Touchpad on Satellite A200-1 body weight does not light when you tapoterez the top right

Similar Questions

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(

• Tecra A4 does not light when you press the power button

  When I press the power on button it turns green for 4/5 seconds then turns off.
  "I do all the tests the support on the page:
  
  * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

  * Connect the adapter to the computer.

  * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

  * Plug the power adapter into a different plug.

  * The battery, ensure that there are enough energy to start the computer.

  * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

  * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

  * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

  * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
  In vain:]

  You know? THX

  Hello

  There must be a hardware malfunction.
  You have tested a lot and nothing has worked
  I think there is not much to do, you all tired and I guess the authorized service provider could help you

  If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• Satellite A100 - line number on the keyboard does not work when you enter the password

  I have an A100 / Pro A100 series satellite laptop, what ever that means.
  Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
  It appears to the integer line, including BACKSPACE don't work.

  I can use the mouse to select and remove, but that leaves a mark of character in the password box.
  Other buttons work except the row number.

  If I need to connect an external keyboard to verify where I connect (if I can)?
  Any help would be great.

  Can I change the keyboard?

  Hello

  trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
  Details how to change keyboard, you can find here

  irisvista.com

  Welcome them

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• White sceen does not respond when you open the browser

  After trying a patch of browser, the stock browser now opens to a blank screen with no current option.  In a previous post I detailed my problem with WebOSDoctor (I've got a whiote, 64 GB touchpad), so I'm wondering if maybe someone can help with the browser issue itself?

  I tried to uninstall all the patches from the browser and even tried to restore using text editing to the original text of the BrowserAJ.com with no luck.

  Help?

  Thanks - Matt

  Please see the response of Terabyte you in the other thread.

  WyreNut

• Narrative does not work when you create the Windows Movie Maker project

  The narration does not work

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  ======================================
  I was wondering... work your tape recorder of Windows?

  Windows Vista - sound recording
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  The following article might be worth a visit:

  How to: Add narration to a movie using Windows Movie Maker in Windows Vista. :-add-a-narration-to-a-movie-using-windows-movie-maker-in-windows-vista https://ask.qut.edu.au/app/answers/detail/a_id/4499/~/how-to.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Audio does not play when you press the arrow keys.

  Hello

  When I'm working on a project and I press the left or right side of the keyboard arrow keys to move a picture in the timeline, the audio does not play.

  He used to play and also appear in the audiometer as a level, but recently he has ceased to be. Maybe it was because of an update?

  Is it possible to turn it back on? Maybe I hit a button by accident and disabled the function.

  If it is due to an update, is there a way to revert to a previous version?

  Looking forward to you soon.

  Thank you for your time and help in advance.

  All the best

  George

  Mac OS X El Capitan 10.11.1

  iMac 27 inches, end of 2013

  Processor Intel Core i7 3.5GHz

  16GB 1600 MHz DDR3 memory

  NVIDIA GeForce GTX 780M 4096MB graphics

  First Pro CC 2015.1

  9.1.0 (version 174)

  Please let me know if you need more information and I will be happy to provide it.

  Try pressing SHIFT + S, which is the shortcut for "toggle Audio while Scrubbing."

• LOV cascading does not work when you set the value of the parent LOV with DA

  Hi all

  Using APEX 4.2.2.

  I have tow LOVs

  LOV parent article is: P50_TYPE

  Child element LOV is: P50_PROJECT_ID

  In other words in the attributes of the element P50_PROJECT_ID, we have:

  > Cascade LOV Parent article (s): P50_TYPE

  > The items to show page: P50_TYPE

  > The list of values definition: something similar to:

  Select * from mytable where type =: P50_TYPE

  I use DA as run of the JS code to set the value of the P50_TYPE element

  something similar to:

  > $('#P50_TYPE').val (2);

  After doing this, the P50_PROJECT_ID element does not get updated when the P50_TYPE value changes. Namely, P50_PROJECT_ID remains empty, unless the end user manually changes the value of P50_TYPE.

  Any help please?

  Kind regards

  I had a similar experience, he expected a change event, so you can extend the jQuery to be included

  $('#P50_TYPE').val (2) .changes ();