Satellite A30 hibernation and activation problems

Similar Questions

• Satellite A30 - where and how to order the recovery disk

  Hello

  I have a Satellite A30 range and I'm about to install a new hard drive but I don't have the original recovery disk. I told myself I can are no longer met this Toshiba directly so I wonder if someone can direct me looking for a replacement of original or copy.

  I Googled it but it is difficult to sift through to find the exact one I'm looking for.

  Thank you

  Hmm. I thought you can order the recovery CD Toshiba of the ASP in your country but if the series of laptop it is too old it would not be possible.

  However, you can also install the Windows operating system by using the Microsoft CD and then you could install the driver of Toshiba of the Toshiba driver page.
  XP driver should be placed in the box ARCHVE.

  * Archive *-> Satellite-> Satellite one-> Satellite A30-> Win XP

  welcome them

• Satellite A30 Eve and cursor jump

  My Satellite A30 suddenly stopped allowing me to 'move or scroll' smooth - all jumps and vibrates when I try to drag.

  Is - my A30 collapse?
  It suddenly stopped allowing me to 'stand by '.
  It is set to 'stand by', then closing the lid-, but it remains lit.
  by clicking on 'Start' and closing - restart and stop buttons are lit and usable - but the position of the button is grayed out and unusable.

  any ideas? hope so.
  Carl

  I have just read another section on the recovery of the laptop.
  Please post if the new facility helped solve this problem!

  Thanks and greetings

• Satellite A30 heats and turns off automatically

  Hello
  I love my computer laptop satellite A30 with part number as PSA30E. Recently, it has developed a problem. the laptop GET closes after a bit of time if connect us the power supply external source.but the work of the laptop very well if the battery is fully charged. It is not warmed up quickly because it works with the external power supply. However I noticed that the machine gets very hot after a short time, then the pc stops automatically. is that someone can help me please...

  Hi stephanie,.

  This soundslike a case of overheating caused by the heat sink of the CPU obstruction with dust and lint sucked up by the cooling fans. You will find this described in the following link:
  http://www.irisvista.com/tech/laptops/ToshibaA35/satellite-A35-fixing-overheating.htm

  You will find that it is easier to use a vacuum cleaner pipe placed on the grids of air intake based on your laptop computer, since it is very effective and doesn't involve any dismantling of you A30.

  Kind regards

• Service issues cell phone iPhone, update errors and activation problems.

  So I just returned from a stay in Germany yesterday. I got home and when I got my iPhone 5 s out, my iPhone would not connect to my carrier that is EE. It shows that «in search...» ", in the upper left corner, where it should display my carrier. I have enabled updates of the carrier, but did not find anything. I also removed and re-inserted my SIM card, but when I took it out it still showed the message "Search"... ». However, I found that it was and to update the iOS, 9.3.3. Immediately I thought this would be a solution to my problem except when I tried to install this update, I had "a software update cannot be installed at this time. Try again later"message. I then deleted apps, so I had 4 GB of data in case I didn't have enough space to install it. It did not work. Then I deleted the update and re-uploaded. Still nothing. I was frustrated now then searched the Internet for fixes, but for me, those difficult sites never really work, and of course, they did not. In the end, I decided to back up my data and content and do a reset. Now I begin to set up my iPhone and get to the part where I choose a Wifi hotspot, so I chose the connection of my house which is strong and should be able to maintain a connection to the whole upward. But after I click Next, it says 'iPhone activation', but then he says: "your iPhone could not be activated because activation sever is temporarily unavailable. Try again in a few minutes. "I tried again 10 minutes later and it still does not work. All I want is a solution, because I am now left with a useless phone and I am due to go to Spain in 6 days and will not be able to ring or text anyone. Help, please!

  A difficult here. Ultimately, this looks like a problem of free Wi - Fi connection. Try restarting your router. Also coincidentally, you might have a Wi - Fi chip or the faulty antenna.

  Here's a tip for the user on the problems of Wi - Fi. Many of them does not apply in your situation but worth the drive just in case.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite Pro A100 and load problems

  Hello everyone. New Member here.

  Got a huge problem with my laptop. I have a satellite pro A100-830. Part number: PSAACE-00W002EN. About 2 years ago

  I can run on the current system. But it will not work on battery. I just bought a new battery and it shows on the computer.
  I get indications are:

  battery charge amber lit.
  Light on power
  Power meter indicates the battery charge. I connected new battery and it shows 47% and now 3 hours later its still 47%
  If I unplug the power to the computer shuts down and will not work on battery.

  the AC light seems to be slightly duller than the one next to him, if that makes sense.

  Ive tried updating the BIOS etc but I'm ideas if im honest as im not a computer pro. I searched the internet but I can't find an answer

  Huge thanks in advance

  Stand by.
  We need more explanation here.

