Service issues cell phone iPhone, update errors and activation problems.

Similar Questions

• Windows update errors and install failures - 800706BE

  OPS 32-bit Vista - while trying to install KB947821 - get error code 800706BE I also have norton 360 installed.  Since installing the update for internet explorer 8, with that I started to have some few issues updates, optional and important. Please advise, thank you very much!

  Comment: Probably Norton causing the problem.

  "Make sure your anti-virus is disabled and try the update again, if it still does not try to update in a clean boot environment:

  Test in a clean boot environment to see if the problem is related to other services or programs-

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Click Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  On the general tab, click Selective startup.

  Under Selective startup, clear the Load Startup items check box.

  Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  Click OK.

  When you are prompted, click restart.

  Log on to your account.

  ---------------------------------------------------

  Click on start-> all programs-> Windows Update and reinstall the update/s.

  ---------------------------------------------------

  To restore your Normal startup:

  Click Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  On the general tab, click Normal startup.

  When you are prompted, click restart. »

  TaurArian [MVP] 2005-2010 - Update Services

• The Microsoft/Windows Update errors and updates failed.

  I just had to make YET ANOTHER Destructive full restore my win Vista PC, regular and continuous errors and problems caused by who knows what and the fact that the system restore never worked once in 10 years of friggin! My PC tries to run Win' Vista (SP2) and all the new updates that are applied after SP2. I also run Norton Internet Security (fully updated). I would like to re - install Office 2007 again once more, but I'm reluctant to until I get an answer to the following problem, because whenever I have re-installed Office 2007 I get Office update errors as well. I do not yet have enough away with this recovery to even think about re - install "other apps" again. My problem is that a heck of a lot more than several updates that were 'available' over time since I bought this pc (which didn't even have SP1 on it when I bought it new), do not have more than several times. Finally, it seems that these updates failed stop appearing as 'available '. Currently failed updates are: IMPORTANT: KB974468; KB2729449; KB2742595; RECOMMENDED: Windows Live Essentails 2001. OPTIONAL: Bing Office 1.3.1. also failed (the current version is 1.3.3...).

  My concern about all these multiple failed updates is that if these updates ARE important, whereas they should, and at the very least, not failed to install the first time which must be installed with success the next time. There are at least 40 + other these updates on my pc (of all types) who failed the first time, but succeeded (according to Windows Update), the second time. After doing a search and try to install these updates above manually from the Microsoft Download Center, I got a response that these updates "are not" or "are blocked by another condition on my computer. What 'State' is probably I wonder? Makes me think anyone or whatever decide an update IS important for a particular system is wrong either (and the update is NOT important at all) and so it does not yet appear in the list of "update available", or it IS important and there is another unknown or error "NO that does NOT exist. preventing the update to be applied. I say no because maybe this unknown error also cites a number of error that is not found by the completely useless online "windows help and support!

  If an update is NOT or is no LONGER available, then why hell is he always recommended! ??? In all cases, "Windows Live Essentials 2011" settles, and looking for 'help' by selecting "get help with this error" I am taken to the "windows help and support" line (which doesn't help at all). That's because this 'aid' shows only 26 'results' and NONE of them include error numbers (800706... and two instances of 66A) city. ANY help will be VERY much appreciated (epecially on the part of MVP, who have been a great help in the past) cordially Andy Bob :) :) :) :)

  Let's start from the beginning.

  Lets first see what happened with your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  change c:\bootex.log

   
  What is this file exist with something in it?
   
  The following commands query the event logs.
   
  To start verification by using the name of the source for any version of Windows (because it varies).
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm

   
  To run chkdsk in Windows.
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm

   
  For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm

   
  Then to view the created file.
   

  Start "" "% userprofile%\desktop\DiskEvents.html"

   

  Copy and paste it here. Again run the commands again after doing the below.

  Then to test the equipment.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.
   
  SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  sfc/scannow
   
  Heat
  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
   
  For memory diagnostic results
  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   
  Double-click the entry for more details on this entry.
  
  For results of Chkdsk
   
  You can ignore this if you performed the first series of commands again.
   
  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  You say that you have had continuous problems. But if you want to jump the gun to fire a bit.

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

   

  Windows errors (smallish numbers) and COM HRESULT values (in general, but with exceptions, start with an 8 as 0 x 80040154) are defined in WinError.h, except 8007nnnn where you are looking for the error Window number it contains.

   

  As a general rule, Windows errors are less than 65 535 (0xFFFF). Errors from 0 x 80000001 are HResults Component Object Model (COM). Errors from 0 xC0000001 NTStatus results.

   

  NTStatus errors (usually, but not always to start with a C as 0xC0000022) are defined in NTStatus.h.

   

  the .h files are the best source because it includes the symbolic name of the error that can give clues such as the source of the error
  . FormatMessage does not have the symbolic name as the description.
   
