Satellite A300 - 1 M 1 - Format without recovery CD?

Similar Questions

• Re: Satellite A300-1EI - where to get the recovery disk

  Hello world

  I did a very stupid thing! I have formatted my laptop satellite A300-1EI and discovered that I lost the recovery DVDs I've done?

  I called the dealer where I bought the laptop, but they have not the recovery disc for this model?

  How can I recover my original version of VISTA for my laptop?

  Is there anywhere on this site to download?

  I downlowded any drivers from this site, but I want the vista original back...

  Help, please

  Maybe you can order it from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Check it out

• Satellite A300 - how to start HARD drive recovery after own OS insatallation

  Hi guys.

  I have a question.
  I have a Toshiba Satellite A300, which came with Windows Vista.
  Normally I have the recovery with the normally pre-installed utility partition.
  After that I formatted the system partition, I installed a clean and fresh Windows 7 copy.

  My question is this.
  Since the recovery partition does not get soiled with, is there not a way to install the disk recovery utility hard back in recovery of Windows of F8 before the boot options?

  Please don't tell me that I need to have the recovery disk.
  I already did, I just want to find a solution because it is not that hard for someone who accidentally formatted the system partition and had not created the disks, but the recovery partition. My guess is to do some modifications in the files of the Windows recovery environment that are launched when you use the option to repair my computer at startup, because normally, HARD drive recovery utility appears as one of its tools-options.

  The problem is that I don't have to where these files are, maybe (C:\boot?)
  Currently, I am trying to see if a facility upgrade of windows 7 on windows vista will keep options for hard drive recovery then maybe I will find what it takes.

  All suggestions are welcome!
  Thank you for your time.

  OK, just a hint more, I found what is happening with the recovery environment, and which must be replaced to include more tools...
  This article was really helpful:
  http://www.techplat.com/2010/02/12/how-to-replace-default-Windows-7-recovery-environment-in-diagnostic-and-recovery-toolset/

  Also, I found a few guides microsoft on changing windows 7 recovery environment.
  http://TechNet.Microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
  http://TechNet.Microsoft.com/en-us/library/dd744525%28WS.10%29.aspx

  So I continue and I think I'm close...

• Satellite A300-1MC, does not need the recovery cd

  Hi all.

  My friend has a laptop Satellite A300-1MC that no longer works. When the laptop is on, it indicates that the hal file is missing. I know that we need to buy the recovery cd, since she did not have one when she bought the laptop.

  Can someone direct me to the Toshiba site, where you can buy these recovery CD since then?

  If not, can someone give me the phone number of support Toshiba UK.

  Thanks in advance.

  Hello

  Recovery media can be ordered under https://backupmedia.toshiba.eu/landing.aspx
  Toshiba UK support phone number is unknown to me, but maybe you can find it under http://uk.computers.toshiba-europe.com/innovation/home/

  By the way: why you need assistance? You have some serious problems?
  Let us know what kind of problems you have. Maybe someone here on this forum can help you.

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Satellite A300 - I can't find the recovery disk creator

  Hello world!

  Need help with my Satellite A300. I lost the recovery disc optical I burned when the laptop was new. Now when I try to burn a new disc of recovery can't get the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the left recovery files - a folder named HDDRecovery with 4.5 GB size. The problem is to know how to burn the disc.

  Can anyone help?

  iMate, Sweden

  Hello!

  You have reinstalled the laptop with your own version of Windows?

  The problem is that the recovery disc creator can t be downloaded. So I think you use HARD drive recovery function to restore the factory settings. After that, it is perhaps possible to burn the disc of recovery again.

  Good bye

• Vista format without recovery discs...

  Hello
  My problem is that I bought my laptop with windows vista in 2008, then I upgraded to premium windows 7 and now I've lost my recovery disc for windows vista. I want to reformat my laptop, this is it possible without recovery disc for windows vista? what I did last time was to reinstall vista and update again to windows 7.
  will it work if I only use the disc of windows 7 recovery or what I need to get vista recovery cd?
  Thanks for your replies!

  Download a copy of Windows Vista from the following link:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  *****

  Extract the installation files

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. The Windows Installer will start (close the installation program).

  

  Creating a USB bootable (directly)

  Download NovaCorp WinToFlash (use the download links to their FTP servers and avoid the FindMySoft download link).

  Insert a 8-16 GB USB flash drive (USB FlashDrive recommendations, see here).

  Open the compressed folder of Novicorp WinToFlash 0.7.0048 beta

  

  Start the Windows Setup Transfer Wizard

  

  Click on Next

  

  Select that you are the Vista folder where the installation files extracted.

