Satellite A300 - cannot install XP drivers

Similar Questions

• Satellite A300 - cannot install on XP sound drivers

  Hi all!

  I have a Toshiba Satellite A300 1 2 Notebook, and on Windows XP, the audio driver does not work. On windows Vista, I have no problem. The laptop had no Windows Vista preinstalled. The sound card is Realtek. I tried the drivers found on the toshiba Web site, from the realtek site. It doesn't work in all cases.

  Can someone help me?

  Hello!

  If you have a sound card Realtek and Windows XP, you must check out these articles from the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  It is a known problem and if you use the forum search, you can find a lot of discussions about this.

  Good bye

• Satellite A300 - cannot find the drivers for Windows 7 64 bit

  Hello!
  I'm of the Greece so I apologise for any errors of syntax, I can do.
  My girlfriend has the Satellite A300 PSAJ4E but his hard disk was destroyed, so I bought him a new (WD Scorpio Black 500 GB) and I downloaded the original Windows 7 MSDNAA to install on the laptop.
  The problem is that it doesn't have the drivers cd so I have to find them on the internet. The other problem is that on the Toshiba official support site it is not found the laptop or the drivers for it.
  So please help me find them. Or tell me if I can insert some of the other Toshiba laptop drivers to it.
  I am ready to format and everything and I don't have the drivers.
  Thank you!

  PS. I found this site but I don't know if it is normal to download them from this site and also, I don't know if I should because I will insert Windows 7 64 bit.
  http://driverswin.com/satellite-A300-psaj4e-drivers-Windows-7/

  Hello

  To download drivers use the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  There you can find your model of laptop and all drivers, tools and utilities for it.
  Can find you it?

  If you need help or assistance installation and the installation order please let me know.

• Satellite A300 - cannot install Ubuntu - empty flashing command

  Hello

  I want to install Ubuntu 11.10 on my Satellite A300 (psag4e), but when I insert the installation CD, boot hangs after this part of Toshiba with a flashing empty command line.

  What should I do?

  The value of the default BIOS and try again.
  Are you using the original Linux installation disc?

• Satellite A300 - cannot install the BT stack

  Hello evryone,

  I had a problem with the bt stack and the file "setupdiu.exe".

  When I try to install battery bt it tries automatically to uninstal the battery, the problem is I get the error:
  "The file Setupdiu.exe is not marked for installation.

  I looked everywhere, but the only solution given is: delete the folder "C:\Program Files Toshiba Stack.

  I got this deleted file, I got the hidden files and I tried to remove the map with CMD and all other means to delete something with her, but he tells me that the map does not exist.

  I deleted the folder bluetooth stack for windows by toshiba in my registry and restarted, this also does not work.

  I have Windows Vista Home premium (32 bit) and my laptop is a toshiba satellite A300-1OS.

  I tried the "Difficulty" of Toshiba, this installed bluetooth stack tool and I run, helped not a little.

  I really want to have this problem, because he bug on the other bluetooth software and connection.

  (Sorry for my bad English)

  I am grateful to anyone who can help,
  Live Justin

  I think the problem is, as you said, that the previous version was not properly removed. I would setup a tool such as
  "ccleaner" (free Internet) and clean your system registry and files. Maybe it works eventually. If not then your system in Mode safe start (press F8 during startup and check your system files again if some battery Bluetooth related files still exists and remove them if necessary)

• Satellite A300 - cannot install display driver

  So I formatted my laptop (A300-PSAGCA-0C301N) two nights ago, and be the fool I am I forgot to download and save the necessary drivers for my laptop.

  So when I started the laptop on a new installation of Windows Vista 32 - bit on a freshly formatted drive, my resolution was 1024 x 768. However, the complete standard resolution for this laptop is in fact 1280 x 768 in this direction, however, when I went to 'Customize' the max resolution, I was allowed to have is 1024 x 768.

  I went to this site http://www.mytoshiba.com.au/support/...download?os=15 and downloaded the drivers Wireless Lan wired and WiFi, the drivers of Intel Audio driver Chipset and ATI M82XT, M86 Display Driver.
  However, once I downloaded and started to install the ATi driver, I received three error messages just after extraction. the first box indicating: "Catalyst Install Manager could not initialize the Manager of detection."
  Just after the first box, I get another error box saying 'Catalyst Install Manager failed to initialize. "
  and then a third box saying "Catalyst Install Manager could not initialize the Package Manager".

