Satellite A105-S4014 and fingerpint problem

Hello!

I have Satellite A105-S4014 (PSAA8U-O2200U) with Vista Ultimate and there is a problem of fingerprint reader. When I try to register my fingerprints (UPEK) using Protector Suite 5.8.0 program hangs for a while and then displays an error message: an internal error has occurred (rpnpipe:rpnpipe: No. - svr (00000001fusserver)).

For the fingerprint reader does not work.
I did a little research, tried the latest drivers and soft - nothing helped.
I also in the BIOS disabled TPM (I can't change) and I have a feeling that it is connected with my fingerprint reader problem (correct me if I'm wrong).

I upgraded my BIOS to 6.0 before this problem. Then I found on a forum for decommissioning of the BIOS to enable the TPM. So I downgraded to 5.1. Nothing works. Also I know that some manufacturers provide a BIOS setting that hides the TPM by default module.

Can someone help me to enable TPM in the BIOS or better give advice to get the fingerprint reader working?

Hello

Your ad is a little confusing, but I'll try to help you as much as I can.

First, the Satellite A105-S4014 laptop belongs to the American TV series and was designed for the American market. Therefore all the drivers, tools or utilities must be downloaded from the page of the American pilot.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

This page provides the Toshiba Fingerprint Utility for Windows Vista and XP. You must have version * 5.6.0 Build 322 published 08/12/2006 *.

Remove your old application and perhaps not compatible and install this new v5.6.0 one.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A105-S2071 - HARD drive problem

    Hi guys,.

    I have Satellite A105-S2071 and the last time my HARD drive died so I had to Exchange and I have a problem with the HARD disk drivers.
    Could you tell me what is the motherboard installed in my Satellite chip?

    And when I choose Control Panel > system > device > household devices > IDE ATA/ATAPI Controller > IDE channel base > avancΘs > current transfer type it shows me * does not *.

    What is the reason because my computer doesn't work so well and I think that's the reason

    Thx for any answer

    Detailed specifications, you can find the Toshiba site:
    http://www.CSD.Toshiba.com

    However, you have an ATI RADEON XPRESS 200 M Chipset. The display driver contains the chipset driver.

    I put t know your type of transfer does not apply.
    You put the SATA mode in the BIOS to AHCI or compatible?

  • I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

    Hello

    I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

    http://support.Microsoft.com/kb/310123

    It will be useful.

  • Satellite A105-S2051 and XPSP3 - upgrade RAM and hot key error

    Merry Christmas together,
    Please can some mention help: have Windows XP HOME SP3

    1. recently tried to improve my Satellite A105-S2051 950Mo to MAX 2 GB RAM. I have x 2 places available.
    2 a RAM problem, pc would not even turn when the two new ram sticks have been installed.
    3. If x 1 old used module and x 1 new stick of ram, pc would not record even installed extra RAM? After discussion with the manufacturer recommended to also upgrade my old BIOS suppliers, I did it via the load - SAME support.
    4. then they recommend - sent back 4 RAM chip, they returned with the type of chip 8,.
    5. upon receipt, PC would not turn on once more if the two 1 GB installed? While could then install x 1 old + x 1 new, pc recognizes the additional ram 1 x, 1.36 GB memory stick.
    6. have you tried to load keyboard shortcuts available on download media files to find error - Toshiba ACPI common Modules (TVALD) missing?
    8 tried to load files TVALD, to then find error - TVALZ DRIVER FAILED? aaaaaaaaaaahhhhhhhh
    Any help would be most appreciated, Please help!

    Kind regards

    Paul.

    There is no reason to discuss on the RAM upgrade, because things are clear: RAM upgrade will be successful if you use only compatible modules and module 1 GB for your laptop with PA3411U-2M1G part number.

    Use two of them, and everything will be OK.

    Back to WXP stuff.
    Installation of WXP can be quite complicated as all things, especially specific tools Toshiba and public services must be installed in the correct order. Before you begin to install Toshiba stuff, you must install common modules. It is a fundamental tool, and it must be installed first. Problem is that we support for your laptop model page, I can't find common modules for download.

