Satellite Pro 4270 and network problems

Similar Questions

• Satellite Pro M70 and chariging problems

  Hello everyone,

  I wonder if anyone can help me with my problem, my Satellite Pro M70 sometimes does not load when I put the charger into the socket, if I out of the power supply and leave it for 2 days I have costs for a period of time up to 20 hours, and then did the same thing.

  I tried to turn it on without the battery, to check whether the problem is with him, but he turns. So this led me to believe the problem isn t the battery.

  Can anyone help?

  > have tried to turn it on without the battery, to check if the problem is with him, but it won't turn
  You mean the power of t n for laptop up connected to the sector, but without battery plugged in?

  Hmmm, to me this looks like a bit of a problem with AC adapter or an electrical problem of power offers the Board of Directors. As you probably knew that, it is really difficult to provide suggestions without touching the laptop.

  First of all, you can check if the machine uses latest BIOS. If this isn't the case, update the BIOS.
  Check if the laptop would go also without battery and only connected to the network.

  If this does not work, then the adapter should be verified.
  If the AC adapter is ok, then, the motherboard must be verified

• Satellite Pro A120 has network problems

  Mr President.

  I, Jayarajan.C.N, working as an Assistant Executive Engineer in the Kerala State Electricity Board, Kerala, India.
  We had a laptop brand Thoshiba (Satellite Pro A120 type; PTA83L-08L02N model number; SL.no. Y6131B1488H) as part of a package of type brand MD - 2000 Tesient relay.

  We use this laptop for other official purposes also. It works smoothly.

  But we were faced with the following problems:
  1. we could connect the computer laptop in Local Area Networking with other desktop computers and laptop. But we could not transmit or receive data from the other computer.

  2. we could connect us the laptop to the network in ad-hoc mode wireless and the laptop showed the link as 'excellent '. But as in the case of LAN, data may not be transferred or received.

  3. we tried to use dial-up modem to the laptop. But we do not have internet access. The error showed was 'busy line (error 676) '. In fact, the line was not busy.

  4. we checked to access internet using Reliance Netconnect USB modem after installing its software. He also failed in showing the "username & passwords are wrong in this area.

  5. I added an init string in the Toshiba modem commands: AT & FX1. But before that, I made a mistake. I installed the Client Services for Netware. After that, the connection mode was changed. But I don't know how to uninstall "client services for Netware". I selected the account control user - change the way users log on or off, I received the following message: "client for Netware has disabled the display of welcome and quick user agrees." To restore these features, you must uninstall client services for Netware. As I said before, I don't know how to uninstall the same. Now during log on, I have to use ctrl + alt + delete to log on.

  After you have added the string init AT & FX1, I have only seen the modem trying to catch the net until the "veryfying username and password. But he could not catch the net. Please note that I had installed the client services for Netware. I saw that the modem has been "connecting" even after a few minutes and I noticed the system reacted very slowly.

  In short, we cannot achieve any type of networking and by error logging has been changed...
  We ask your advice detailed without delay.
  Thanks in advance.

  Regarding
  DANIELA. C.N,
  Assistant Executive Engineer,
  [email protected]

  Hello

  Please don t be angry with me, but this is a user-forum user and please don t expect magical solutions or answers.
  However, I will try to give some suggestions.

  1.) Please check if you are in the same workgroup or domain and check if you have set the right rights to folders. In addition to check all the parameters of the firewall and possibly disable it please!
  (2) see point 1)
  3.) found a Microsoft document describes this error message:
  http://support.Microsoft.com/kb/187215
  or
  http://Xtra.co.nz/help/0, 5721-2513242, 00.html

  (4) Please check the user name and password. Please note; It case sensitive s

  (5) If you want to remove the Client Service for Netware, click on START/SETTINGS/CONTROL PANEL/CONNECTIONS NETWORK. On your CONNECTION to the local AREA NETWORK right click, select properties and click on it, then highlight "CLIENT SERVICES for NETWARE" and click the "UNINSTALL" below

• Satellite Pro A100 and load problems

  Hello everyone. New Member here.

