external monitor is connected.  PS CC works fine on my new monitor.

  Help, please.  I'm out of ideas.  I have a ticket open to ASUS, but so far their dose was to reset the screen and it does not solve the problem of crash.

  Thank you

  Craig

  Here is my info from LR:

  Version of Lightroom: CC 2015.0.1 [1018573]

  License: Creative Cloud

  Operating system: Windows 7 Edition Home Premium

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.1 GHz

  Built-in memory: 8086,1 MB

  Real memory for Lightroom: 8086,1 MB

  Real memory used by Lightroom: 612,6 MB (7.5%)

  Virtual memory used by Lightroom: 578,5 MB

  Memory cache size: 60.7 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1366 x 768

  Entry types: Multitouch: no, built-in touch: no, built-in pen: Yes, touch external: no, external pen: Yes, keyboard: No.

  Graphic processor News:

  Check the supported OpenGL: failed

  Seller:

  Version:

  Rendering engine:

  LanguageVersion:

  GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS (size = 16, minimum = 48)

  GL_MAX_COMBINED_UNIFORM_BLOCKS (real = 24, minimum = 36)

  GL_MAX_FRAGMENT_INPUT_COMPONENTS (size = 8, minimum = 128)

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Craig Mullenbach\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Craig Mullenbach\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) HDR Efex Pro 2

  (6) home Plugin Leica

  (7) attachment Plugin Nikon

  Config.LUA flags: None

  Update Kit: Adobe Camera Raw to Lightroom 6.0 9.0 (build 1014445)

  Update Toolkit: book Module 6.0 (build 1014445)

  Update Kit: develop Module 6.0 (build 1014445)

  Toolbox update: Import Module 6.0 (build 1014445)

  Updated Toolkit: library Module 6.0 (build 1014445)

  Update Kit: Card Module 6.0 (build 1014445)

  Update Toolkit: monitor Module 6.0 (build 1014445)

  Update Toolkit: print Module 6.0 (build 1014445)

  Update Toolkit: Slideshow Module 6.0 (build 1014445)

  Toolbox update: Module Web 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgNetClient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.AgWFBridge 6.0 (build 1014445)

  Update Kit: com.adobe.ag.Headlights 6.0 (build 1014445)

  Update Kit: com.adobe.ag.LibraryToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.MultiMonitorToolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.archiving_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.bridgetalk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.catalogconverters 6.0 (build 1014445)

  Update Kit: com.adobe.ag.cef_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.coretech_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.curculio 6.0 (build 1014445)

  Update Kit: com.adobe.ag.discburning 6.0 (build 1014445)

  Update Kit: com.adobe.ag.email 6.0 (build 1014445)

  Update Kit: com.adobe.ag.export 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ftpclient 6.0 (build 1014445)

  Update Kit: com.adobe.ag.help 6.0 (build 1014445)

  Update Kit: com.adobe.ag.iac 6.0 (build 1014445)

  Update Kit: com.adobe.ag.imageanalysis 6.0 (build 1014445)

  Update Kit: com.adobe.ag.layout_module_shared 6.0 (build 1014445)

  Update Kit: com.adobe.ag.pdf_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sdk 6.0 (build 1014445)

  Update Kit: com.adobe.ag.sec 6.0 (build 1014445)

  Update Kit: com.adobe.ag.socket 6.0 (build 1014445)

  Update Kit: com.adobe.ag.store_provider 6.0 (build 1014445)

  Update Kit: com.adobe.ag.substrate 6.0 (build 1014445)

  Update Kit: com.adobe.ag.ui 6.0 (build 1014445)

  Update Kit: com.adobe.ag.video_toolkit 6.0 (build 1014445)

  Update Kit: com.adobe.ag.xml 6.0 (build 1014445)

  Update Kit: com.adobe.wichitafoundation 6.0 (build 1014445)

  Map #1: Vendor: 8086

  Feature: 116

  Subsystem: 50e1028

  Review: 9

  Video memory: 64

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  Finally I found a thread on the Dell forums.  Apparently, my Dell laptop can not display things complicated on the external monitor. Dell XPS L502X hangs when it is connected to the external monitor - general hardware - laptop - Dell Community

• Satellite A200-09V - card Wifi detected but never connected

  Hi all!

  First of all, sorry for my English... so be cool with me!

  I have a Toshiba Satellite A200-09V so I change my router to a DLink with 802.11n. So I buy an internal wireless card but the card is correctly detected, but never whant to be 'connected '.

  The original card inside is an Intel 3945ABG.
  When I turn on my laptop, on the front of my laptop, I have a little orange light with a switch to cut the card.