  You get these files by downloading the kit of Development Platform (that's gigabytes)
  http://www.Microsoft.com/en-US/Download/details.aspx%3Fid%3D8279&SA=U&EI=w2IrULDDLsHFmAWbmIHoBg&ved=0CBwQFjAA&USG=AFQjCNHZn9-4f2NnuN9o3UWUsOF3wL7HBQ
   
  If you just want the two files I have them on my skydrive so I can reference anywhere I want.
  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 121
   

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Esentutl.exe /p c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

   
   

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help. Windows Update does not work in safe mode.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.
   
  or
   
  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]
   
   

  Determine the Version of Windows Installer

  Windows Vista comes with version 4. Version 4.5 is available for download. To determine the version,

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  msiexec

  If you have Version 4.5 try reinstalling from

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=8483

  If you have Version 4 continue with the other steps below.

  Reregister Windows install

  That you re-register Windows Installer.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  
  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll

  msiexec/reg
  

   

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

   

  Reinstall the Services registry entries

  Download MsiServer_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the MsiServer_Vista_32.reg.
   
  Reset
   
   

  Restart the Service and dependent services

   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator.
   

  SC start DCOMLaunch

  SC start RpcSs

  Start msiserver sc config = request

  SC start msiserver

   
   
  .
  --

• 1671 iphone update error message

  Trying to update my phone, but the error message that is not on the list of support 1671.

  Disable the antivirus software on your computer

• After you find the correct BITS service, I always get "Windows Update error 80246007" error

  I still get the "Error Windows Update 80246007" error after confirmation of BITS defined at the beginning

  https://support.Microsoft.com/en-us/GWT/10164 says:

  If you receive Windows Update error 80246007 x 0 or an error 0 x 80246008 when downloading of updates, you may need to restart the service (BITS) Background Intelligent Transfer Service or the Windows event log.

  The windows event log service is started?

• windows update error not ragarding problems. ox80240036

  whenever I try to update my window, it displays error no. ox80240036

  Hello

  You did changes to the computer before the show?

  Method 1:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  
  Method 2:
  Perform a clean boot and try to update windows and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  You can also try the steps in the supplied knowledge base article and check.

  You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
  http://support.Microsoft.com/kb/943144

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Update error 800b0100 code problem?

  Get the code above when you try to install the update on vista.

  Hello

  It is the Microsoft information to solve your problem.

  "Windows Update error 800b0100"

  http://Windows.Microsoft.com/is-is/Windows-Vista/Windows-Update-error-800B0100

  "Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates.

  http://support.Microsoft.com/kb/956702

  See you soon.

• Windows Update error and sign up for the Service is missing or damaged (OX800070057).

  I recently triedto windows update and an error came up saying

  Error Windows OX800070057 Udate. Also check this service is missing or damaged.

  Can someone please give advise me on how to solve this problem.

  Thank you

  Hello

  I'd like to run this fixit-

  http://support.Microsoft.com/mats/windows_update/

  In addition, I would also like to run you a SFC scan-

  1 put the Windows XP CD in the CD-ROM.

  2. click on 'Quit' if the auto-menu appears.

  3. click on 'Start', then click on 'run '.

  4. Type "SFC/scannow" (without the quotes) in the "Open" box, then click on 'OK '.

  Thank you.

• Cannot update the firmware of the Samsung Galaxy cell phone. CLR20r3 error.

  Whenever I try to update the firmware of my Samsung Galaxy mobile phone, I get this error message: CLR20r3 and the Samsung Kies again in itself, but does not work - Windows 7 Ultimate, SP1, x 64

  Whenever I try to update the firmware of my Samsung Galaxy mobile phone, I get this error message: CLR20r3 and the Samsung Kies again in itself, but does not work: I use Windows 7 Ultimate, SP - 1, 64xbit

  You might find that the Galaxy software is a 32-bit operating system.

  You are trying to load a 64-bit operating system in... and, suffering from a problem of huge error.

  Get the point?

• Pilot of the Apple Iphone update error, please help

  Hi, I recently bought an Iphone and my acer aspire 3680 laptop does not recognize it. I went through a lot of solutions to solve this problem, and I have determined that the problem was that my driver is not updated for it. When I click on "update driver" for the Iphone my laptop goes to a blue screen and restarts. I took a picture of the error with the error code screen, it's here. It is by the way that Windows XP. If you need more info ask me please.

  http://img200.imageshack.us/i/errorscreen.PNG/

  Any help would be appreciated.

  Hello Jamie92, welcome.