    What you can try is to install from the European page. You can find it HERE. Check it out.

  • Satellite A105-S2141 - software compatibility problem Modem region

    Hello!
    I have a Toshiba Satellite A105-S2141 computer laptop bought in the United States. I am currently in a small country knowm as "Maldives" and unable to successfully connect and use the modem connection.

    The selection of region internal modem utility does not include the Maldives in the list and if I select a random country as "current location" I can connect only if I keep the speed of the modem at 2400. What should do? I tried the upgrade, but no uogrades are available. Other computers can connect normally on the same telephone line.

    Kindly advice. Is there another available modem which can be downloaded? Any other loophole?

    Post edited by: Luke_1

    Hello

    You don't need to use this utility select region of preinstalled modem.
    You can choose the Maldives using own settings of Windows.

    Choose Control Panel-> Phone & Modem Options->-> my position (Edit button)-> country (Maldives) dialing rules

    On the Modem tab, you can choose the modem you are using and can check the properties. Here, you can set the maximum port to a higher speed.

    Cheers and enjoy yourself on Maldives... big Islands... I wish that I would have enough time and money for the holiday he...

  • Need for a disk recovery for Satellite A105-S4014

    It's quite urgent, I need a copy of the dvd for A105-S4014 recovery. How can I get a?

    Thanks in advance.

    Hello

    The best and fastest is to contact the Service of your country partner. they can order one for you. Addresses you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  • In Satellite A105-S2236 RAM upgrade problems

    I'm working on a Satellite A105-S2236 for a customer. She has Windows Vista Basic - and did not come with 512 MB of RAM, so it is very slow. I went by Crucial and got another chip 512 MB for this computer - after installation, it shows again that 512 - I tried to change the chips, each chip individiually running into the two slots to see if 1 chip or locations did not work, and everything works fine - except with 2 512 chips - it shows more than 512 RAM.

    I spent some time on the phone with Toshiba - bascially for them to tell me that the motherboard is picky and will not recognize 2 different brand of chips of RAM. 2 chips are quite identical features except the one who came there is Samsung and the new is Crucial. I can't believe they don't work together.

    Someone at - it ideas?

    Thank you!

    Hello

    You won't believe me, but many people have reported the same issue with the essential modules. The best thing you can do is to return and buy products known and of good quality. If you want one, order the module of RAM Kingston. They will work for sure.

    Homepage of Kingston. You can find a list of all compatible RAM for your laptop model.

  • Satellite A105-S2051 memory upgrade problems

    Sorry for the huge block of text...

    This is not my computer, but a problem I need to fix nonetheless.
    I use a Toshiba A105-S2051 and I want to upgrade memory.

    When I have the original 512 and a 1024, it works perfectly, and I can move them to a port without problem.
    I also have a PNY 1024 that I can replace the other 1024 with and it works perfectly even in the two ports, but when I put the two 1024, it does not work (starts and stops quickly and repeatedly).

    Similarly, even if I let one of the 1024 in but remove the 512, computer does the same thing.

    Is the computer laptop for any reason + need + 512 to work?
    This is no logical sense in the PC world, but I have no idea on laptops...

    Hello

    Just a question: last chart shows an empty slot.
    Can you please check if the laptop works with all modules placed in this slot machine only?

  • Satellite Pro A100 and load problems

    Hello everyone. New Member here.

    Got a huge problem with my laptop. I have a satellite pro A100-830. Part number: PSAACE-00W002EN. About 2 years ago

    I can run on the current system. But it will not work on battery. I just bought a new battery and it shows on the computer.
    I get indications are:

    battery charge amber lit.
    Light on power
    Power meter indicates the battery charge. I connected new battery and it shows 47% and now 3 hours later its still 47%
    If I unplug the power to the computer shuts down and will not work on battery.

    the AC light seems to be slightly duller than the one next to him, if that makes sense.

    Ive tried updating the BIOS etc but I'm ideas if im honest as im not a computer pro. I searched the internet but I can't find an answer

    Huge thanks in advance

    Stand by.
    We need more explanation here.

    You have the same problem with the battery and you have bought one new in the hope that everything will be OK?
    Have you noticed the same problem with the battery?
    You bought original Toshiba battery?

    In my view BIOS update won't help you much. I think electronic power is responsible for this BIOS update ahs no influence on this.

  • Satellite Pro 4270 and network problems

    I just got a laptop, Toshiba Satellite Pro 4270... I installed win 98 on it and it works beautifully.

    But then I added LAN PCMCIA card in computer and wanted to do some sufring. I encountered a problem.

    In the next devices, win98 reports error handler:
    The NDIS. VXD, NTKERN. VXD or Chargers device for this device could not load the device driver. (Code 2).

    The card is 3Com Fe575C and I downloaded the latest drivers from www.3Com.com/warranty, but that did not help. I also ran regclean and reinstalled the card after that. Always the same fault. With my own laptop (win2k pro), the card works perfectly with no additional drivers, so the map itself is not defective.

    In addition, the Win98 find PCI card when starting, but I have no driver for that... Where can I get that? It does not specify which card that is...

    Hello

    I guess it is Win 98 Second Edition You are using on the 4270.
    Please go to driver download site and download the INF-update to the PC Card controller. I think this should solve your problem.

    While you are at it download the other drivers you need more.

    BR

    Tom

  • Satellite Pro M70 and chariging problems

    Hello everyone,

    I wonder if anyone can help me with my problem, my Satellite Pro M70 sometimes does not load when I put the charger into the socket, if I out of the power supply and leave it for 2 days I have costs for a period of time up to 20 hours, and then did the same thing.

    I tried to turn it on without the battery, to check whether the problem is with him, but he turns. So this led me to believe the problem isn t the battery.

    Can anyone help?

    > have tried to turn it on without the battery, to check if the problem is with him, but it won't turn
    You mean the power of t n for laptop up connected to the sector, but without battery plugged in?

    Hmmm, to me this looks like a bit of a problem with AC adapter or an electrical problem of power offers the Board of Directors. As you probably knew that, it is really difficult to provide suggestions without touching the laptop.

    First of all, you can check if the machine uses latest BIOS. If this isn't the case, update the BIOS.
    Check if the laptop would go also without battery and only connected to the network.

    If this does not work, then the adapter should be verified.
    If the AC adapter is ok, then, the motherboard must be verified

  • Satellite A100 heating and fan problem

    Hello

    I will try to describe my problem in detail because I so hope that it might help!

    I have a 5 years A100-011, Nvidia 7600 Go satellite. Recently, I fixed a display problem that I used to, however, this time (two weeks ago) him comes from the computer laptop back from the workshop with this heating problem. Which is the first time! The problem is the fan.

    When I start the PC, the fan works like it ti be long, maximum for 3-4 seconds. After that the fan barely works! According to me, the air coming out but very very low! less than how it is used for years! I came back to the same place, I corrected the PC. They checked and claim his fine and work! So, I give it a shot and tried the PC.

    Unconsciously, there is problem. Because the temperature of the GPU that has the problem, idling about reaching 60 c (SpeedFan) and goes high (65-67) while surfing the net! And using this way too much for internet!

    What makes it even worst fan always at the same speed very slow! The speed can increase little when he reached 67c!

    In this way, I can not use any high performance program, because the PC becomes more heated then stop.

    Note: I tried the following:
    1-BIOS (latest version) no available fan control
    2 power settings does nothing and there is no option of cooling method
    3 - fan control software. Unfortunately, nothing has worked

    I don't really know what the problem is! Given that the fan works but not all the time and why the GPU gets hot without doing something really serious! What is a cleaning problem? If so, why the fan does not reach its maximum speed at this temperature. !

    I hope I am fine help and answer here!
    PLS help!
    Thank you

    I agree with the user Notepad Akuma is 5 years old and I think that there is a lot of dust and debris inside the cooling modules that prevent fans from running correctly.
    Air can circulate properly and therefore the temperature rises
    So what to do?

    You can use a jet of compressed air to remove dust from the fans that I'm doing this regularly and it helps to clean the fans

  • Satellite A30 hibernation and activation problems

    Hello

    I got my PC toshiba laptop satellite A30 for 14 months now and have had no major problems so far. whenever I have disable my laptop or put it into hibernation, it restart normally the next time I use it, it is just like if it starts, then stops and turns off by itself and will be repeated again and again until I have remove the power cable and remove the battery, then put it back in and restart, and then it is normally.

    I checked and remove all viruses on my hard drive, but this issue concerns me.

    does anyone have an idea why this is happening?

    Thank you

    Hello

    have you tried to reinstall the Toshiba Power Saver again?

    One of my friends has also had problems of hibernation, and he relocated the energy saver!
    We dicussed on this subject and it may be that the hibernation file is damaged and must be obtained from new!

    To bye chris

  • Satellite L305-S5955 and starting problems

    Hello
    I have problems with my toshiba Satellite L305-S5955 to departure. When I push the Start button, sometimes it starts, sometimes not (even when it is in sleep or hibernate mode, press a button or the Start button don't work every time), and it is independent of the battery failure or AC power, I checked before. I took it to a repairman, continue and founder of failure has taken a lot of time, at the end, it works very well, but just two days. He said that the problem was in the bios. Now, I still have the same problem.
    -Bios version is 2.02. (never did an update).
    -OS: Windows Vista Home Basic.

    Can someone please help, or have the same problem to share.

    Thanks for reading.

    > When I push the Start button, sometimes it starts, sometimes not (even when it is in sleep or hibernate mode, press a button or the Start button don't work every time).
    > I took it to a repairman, continue and founder of failure has taken a lot of time, at the end, it works very well, but just two days. He said that the problem was in the bios

    I doubt s a BIOS problem, I think that it s more material related

    You can try this workaround simply:
    Unplug the adapter of the theca and remove the battery.
    Wait a while (2-3 hours) and reconnect the two parts.
    Then try to turn on the device

    If that does not help, then I guess that the question must be related to a problem on the electonic power motherboard or power that belongs to a mobo

  • Satellite A660 - fan and temperature problem

    Probably after that Bios Update to 2.3 increased fan is efficient and temperatures grew deadly
    So please help!

    I can't work on my laptop and the children cannot play in games (even simpler)
    regards and sorry for my English

    I imagine that this behavior is the result of the update of the BIOS.
    Can you please tell us what was the reason for the update of the BIOS? Sorry to ask this, but I always say that there is no reason to change anything, if there is not a serious problem.
    What to do now?

    In general, you can't do much, but what you can try is to contact the nearest Toshiba service provider, explain the situation and ask if there is a possibility for BIOS downgrade.
    I guess that they have access to the database of Toshiba and can get the older version of BIOS for you.

Maybe you are looking for

  • Yet WT8-A-102 - USB for pc connection

    So I have Toshiba still WT8-A-102 and I want to connect it to my laptop via USB, I OTG cable micro usb to usb female, male-male usb cable, but still my laptop can not recognize me, so I need you to install drivers on my Tablet? Friendly V

  • Difference between the cDAQ-9174 and cDAQ-9178

    I have several cRIO-9081.  Each cRIO-9081 running NOR-DAQmx 15.5.  On four of the cRIO-9018 we show you cDAQ - 9178 with 8 modules.  Everything just worked.  On the fifth cRIO-9018, we tried to connect a cDAQ-9174.  The aircraft appeared in the Windo

  • Get the same KB2446708 update

    On the bottom of my to-do bar he always tells me I have 1 important download but I have already installed this how to stop it from coming back Goryon

  • use the full screen of 9530

    Hi all I'm developing an application for touch screen in which I want to use the entire screen of the device. I'm unable to use the whole screen. I'm getting a footer on each screen bar I had a red mark around the bar. How can I remove/hide it so tha

  • My laptop does not connect to wifi

    My WiFi button is orange and turn white. It seems the my WiFi download has been deleted how can I get it back