  You have the same problem with the battery and you have bought one new in the hope that everything will be OK?
  Have you noticed the same problem with the battery?
  You bought original Toshiba battery?

  In my view BIOS update won't help you much. I think electronic power is responsible for this BIOS update ahs no influence on this.

• Satellite Pro 4270 and network problems

  I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

  But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

  In the next devices, win98 reports error handler:
  The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

  The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

  In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

  Hello

  I guess it is Win 98 Second Edition You are using on the 4270.
  Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

  While you are at it download the other drivers you need more.

  BR

  Tom

• Satellite Pro M70 and chariging problems

  Hello everyone,

  I wonder if anyone can help me with my problem, my Satellite Pro M70 sometimes does not load when I put the charger into the socket, if I out of the power supply and leave it for 2 days I have costs for a period of time up to 20 hours, and then did the same thing.

  I tried to turn it on without the battery, to check whether the problem is with him, but he turns. So this led me to believe the problem isn t the battery.

  Can anyone help?

  > have tried to turn it on without the battery, to check if the problem is with him, but it won't turn
  You mean the power of t n for laptop up connected to the sector, but without battery plugged in?

  Hmmm, to me this looks like a bit of a problem with AC adapter or an electrical problem of power offers the Board of Directors. As you probably knew that, it is really difficult to provide suggestions without touching the laptop.

  First of all, you can check if the machine uses latest BIOS. If this isn't the case, update the BIOS.
  Check if the laptop would go also without battery and only connected to the network.

  If this does not work, then the adapter should be verified.
  If the AC adapter is ok, then, the motherboard must be verified

• Satellite A30 - huge WPA2 connection problems

  Hi, I have an old A30. He got XP SP2 on it. I have a Belkin F5D7010uk slot pci wireless card, because I just upgraded my network with WPA2 security. Even if I have the latest drivers for the card and have downloaded and installed the patch windows xp microsoft 893357, the card sees my network, but don't connect properly (says there is little or no connection).

  As I said to several men polished of the India by phone, I type the right password, and all firewalls and security are disabled. I can only assume, after working on this all day, it's a matter of toshiba (as it's quite old). Is there a driver to resolve this problem, or another problem?
  I downloaded everything from microsoft that I should of.

  Thank you

  Select this option.

  Hi slarn,.

  If I understand you correctly, you have exchanged the WLAN card. Right?
  Well, sometimes here in the forum I read that other wireless network cards are not compatible. The point is that everything is not compatible with everything.

  What you can do is to install the latest drivers and update the firmware on your router. Try the DHCP and static IP addresses.

  If that doesn t work, buy a network card wireless to an authorized service provider. These cards are pre-tested

• Satellite A100 heating and fan problem

  Hello

  I will try to describe my problem in detail because I so hope that it might help!

  I have a 5 years A100-011, Nvidia 7600 Go satellite. Recently, I fixed a display problem that I used to, however, this time (two weeks ago) him comes from the computer laptop back from the workshop with this heating problem. Which is the first time! The problem is the fan.

  When I start the PC, the fan works like it ti be long, maximum for 3-4 seconds. After that the fan barely works! According to me, the air coming out but very very low! less than how it is used for years! I came back to the same place, I corrected the PC. They checked and claim his fine and work! So, I give it a shot and tried the PC.

  Unconsciously, there is problem. Because the temperature of the GPU that has the problem, idling about reaching 60 c (SpeedFan) and goes high (65-67) while surfing the net! And using this way too much for internet!

  What makes it even worst fan always at the same speed very slow! The speed can increase little when he reached 67c!

  In this way, I can not use any high performance program, because the PC becomes more heated then stop.

  Note: I tried the following:
  1-BIOS (latest version) no available fan control
  2 power settings does nothing and there is no option of cooling method
  3 - fan control software. Unfortunately, nothing has worked

  I don't really know what the problem is! Given that the fan works but not all the time and why the GPU gets hot without doing something really serious! What is a cleaning problem? If so, why the fan does not reach its maximum speed at this temperature. !

  I hope I am fine help and answer here!
  PLS help!
  Thank you

  I agree with the user Notepad Akuma is 5 years old and I think that there is a lot of dust and debris inside the cooling modules that prevent fans from running correctly.
  Air can circulate properly and therefore the temperature rises
  So what to do?

  You can use a jet of compressed air to remove dust from the fans that I'm doing this regularly and it helps to clean the fans

• Satellite L305-S5955 and starting problems

  Hello
  I have problems with my toshiba Satellite L305-S5955 to departure. When I push the Start button, sometimes it starts, sometimes not (even when it is in sleep or hibernate mode, press a button or the Start button don't work every time), and it is independent of the battery failure or AC power, I checked before. I took it to a repairman, continue and founder of failure has taken a lot of time, at the end, it works very well, but just two days. He said that the problem was in the bios. Now, I still have the same problem.
  -Bios version is 2.02. (never did an update).
  -OS: Windows Vista Home Basic.