  After the third zone, it proceeds with the installation, but after accepting the agreement of the user, I get these boxes of error;
  "Catalyst install Manager initialization failed"
  "Could not find installable components!
  and the installation screen then proceeds to say "Failure occurred at the facility".

  I am running Windows Vista 32 bit and using the Super Administrator account, so UAC is non-existent.

  Help please? I'm tired of being stuck at 1024 x 768.

  BTW, my GPU is an ATi HD3450.

  Hi Kabura,

  What happens if you install manual display driver through the Device Manager and the Advanced installation option where you can choose the driver and the directory yourself?
  It work?

  I had a similar problem, and it worked for me

  By the way: you must also install the latest Service Pack for Vista. See the Microsoft page for an update.

  Last point but not the least, of you n t post an installation order. The order in which you have installed the drivers? In General, the chipset driver should be installed first, then the display driver.

• Satellite L500D - cannot install all drivers for Windows 7 64 bit

  Hey,.

  the problem is that I installed Windows 7 Professional 64 bit yesterday. Before I was using Vista Home Premium 32-Bit, so it must be a clean install. I downloaded all the drivers for my laptop model (Satellite L500D-10R) from the Toshiba site. The problem now is that not everyone can be installed because with several I get the error message, for example with Chip Set Utility I get the error «this system is not satisfying the minimum requirements...» "in addition, when you try to install the Eco utility I get an empy message and stops the installation. What can be the problem here?

  And what's with Wi - Fi. When I plug in the ethernet cable to the Internet works correctly, but when I try to connect to my router (the ofc ethernet cable disconnected) he cannot identify my computer and gives me an error of network interface controller and says the reason is 0 x 00028001.

  Here is the error message (sorry for the language):
  + Deleted information - non-English language.

  Hi mate,

  With regard to the Intel chipset error message I can suggest only install this manual dirver via Device Manager. I had the same problem and if I could install the chipset driver.
  Check this box!

  Regarding Eco Utility, you must install all the drivers first, then Tools. Value added should be the first tool of Toshiba you install.

  You installed a driver for your wireless network card?

  Perhaps you need to restore the factory settings if you are not an expert of installing the driver ;)

• Satellite A300 - cannot install the Win XP SP1

  I tried to install my MS Windows XP existing operating system - original disc, has worked several times before - a model A300 - 29K, and it has not worked. (blue screen, error)

  (Vista can be installed - if the machine is OK)

  The question is: is it possible, that this model is not compatible with XP?
  (this version of XP is old enough, only SP1 - I usually improve with SP3 after installation)
  No idea how to install my version of XP on it?
  (the machine is sold without an operating system - so not any disk with it)

  Thank you

  Hello

  Of course, you can install Win XP. It s no matter what version is XP Pro, Home, MCE, etc..
  The problem may be the lack of SP2 and SATA drivers!

  First, you must create a disk for Win XP SP2 and SP3.
  For this, you can use the nLite tool

  Google for the nLite for more information

  Secondly, you use nLite to include the SATA drivers for Win XP disk.
  The SATA drivers are part of the Intel Storage Manager

  There is a lot of discussion on the installation of the driver SATA I recommend to use the advanced search option and read the content.

• Pavilion 15-K5C19PA #ABG: cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  Cannot install graphics drivers Nvidia for HP Pavilion Notebook 15-p102tu

  [my laptop is not install my window 8.1 nvidia driver 64 bit my new purchase Moose please help me hp] team?

  Hi @mnshahid,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15-p102tu and problems with NVIDIA drivers. Your system uses only the Intel driver high definition (HD). Here is the download if you needsp68117.exe. I uninstall Nvidia and reboot the laptop.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• Satellite X 205 - cannot install audio drivers

  Hey!

  I have problems with installing the audio driver on my Satellite X 205 sli1. I tried to install the drivers from the realtek site, but they doesen't work. Then, I tried to install the patches 'kb835221' 'kb88811' and that the drivers but still nothing.

  I can't find the drivers on the toshiba Web site. In everest, I checked my audio device is - Realtek ALC268 @ Intel 82801HBM ICH8M - high definition Audio Controller PCI.

  Please help me!

  Hey Buddy,

  In my opinion the easiest way is installation of Service Pack 3 for Windows XP. It contains patches for cards high definition sound and the other important security fixes. You can download it from the Microsoft Web site.

  But SP3 or patches must be installed * first * and then the audio driver. Otherwise it will not work.

  So my recommendations, uninstalling the audio driver and clean your system using the freeware CCleaner tool. