Satellite A300 - a RAM module will not work

Similar Questions

• Re: Satellite A300-234 - product key does not work with another disk the

  Broke the new Satellite A300-234, flied Windows Vista. I did not the backup copy of the system. At the system from a disk of another laptop Toshiba A200-23d.

  The key away. What should do?

  Hello

  The point is that the product key from the underside of the laptop can t be used with another drive in Windows. It s just for the preinstalled OEM version and doesn t work with other versions.

  Normally you n t have to enter a product key if you are using the Toshiba recovery disc because it contains a picture of the factory settings and is different from a disc of Microsoft Vista.

  Anyway, as said Akuma you can order a new drive Toshiba Recovery directly.
  The another model of laptop recovery disk will not work because the hardware is different.

  Good bye

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• Satellite A300 - LED multimedia keys do not work if iTunes is reduced

  Hello

  I own Satellite A300 - 1 9 (PSAJ4E).
  Is it possible to let the LED buttons multimedia "Play/Pause", "RW" and "FF" to work even if iTunes is reduced to a minimum?
  Atm because they work only when I actually work in iTunes and the moment where I reduce iTunes taskbar it blocks for play/pause, etc!

  Thank you

  Jonas

  Hello Jonas

  I don't use iTunes and cannot comment on the functionality of the buttons with iTunes but I know it's Toshiba don't offer notebooks with pre-installed iTunes and these buttons are, by default, designed to work with Windows Media Player.

  You can use these buttons with other players, if possible, but Toshiba does not support the features with any other third party application. For example, I use these buttons with Winamp and everything works perfectly.

• Satellite A300-1GN - media buttons do not work with Win 7

  Hei

  I installed windows 7 to my Toshiba satellite a300 1gn, short model No.: psagce and some illuminated media buttons do not work.

  I have the last drivest but still nothing. first button is expected to control the lighting of media buttons, touchpad and Satellite logo.

  second button is expected to open media player or something like that. the other front buttons work fine!

  Could someone helt solve me my problem?

  Hi mate

  Have you installed the VAP (value added package)?
  This package contains the necessary application that controls the media keys!

  Please check European Toshiba driver page for this package and install it!

  Welcome them

• Satellite A300 PSAG4E - multimedia keys do not work on Windows XP

  Hello

  I have a Toshiba Satellite A300, model PSAG4E. I installed all the utilities of the shortcut key that I could find the drivers, but the multimedia keys download page don't wok.

  Can someone help me?

  Hi ElMonoHervido
  Make sure you have all the drivers installed (to download on the website of toshiba pls)
  You must also install:
  -common modules
  -utilities

  After the reboot it should work as you wish.

• Satellite A300 - 15 d-battery will not be charged

  I have the Satellite A300 - 15 d. The problem is when I plug in the power adapter for the laptop battery icon become (undetected) what is the problem?
  Note: This battery is new and the charger not charge this battery. Also, when I plug-out the bifurcation of computer charger after a few seconds.

  Please help me on this problem...

  Thank you best regards &,.

  Dr. Ahmed

  Hey Buddy,

  I put t know why you have a new battery, but what happens if you try to load the battery. It work?

  In other words, it s a bad battery or the perception of control over the work of mainboard doesn t.

• Satellite A300 1 9 Bluetooth does not work

  First of all, I would like to say that my English is not very good...

  I have a Satellite A300 1 9 (Vista) but the Bluetooth does not work

  I installed the drivers I found on the Web from Toshiba site...

  Problem is that it keeps in installation and sometimes he says: «to connect your bluetooth...» "but my bluetooth is in my computer so I turn it on and outside, but it does nothing... He continues and after awhile, he still says connect your bluetooth...

  What can I do?

  Thank you!

  See the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

• Satellite A300-1HV: light button does not work

  Hi guys,.

  I recently bought a Satellite A300-1HV, and while that in the store, the salesman showed me it was possible to turn off the light behind the function/media at the top of the keyboard buttons. It seems to do by simply pressing the first button (the mute button).

  When I got home I tried several times, and he did in fact machine do what I expected (i.e. off lighting). The manual describes the first button under the button "Mute or LED power. Later that night, I tried the button again once, but this time it acted as a mute button and either turns off the lighting. In addition, the second button (CD/DVD) no longer seems to work at all, although it lights up when you press.

  I tried the Toshiba Assist software and am able to manually turn off the lighting, but the 'Toshiba button Support' seems to have no effect on buttons. I guess this would allow me to set up manually a program runs when I press one of two buttons, but no matter what I ask it to run, it does nothing.

  It's as if there is a piece of software that should be run, leading the keys, that I do not have (or at least no longer have).

  Any ideas?

  Hello

  You can enable this back in the BIOS.
  You can access this menu by pressing the F2 key when turned on the machine.

  Select the Advanced section and turn on LED lighting.

  See you soon

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Spilled beer on Satellite A300-16I - now button does not work:

  Hello

  I accidentally spilled beer on my computer... not really what you need to do: S
  Well now, I have a little problem that my key 'h' that is not responding.
  So, when I press it and does not work... without 'h' are written.

  Is there a way I could fix this cause I don t feel like using the copy / paste function to write the letter "h"... Well I hope someone like solution :)

  Hello

  Hmm, in all likelihood, your keyboard needs to be replaced.
  I doubt that the only button H can be fixed and thus the entire keyboard needs to be replaced.

  Contact the ASP in your country and request a replacement.

  However, you can also use an external USB keyboard, but I think that it of better to have a laptop keyboard that works properly.

• Satellite A300-15J: touch button does not work properly from standby

  Recently I bought this laptop, works great except one problem...

  There is touchbutton for LED switching power.
  When I close or put the laptop in sleep, this button does not work like that but activates or disables the sound.

  I'm using Vista, I wonder if there is any patch or something for this problem.
  Thank you

  Andrew

  Can you please tell me if that happen after the day before, or after using the hibernation mode too?

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• Satellite R15-829: keyboard & mouse will not work on advanced port replicator 3

  Hello

  I have the following problem:
  I have a portable Satellite R15 829 Tablet. I went and bought a Toshiba Advanced port replicator (PA3474U-1PRP) 3 second hand. When I plug in a keyboard and a mouse for it, they won't work. However, when I have the laptop dock and power, of the function on the external keyboard blink.

  I had a load of a keyboard and a USB mouse, and they work, so it would be a kind of compatiability issue?

  So I know that there are be able to enter them. Could be a driver problem type? Or something else? If anyone has any suggestions, I would be very grateful.

  Thank you.

  Post edited by: mur_cott

  Hello

  This device is not known to me but please check if Toshiba Mobile Extensions 3 installed on your laptop. See also the version
  Check if the latest version of the BIOS is also installed on your laptop.
  If this isn't the case, then try updating the BIOS.