Satellite A210-19 t: screen goes black sometimes

Similar Questions

• Satellite 3000 - X 4: screen goes black after start

  Hello

  I have a laptop of s3000 - x 4 satellite.

  swiched top upward start then the screen goes black, I can just do the display to see loading, windows
  This happens even if I can get it to boot in safe mode, or when I enter setup.
  If I'm lucky, I have a minute of commissioning until the display changes. and as soon as I restart, I'm square.

  can anyone help? If it is a component, it is easy to find and replace?
  see you soon

  Colin

  Hello

  Have you tried to connect the external display?
  If this is not the case, try it. Also check out the switching between display devices with the FN + F5 key combination
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD supplied. Also try to improve the shape of the Tosh site graphics driver.

  But if it won't work and you can't see anything on the screen so I guess there must be something wrong with the hardware. In this case only the ASP in your country is able to help you.

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Tecra 8100 - screen goes black sometimes

  Hi members,
  I recently got a Tecra 8100 for cheap on eBay.

  The screen sometimes goes black its still on I need to press the shaft close to the screen and it beeps sound sounds and back on.

  I removed the frame of the screen and it made the difference for a about a week but just happen again:(mais je croise les doigts pas très souvent.)

  I read on google etc. it can be sumtin with led, etc. I just want to know how to replace the part?
  What part I need to replace etc.?

  I disable all power management things, and sometimes even of it is would no doubt something with the screen.

  I need ideas how to resolve this because it's a good laptop for a student lol prity.
  Thanks for reading and any rear power

  Hello

  Sorry, but it's really not easy to say what needs to be replaced.
  But it s certainly a hardware problem I put t know what should I PIN you meant exactly, but maybe a loose connection is causing this problem I mean a FL-inverter connection

  Here's a useful page [how remove and replace card ups FL on Toshiba Tecra 8100 | http://www.irisvista.com/tech/laptops/Toshiba-Tecra-8100/remove-replace-fl-inverter-board.htm]

  Maybe it could be useful for you

  In any case, these hardware issues are always delicate, and in most cases, each unique piece, and the connection must be checked. It's not easy, and in most cases and the computer laptop technician should take a look on this laptop

• Satellite P100 - the screen goes black

  Hello

  I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.

  The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.

  Any help would be greatly appreciated.

  Model: Toshiba Satellite P100-PSPA6A-02NO21
  Processor: Intel Core 2 Duo T7200@2GHz
  GPU: Nvidia Quadro nvs 510 m
  Chipset: Intel i945PM
  HARD drive: Fujitsu 148GB
  RAM 2 GB
  Windows 7 Ultimate SP1 operating system

  Hey,.

  > ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
  This means that the graphics card is defective

  Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.

  If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?

• my screen goes black.

  my screen goes black, sometimes not for days sometimes after 15 min. What is happening and how can I

  Hello Egglady,

  Thanks for posting in the Microsoft Answers forum! Your question is still there while inSafe Mode? If so, you try to run a SFC scan for troubleshooting the corrupted system files on your PC.

  To perform a scan of the SFC, follow the steps on the following link: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  Your computer may also be infected and needs to be cleaned in order to work properly. I suggest that you try the steps listed in the related post below with your question:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/f26f7291-d646-4870-864e-a31976df0011

  You can also try a clean boot troubleshooting method to see if it helps you solve your problem.

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite A210 - screen goes black without any reason!

  I got my satellite A210-171 for a few years and a few months ago, everything was OK.
  But our when I'm working or watching a web my screen goes black and nothing seems to work?
  The only way around this is to turn off the power switch on the laptop then restart it again.

  I then get a message saying roughly...
  Computer has not closed properly OR sound closed to protect all data, then a countdown begins to re open!

  It may be OK for a few hours or maybe a day there is no limit of time on it!
  If anyone can help I would be very grateful, but please don't use of computer jargon that I don't understand

  Thank you

  Hello

  It is really hard to tell what is causing this problem. It could be a hardware malfunction or a software problem.
  But as Auma says you should test the RAM with Memtest86. It's really very easy to use and can detect modules memory defective RAM check it!

  Another question is have you installed a different display driver or updated? I ask this question because the display drivers they are not causing Toshiba sometimes of questions.
  In any case, I would recommend updated display driver and check the site Web of Toshiba for a update.

  And before moving on to an authorized service provider reinstall you Windows using the Toshiba recovery disc. So you will get back factory settings and with these settings, your laptop should work fine.

  Good bye

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• Satellite U920T - the screen goes black when you drag the keyboard

  This morning, I turned on my U920T-10 days but the screen remained black.

  At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

  How can this problem be solved?

  Hello

  For me, it looks like a bad connection somewhere between the screen and the motherboard.
  This could be possible reason for failure to display while sliding in and out.

  I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

  I hope that this can be corrected. I keep fingers crossed.

• Re: Satellite L350 - screen goes black when I try to play

  I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.

  My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.

  Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...

  Any help would be appreciated

  Hello

  Which disc you used to reinstall Windows?

  Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.

  In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.

• When waching a video on my Satallite L670 screen goes black

  When I wanne wach a video my spit laptop I have a satellite L670 - 1 FT.

  I'll explain what's going on:

  Firstly my mouse moves and then my screen goes black.
  and then I have to restart my laptop.

  my laptop is back to society and I came back.
  but I still have the problem means I need help!

  I can't wach any video!

  I use windows 7 64-bit.
  Internet explorer 9 64-bit.
  DirectX 11 video card.

  I wanted a video on another site and look it asked if I wanted to download adobe flash player.
  I had actually just mine I thought he was old so I download and now I can not see more videos.

  Sorry for my bad English :(

  and I reinstald adobe flash player.
  first I remove and then I installed it.

  The description of your problem is not over.
  What operating system do you use?
  Are you using the original Toshiba recovery image (preinstalled Win7)?
  Since when you noticed this problem?

  What videos do you mean exactly?

  What did you do about this?

  What is with YouTube? Can you start normal mode or there is problem when you click the view full screen?

• Screen goes black whenever I move my Equium A200

  Hello

  I have a Toshiba Satellite A200, my screen goes black whenever I move the laptop, I do the screen before the screen lights up again! No idea why this happens?

  Thank you very much.

  Charlene.

  It is not easy to say with certainty why this happens, but I guess that there must be a contact between display and motherboard problem.

• iMac screen goes black

  Hi all!

  My iMac screen is absolutely randomly fade to black (sometimes with the seeds), but the system continues to work very well. It happens even in recovery mode (command-R to chimes sound), but worse than usual. After about 10 to 20 seconds in the mode screens recovery becomes black.

  Is - this problem is software or hardware?

  P.S. screen goes black when Windows is running under Bootcamp so.

  iMac 21'5 late 2013, GPU Intel Iris Pro, OS X 10.11.3 (problem with 10.11.2)

  Impossible to say with certainty, however please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.