  Got a huge problem with my laptop. I have a satellite pro A100-830. Part number: PSAACE-00W002EN. About 2 years ago

  I can run on the current system. But it will not work on battery. I just bought a new battery and it shows on the computer.
  I get indications are:

  battery charge amber lit.
  Light on power
  Power meter indicates the battery charge. I connected new battery and it shows 47% and now 3 hours later its still 47%
  If I unplug the power to the computer shuts down and will not work on battery.

  the AC light seems to be slightly duller than the one next to him, if that makes sense.

  Ive tried updating the BIOS etc but I'm ideas if im honest as im not a computer pro. I searched the internet but I can't find an answer

  Huge thanks in advance

  Stand by.
  We need more explanation here.

  You have the same problem with the battery and you have bought one new in the hope that everything will be OK?
  Have you noticed the same problem with the battery?
  You bought original Toshiba battery?

  In my view BIOS update won't help you much. I think electronic power is responsible for this BIOS update ahs no influence on this.

• Starting problems on the Satellite Pro 4270

  I have just received a satellite pro 4270 and told me it worked but when I turn it on all I get is a moon a cargo box that is not loading and a Sun I can here sounds of indoor work.

  Hello

  You also received the Toshiba Recovery CD?
  If Yes, try to start from the CD and try to refresh the operating system.

  You can also check if something appears on the external display.
  Try to connect the laptop to the second monitor.

  But generally, it sounds like a hardware problem it is a second hand unit, but I'm afraid the guy who sold you a defective phone: (m

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Satellite Pro 4270 update Win ME, Win XP

  Dear all,

  I want to update my laptop Satellite Pro 4270 of Win ME to XP. If I start the XP, program update
  starts but a message appears: "component a Toshiba Satellite Pro 4200 unit... GSXS system." If you go forward with the
  Update, it is possible that one or more devices / components system are´nt works more.., please update
  the system... »

  What can I do to make the update correctly, that is to say that the components of the system work with new XP system?

  Are there updates regarding this problem?

  Thanks for your help.

  Mr. kohl
  Germany

  Hello

  Also, I wasn't able to find the drivers for Win XP for this device.
  However, if you want to install Windows XP you can do, but as said above some functions may not work.

  The last possibility is to check the other laptop computer series and try to install drivers other laptops that support the same features.
  Maybe you about success.

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• Need advice on the installation of WinXP/2000 on Satellite Pro 4270

  Hello!

  (Sorry for the redundancy of this topic on this forum, too.)

  Please, any suspicion on this strange problem will be appreciated.

  I bought a used Satellite Pro 4270, with totally empty 6 GB drive, a pretty neat and apparently well kept machine...

  But, trying to make a new clean Win2000Pro installed on it, as previously successfully dozens of times on other PC machines, installation will be ending in a minute after that is to start with the 4 on setupdd.sys error!

  On WinXPPro new clean install, that the procedure will be stuck in less than 10 seconds, without any error at all...

  So, it might be the reason the cause?

  I tried several different corrective actions on this machine and guess several reasons, the cause, for example

  -the hard drive works fine on other machines and has also been fully verified and updated in shape at low altitude
  -copies of CD installation I tried several all work fine on other machines
  -the BIOS has been upgrade v2.70 just some time ago
  -the CMOS was turned off, i.e. in default some time ago
  -the machine was torn off at the minumum on audio memory, PCI, USB, etc.
  -the machine must be somehow strangely, which on the BIOS or HDD?
  -are there some 'weird' IDE or other driver disappeared on this case?
  -tests with installing Win98SE and FAT32 will not lead to a better result, just somehow different...

  Best regards

  Pete v.

  Hello Pete

  It's a really bad situation. If you do clean install of the OS you na? t need any special drivers. Everything must be preinstalled when installing the OS is completed successfully.