  The card I buy is an Intel WiFi Link 5100 ABGN. But light, wathever I change the switch ON of OFF, again and always off the coast. Windows detects the card correctly and I install the right driver for intel, and in my equipment manager, the card is in the network card.

  But the map never want to get "online"... I can turn the card but I can not connect (so I do not see the wireless near me).

  I have the latest bios and driver... but it's like the laptop never 'talk' to the card and by the way, don't get pass the signal.

  But why XP detects the card but not get cards online? If the card was bundles, XP will never be able to "detect" the card and if XP correctly detects the card, it's as if the card is compatible with the motherboard? Isn't it?

  Thank you for helping be and I give you all the information you want...

  The network without WIRE Intel 3945ABG card only does support A, B or G standard and your router has N.

  So, you need to set the router to G standard or perhaps, you set up the router again to this standard and without security settings. It's the best way I think, and if it works, you can enable encryption and the security features more.

• After that Exchange MOBO get Satellite A200 works correctly

  HI guys,.

  I have a Satellite A200 here, my friend took instead of pc, and they told him it t could not be fixed and needed a new motherboard... Well, I've managed to fix it and connect it to the internet (I've fixed a few PC) anyway I did all updates, then it took forever to stop.

  Now, he won t load it just says: everything that s of loading. Or I get a black screen and now it doesn't want to load... I can t get into doing a restore or do a hard test drive. do you suggest anything?

  I downloaded the other night n they don t seem to work no more than recovery disks. B4 I got it work somehow, I'm in and did a software recovery or factory default, then it worked, but I t me remember how I arrived I there lol... any information will be helpful... and I thank you in advance

  It s running windows vista

  As far as I know recovery disk can not be downloaded so I t understand what you did exactly.
  Anyway if material s notebook is OK you can install OS using original recovery DVD disc or install the OS by using the original installation disc for Microsoft.
  If you have the original recovery DVD (ask your friend if he or she has a) use it for installing the OS.

  If you are using Microsoft disk all the necessary drivers, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  If you have more specific questions, you are welcome.

• Satellite A10 works on AC adapter but the lights are on?

  Hi, everything was fine... until I put the champions league final on! My phone was on and fine, I then put an installation disc (AXIS AND allies)-it to half way through and it stopped - no power left in the battery!

  Well it would have been ok, but it was connected to the sector! The adapter green light was on and the amber light. I checked the adapter - it was fine - not bad etc, then the battery. I tried to turn it on with just the Commander dashboard and without battery, but that didn't work.

  All that is happening today is lights indicate the ca is to and active, but after a few minutes, when the power of the battery falls down the captain goes out when battery don't--and just then turn it back on but the laptop is off!

  I wonder if it's the battery or maybe the program powersave? Anyway I need help as soon as possible because he has children GCSE work on it :(

  whereas the cheapest place to get a PA3284U-1BRS battery!
  Thank you

  I tried
  > to turn on with just the Commander dashboard and without battery, but that
  > did not work.
  >

  Hi Paul

  Please be careful with this case. It is possible that there is a problem of electronic power supply. In my opinion, it should be checked. In my opinion, you must contact ASP in your country and explain to them the situation.

  The addresses that you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Please let us know what the problem was!

• Pop-up windows are working fine in IE but not in FireFox

  I'm sorry if some of you useful people are tired to see my questions, but...

  I have a page with thumbnails (which float right through altruistic Grandpa) and by clicking on each thumbnail opens a new window with a larger photo and text version. It works fine under IE - the window opens and closes as it should - but in FireFox, it creates a second browser window which must be closed manually in order to return to the index page.

  Any suggestions?

  http://acemon.com/features.html

  -Ace-

  Where you have this in your code:

  target = "_new">

  Remove the target = "_new".  You don't need this here because the popup script opens a new window.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I have the most recent edition of the Flash Player and it works fine with IE, but Firefox always tells me that I can play things because I have

  Since I updated Firefox I can't play anything that requires Flash player. I have the reader up-to-date and it works perfectly with IE, but Firefox always tells me that I need another plugin and when I followed the instructions, it says "failed download try manual download" but even that fails too.
  Before I updated Firefox I had no problem, can you help me
  Alan.

  al55:

  Using Windows 7 64-bit or 32 - bit OS?

  • How to determine for Windows 7 and Vista: http://support.microsoft.com/kb/827218#WinVista7

  Firefox is a 32-bit application. Try to (1) download the 32-bit Setup program, save it to your hard drive, (2) close all browsers, (3) run the program installation and (4) test.