  Can someone please help, or have the same problem to share.

  Thanks for reading.

  > When I push the Start button, sometimes it starts, sometimes not (even when it is in sleep or hibernate mode, press a button or the Start button don't work every time).
  > I took it to a repairman, continue and founder of failure has taken a lot of time, at the end, it works very well, but just two days. He said that the problem was in the bios

  I doubt s a BIOS problem, I think that it s more material related

  You can try this workaround simply:
  Unplug the adapter of the theca and remove the battery.
  Wait a while (2-3 hours) and reconnect the two parts.
  Then try to turn on the device

  If that does not help, then I guess that the question must be related to a problem on the electonic power motherboard or power that belongs to a mobo

• Satellite A105-S4014 and fingerpint problem

  Hello!

  I have Satellite A105-S4014 (PSAA8U-O2200U) with Vista Ultimate and there is a problem of fingerprint reader. When I try to register my fingerprints (UPEK) using Protector Suite 5.8.0 program hangs for a while and then displays an error message: an internal error has occurred (rpnpipe:rpnpipe: No. - svr (00000001fusserver)).

  For the fingerprint reader does not work.
  I did a little research, tried the latest drivers and soft - nothing helped.
  I also in the BIOS disabled TPM (I can't change) and I have a feeling that it is connected with my fingerprint reader problem (correct me if I'm wrong).

  I upgraded my BIOS to 6.0 before this problem. Then I found on a forum for decommissioning of the BIOS to enable the TPM. So I downgraded to 5.1. Nothing works. Also I know that some manufacturers provide a BIOS setting that hides the TPM by default module.

  Can someone help me to enable TPM in the BIOS or better give advice to get the fingerprint reader working?

  Hello

  Your ad is a little confusing, but I'll try to help you as much as I can.

  First, the Satellite A105-S4014 laptop belongs to the American TV series and was designed for the American market. Therefore all the drivers, tools or utilities must be downloaded from the page of the American pilot.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  This page provides the Toshiba Fingerprint Utility for Windows Vista and XP. You must have version * 5.6.0 Build 322 published 08/12/2006 *.

  Remove your old application and perhaps not compatible and install this new v5.6.0 one.

  Good bye

• Satellite A660 - fan and temperature problem

  Probably after that Bios Update to 2.3 increased fan is efficient and temperatures grew deadly
  So please help!

  I can't work on my laptop and the children cannot play in games (even simpler)
  regards and sorry for my English

  I imagine that this behavior is the result of the update of the BIOS.
  Can you please tell us what was the reason for the update of the BIOS? Sorry to ask this, but I always say that there is no reason to change anything, if there is not a serious problem.
  What to do now?

  In general, you can't do much, but what you can try is to contact the nearest Toshiba service provider, explain the situation and ask if there is a possibility for BIOS downgrade.
  I guess that they have access to the database of Toshiba and can get the older version of BIOS for you.

• Satellite A30 - RAM and overheating

  I have a Toshiba laptop but I'm not sure the exact model

  It says on the bottom SA30 - 203 years PSA30E - 00EU5-EN, he bought there is a little less than 2 years

  The reason for asking is that I want to improve the memory, because it is only 256 mb atm application to 224 MB!

  I have also some problems with it in this is very slow, it takes 5 minutes to start and I think it is overheating, as it regularly shuts down unless you hang the side fan a few inches on the desktop... Anyone have any ideas?

  [Edited by: admin August 24 05 18:50]

  Hello

  You will find a lot of discussions in this forum dealing with overheating and recommendations to correct the problem.

  The basic procedure is to remove the grilles of suction air of dust and debris. This can be done using a vacuum cleaner hose to vacuum debris, or by removing the CPU itself radiator and manually remove any build-up.

  Regarding the issue of the RAM, the SA30 use RAM shared for his graphics card, and this allocation will be deducted from the total RAM available in the BIOS. For a 256 MB RAM module, the proportion for the graphics card will be 32 MB that will leave 224 MB of memory for general use. It is this figure that signals the system.

  HTH

• Satellite M40-184 and noise problem

  I bought two days ago, this laptop and I already found two problems. The first is that always before the speakers seem to start working a strange noise (ICT) and it is very annoying for me. Is there a problem with the speakers.

  The second problem is that when I use the laptop for more than two hours the AC adapter also makes a very annoying noise. He is also very strong (more strong that fans or anything else). Is it normal to do what noise?

  Thank you

  Hi Manos,

  I'm not sure of the sound from your speakers, normally I wait till they're totally calm, unless a job is running that use.

  Regarding your power adapter, should make any noise at all. It can become hot for what is quite normal. I would recommend the adapter/notebook back to your provider as soon as possible.

  Kind regards