  

  Read and agree with the license and then press to continue:

  

  Select continue to the warning.

  

  It will start to copy the files

  

  When it gets to 100%, press next and then finish:

  

  Create a .iso file

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Burn the. ISO file:

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

• Satellite A300 - how to get Windows 7 recovery disk?

  Hello!

  I have Satellite A300 with windows vista restore disk and I want to upgrade to windows 7! How can I get a?
  How much it cost?

  You get Win7 to older models of laptops. Everything you can possibly do is to order Upgrade DVD but hey Win7 Toshiba DVD facilities can not be ordered.

  Of course, you can get Microsoft Win7 DVD facilities and clean OS install. Download page for all the drivers, tools and utilities that you can find on Toshiba.

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye

• Satellite L755 - 16L - new installation Win7 without recovery option

  Hello...

  I have a Toshiba Satellite L755 - 16L.
  I want to re - install windows 7, but recovery option will erase everything... I don t want to use it, I saw a key at the bottom of the laptop for win 7, saying it is oa mea?

  So is there a way that I could do without clear all.

  Hello

  Please visit http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  You will find all the HARD drive recovery facility information and accurate information which will be deleted exactly (see Note).

  Product key down means that you bought laptop with preinstalled OS and valid license. This key belongs to the version of the OS preinstalled. Don t think you can use it for the activation of the operating system if you try to install the version of the OS using the Microsoft installation disc.

  > So is there a way that I could do without clear all.
  I put t know what do you mean under everything.
  If you want to have own pre-installed OS still best option for you is to back up all important data on external device and after installing the OS, you can copy it to computer s portable HARD drive.

• Satellite L550D-13V - how to recover without recovery disks?

  Hello

  I had a big problem. Win 7 Home Premium 64 BIT crashed on my satellite L550D-13V.

  I tried to fix it, but it does not work. So I decided to recover via HARD disk utility.
  Everything seems to be okay, but ultimately the tool said that errors have occurred. I tried to get it back again, but the process aborted with blue screen "PAGE_FAULT_IN_NONPAGED_AREA" this time.

  After reboot system told me that no bootmgr is available. I tried to start using the recovery disk, but it also seems to be defective because the system cannot boot from the disks.

  And there is my problem. I cannot start / retrieve now. Volume D seems to be OK - the HARD disk utility files are still available, but I can't create a new recovery disks and it is not possible to start in disk utility.

  You have any ideas?

  Thanks in advance and best regards
  Danny

  Hello

  The story is strange
  I m wondering why you are not able to boot from the recovery disc?
  Have you used the recovery disk created in the past or have you tried this drive for the first time?

  However, with regard to the error message: PAGE_FAULT_IN_NONPAGED_AREA
  I googled for that and it sounds like it could be linked to the fault memory.
  Perhaps one of the failures modules.

  Of course, this is just a personal opinion

  If a HARD drive folder is available on your HARD drive, then there is a small chance of getting the recovery of HARD drive to work. Here's an interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40790

• Satellite A300-211 - failed to start the recovery disk creator

  I just installed ultraiso program, when I opened the toshiba recovery disc creator this message appears

  An unexpected error has occurred.
  exit this application and start it again.
  (error code: 0D00F6-26-00000015)

  with an option only ok when I press on it, it seems once again, when I press ok for the second time, it disappears and the program runs. What can I do to stop this?

  Note: I had the same problem with the program of poweriso

  my lap is an A300-211

  Hi mate,

  Can you please tell us what is happening if you uninstall the program ultraiso? To be honest, ths program isn't known to me, I never heard of this.
  Then try again please.

  In the worst cases, you need to start recovery disc option HARD reinstall Windows. Then you should be able to create the recovery media. The HARD drive recovery process, I founded this:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite A300: Delete files from HARD drive recovery - how to download missing files

  Hello.

  I format partition D:, where was a HARD drive recovery file, now I can't recover my PC.
  Can simple question, I download this file from a Web of Toshiba site or from another site?

  You can not download files from HARD drive recovery or recovery image.
  You can order the DVD of recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Can I get Windows XP Home for Satellite A300-19(r) recovery?

  Hello

  I see that WXP drivers are available for my Satellite A300, but can I have a recovery for my Satellite A300-19(r) DVDs? Should I call Toshiba?

  Installation is simple and without error messages. I'm not experienced with installation of WXP and does not install ALL the drivers step by step.

  Thanks for your reply.

  You can order online at:
  https://backupmedia.Toshiba.EU/landing.aspx