  The problem seems to be associated with driver. Here are the steps I will try everything first:

  1. start the computer in Windows without the trendy iPhone
  2. click on 'start '.
  3. click on "Control Panel."
  4. click on 'Add & Remove Programs '.
  5 locate Apple Mobile Device Support and uninstall
  6 find iTunes and QuickTime and uninstall both as well
  7. do not restart the computer after uninstalling
  8. click on 'start '.
  9. click on 'run '.
  10. Type "msconfig" (without the quotes) and press enter
  11. click on the "Startup" tab
  12. uncheck all entries that have the words "iTunes, Apple, Mobile Device or QuickTime" in their
  13. click on 'Apply' at the bottom right
  14. restart the computer
  15. go to the Apple website and download the latest version of iTunes, which should be 9.x
  16. Once downloaded, run the program installation and once the application is installed, restart the computer
  17. Once restarted, open iTunes, follow the installation procedure and then plug in your iPhone

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update errors and backup errors 0 x 80070424 in my folder of the pursuit of I'll be loading errors

  I have windows7 32, vista windows, IE 8, SP2 system.   Pharmacodependance1.  I have microsoft and windows updates that have been downloaded for sp1, sp2, sp3 for 64-bit and 32-bit.  Problem 2.  I also downloaded winsop8 for 64-bit.  Please tell me what I need to do. also 3 problem this error keeps popping up (0 x 80070424) backup to an internal error. This specific service does not exist as an installed service. Another point is, I'm logged as coquest too

  and it says unknown state of the connection. Problem 4 under temporary downloaded there 3 java jre and 2 other files that start with E..

  Problem 4-windows Defender there was no malicious software found and the real-time protection is disabled and it says that your pc is running normal.

  It's a complete analysis by McAfee.

  Hello

  1. When you receive this error message 0 x 80070424?

  2. what exactly are you trying?

  For the 4 problem you mentioned, if you have McAfee installed on your computer, the time protection real Windows Defender will automatically be disabled as McAfee already brings you this service.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• iPhone update 10 and 10.0.2 Email question

  I have the iPhone 6plus.  Since the download of 10 & 10.0.2 updates I've been struggling with my email.  When I go into my email it will stay open for about 5 seconds and that I'm in, it automatically close and go back to my home screen to force me to go repeatedly to complete an email.

  Hi AndreaL76,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your mail closing application when you try to use it. I check my emails throughout the day, so I can understand it as a nuisance, it can be. I am pleased to offer you a few suggestions here.

  You can follow these steps to try closing out of the Mail app and then try to re - open:

  Force a nearby application on your iPhone, iPad or iPod touch

  If you haven't already done so, I recommend also trying to restart your iPhone, as it may solve the problems you mention.

  Restart your iPhone, iPad or iPod touch

  If you're still having problems, then I recommend trying to remove the e-mail account, and then delete the Mail application. Once you remove the Mail application, you can reinstall it from the App Store and add your account. You can find the steps to remove and re-add your email address below:

  1. On your computer, connect to the site is Web of your email provider to check that all your e-mail or check if your e-mail is saved somewhere other than your iOS device.
  2. On your iOS device, tap Settings > Mail, Contacts, calendars.
  3. Press the e-mail account that you want to remove.
  4. Press to delete the account.
  5. Add your account again.

  Get help with Mail on your iPhone, iPad and iPod touch

  You can find the steps to remove the built-in apps, including remittances and reinstall here:

  Delete the apps Apple integrated from the home screen on your device iOS with iOS 10

  See you soon!

• Not able to see the "calls cell phones iPhone" on the iPhone 4S

  Hello

  I have iPhone 4 (running OS 9.1) s and MacbookPro (running OS Yosemite 10.10.5). Im trying to make calls from my Mac, but while doing this, he throws me error that your devices are on the same network. IM guaranteed that they are in the same network.

  But after digging for a while, I found that the "iPhone cellular calls" option is not available on my iPhone. A specific reason for this?

  I connected with my AppleID on both devices. Can anyone help?

  That is not taken in charge on the 4.

• help with windows update errors and chkdsk

  I got a message saying I needed to update my windows.  I went to windows update, the express settled.  I received a message that says that I can't install the update to windows.  This is the message I received:

  The website has encountered a problem and cannot display the page you are trying to view. Take the following steps to try to resolve the problem: Refresh the page. In Internet Explorer, delete the temporary Internet files by going to the Tools menu and then Internet Options. Close and then reopen Internet Explorer.

  Then I'm defragmenting my "C" drive and I get an error with the States: Please run chkdsk /f.  I run that, once it goes through the whole process, I will return to defragment and I STILL get the same message.  I don't know how to clear these while I am able to update and to defragment my system.

  Thank you for your help

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  See also:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

• Update Windows errors and other problems.

  I just installed windows 7 on my computer. The problem is I can't seem to get the updates, I tried all sources (some worked, but did not resolve the full question). Patches some of the sources I'm like, Diagnostics Windows, Microsoft fixit and other software troubleshooting. Here are the two questions I have; 1. I try to check the windows update runs for several hours and then returns to "check updates for your computer. 2 updates show is ready to install on the stop button on the start menu, but not shown in WU. If someone can solve this problem, and I know that research on a certain need of people of this response, thank you.

  Your best solution is going to be a huge part of patience.  WU was extremely slow during the last 6 months.  I got a new facility just a day that lasted 7 hours ago to run.

  If your closing button indicates the exclamation point.  Do a restart and let him finish settle.  Return to Windows Update, then start it.  If you use a laptop, turn off the sleep function.  Go to bed and check in the morning.