  If you have a few HARD drive replacement, you should try to use it and see if the HARD drive is certainly not responsible for this. The fact is that W2000 and WXP can be installed successfully on many other old models of laptops and because of that I can't imagine that it is not possible to do the same on your device.

  Is it always that W2000 is supported for this device and you can find that page to download all the drivers of W2000 on Toshiba.

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Satellite Pro 4270 LCD is slow.

  I Satellite Pro 4280 14 "and have no problem. I bought a second hand Satellite Pro 4270 13 "but the graphics on the screen appear to be slow. Tests using Direct X cube rotation is unclear. I've set up two screens mod with a CRT 17 '' monitor and two screens side by side, the CRT is icon perfect, but the 13 "laptop screen is too blurry. So I know that there is nothing wrong with the graphics card, just the screen. Is this normal for this model? or y at - it something wrong? Parameters are defined with the latest driver S3 Savage, which has not changed anything with all of the display of "display panel 1024 x 768 laptop. Using only the mode screen 800 x 600. Clues? Thank you very much.

  Hello

  Please be shure that your 4270 13 "is a demonstration of DSTN. The sharpness of a DSTN display cannot be compared with a TFT screen, which is used in the 4280.
  The 13 "the 4270 has a internal resolution of 800 * 600 max. DSTN, 4280 with 14" TFT 1024 * 768.

  Best regards

• Satellite Pro A60 and Port Replicator

  I JUST BOUGHT A SATELLITE PRO A60 AND USB2 PORT REPLICATOR. WHEN I ATTACH MY LASERJET 1100 AND PRINT A TEST PAGE IT PRINTS WELL BUT IF I PRINT A WORD DOCUMENT IT RELEASED FOR EXAMPLE GOGGLEDYGOOK. CAN YOU HELP ME?

  Hello

  I understand your problem in this way.

  You have connected the printer via Port Replicator ports for the A60 SatPro.

  Œuvres driver and so on correctly because the test page can be printed. But when you want to print from Word the printer isn't or what do you mean by "GOGGLEDYGOOK".

  Could you describe a little more detailly and give us some more information like Toshiba shipped OS or MS based installation, Service Pack installed, the name of the printer and so on...

  When you want to validate this information, it would be easier to help you!

  Bob

• Satellite Pro U300 Expansion Chassis problem

  Hello fellow users.

  I am trying to use an expresscard with my satellite pro expansion chassis. Problem is that in Device Manager, I am getting error code 12 for PCI bridges in the chassis and the error code 31 for the PCI bridge on the card I want to use in the expansion chassis.

  I installed latest version of the BIOS but cannot solve the problem.

  Slot for Express card in my computer is fine because I use an Ethernet Express of 1 card G without problem.

  Hunting on the web, it seems that the problem is related to the BIOS being unable to handle the number of PCI bus in the system, refer to the knowledge base article 942959 Microsoft. This article explains the problem and how to Vista and W2008 reslove.

  I am running XP and work around, that they said, does not work. Upgrading to Vista is not really an option as software I want to use is not yet the version for Vista.

  My only options left at this stage are fresh install XP to see if it corrects the problem, or vista fresh install and hope I want to use drivers/software works under Vista.

  Has anyone else seen this problem, got any other suggestions.

  Thank you very much

  Hello

  your problem is unusual, but what I want to know is: which model / manufacturer, what is this expansion chassis?
  It would be interesting since without knowing what we´re talking expansion chassis, it would be difficult to know where exactly the problem could be...

  Greetings

• Lack of Win98SE PCI/Sound driver for Satellite Pro 4270

  Hello

  I have an old Satellite Pro 4270 with Win98SE license.
  I have no driver CD and only a Win98SE installation CD. So I installed Win98SE.
  From Toshiba Web site show me a lot of drivers for Win98SE which I installed.

  But I have not found a driver for the PCI card that has a yellow "?" in the Device Manager. I do not mean the PCMCIA slots.

  I installed the driver of his Yamaha DS - XG, but I can not here any sound.

  So where can I find the PCI driver and sound driver better.

  John

  Great! :)

  Thank you for your comments.