  • 32-bit direct link manual installer at Adobe: download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe

  After installation

  • use Firefox to access this link to test: https://www.adobe.com/software/flash/about/
  • then use IE to go to the same link to test

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Tween alpha works fine in preview, but not in the swf file

  I was wondering if anyone could offer some suggestions. I have a few words written in text mode static I made a graphic symbol. On the timeline, I used the motion tween and classic Tween to create change aplha from 0% to 100%.  I made sure that I have enoough to space on my calendar (10 images).

  Aplha interpolation works fine in preview, however when I export the swf file the aplha interpolation doesn't work anymore? I tried to break the text, flash of reboot, restart my computer and similar proposals for other items such as:

  I was able to fix this by checking the box 'use bitmap caching DURATION' in Blend in the properties panel for the MovieClip in question.

  I am currently using Flash CS5 on an imac. Would be grateful for any suggestions, that I do not understand how something that worked very well, has suddenly stopped working? Bug?

  Thanks in advance

  Stace

  Create a new fla and duplicate your efforts with your tween alpha of your text.  any problem?

• My site works fine in firefox but doesn't show the background color of my pages in that is to say, any help greatly appreciated.

  My site is http://www.bigmoggs.prohost4u.co.UK the site appears fine in FF but then open in IE none of the text, buttons or flash animation, the only thing that appears is a blank page in the correct color, can someone me please help

  On line 60, opening style tag is not complete:

• Satellite A200 - STARTING problems, freezes on the connection of the power adapter

  My 3 YO A200 (PSAF3A-08202D has developed a problem with starting.
  I can start on battery power with WINDOWS VISTA BUSINESS (after 10 attempts, but freezes immediately when the power adapter is plugged in.)
  Display sometimes boots wide-screen, but mostly freezes before windows welcome.

  When running, the battery produces about 1 to 2 hours before a complete evacuation.
  When executing a battery, computer freezes when I plug Charger AC/DC immediately and going with my A100 charger as an alternative.

  Initial problem was a faulty hard drive and super hot air flow due to fluff the cooling block fan.
  Tech replaced original 120G HDD with 500 G and reloaded at the factory. works well for 3 months, then started with the same problems so conclude original disk HARD was just a secondary issue.

  So maybe fixed I overheated components on the motherboard. Reset of data cards initially fixed a problem starting but is gradually degraded.

  Reading through the forums seems that there is a huge amount of these laptops with similar issues. Is this a design flaw, like my other Satellite A100 is solid as a rock. All forums, which suggests resetting the cpu is running slow or be disconnected seem to be temporary repairs. Boot in safe mode and reset the default settings have no effect.

  A suggestion that a capacitor is at fault seems to be the fix is valid but which involves specialized tools is not available locally. Local agent of Harvey Norman for Toshiba are best part of unnecessary because they can send in Australia from Toshiba. Machine has been close to $2000 and is now worth Zip.

  I am unable to do anything with this machine, as all the ways of upgrading or resetting calls for AC power available and running.

  I'm about to do radical things and hope that this forum can enlighten us.

  Hi Mickaël

  You might be right. It seems that the motherboard is affected.
  Don't know why but higher temperature can still affect the internal parts.
  The temperature may increase if cooling fans n t working correctly. For example dust or debris leads to a higher temperature because cooling air cannot circulate properly.

  I have to clean my laptop's cooling grilles from time to time using a jet of compressed air. This allows to keep the temperature at the lower level.
  Of course the internal temperature is not always a reason for portable computers hardware malfunction equipment can begin to malfunction as always in an other products too: TVs, cars, game consoles

  I bought an extended warranty for my laptop, also for my LCD TV mercy always if a high-end product begin to malfunction and in the case of a warranty claim, the fault can be fixed free of charge.

• Touchpad on Satellite A200-1 body weight does not light when you tapoterez the top right

  Satellite A200-1 body weight.

  This has a double Synaptics touchpad mode that switches modes when you press on the upper right corner - at least he used to. Upgraded to Win7 and had to do a clean install as I had Vista Ultimate 32 bit version.
  Used the upgrade of Tosh package but the touchpad driver gave me the basic features, no double mode.

  Looked around and installed the driver of Luxpad V6.5 9.1.14 dated November 2, 2007. Played a little and everything came out to be almost normal, but the pad does not turn on & change the mode when I press on the upper right corner despite the checkbox for this being checked. It does turn on and work if I check the second option on the external mouse, etc..

  All ideas will be considered with gratitude that I tend not to use it. See you soon.

  Hi ple2011,

  Where did you downloaded Luxpad V6.5 driver? I can t find it on the Web from Toshiba site

  Is that on the Web from Toshiba site, you can download Alps Electric and Synaptics touchpad driver and you must install two drivers. You can download them here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!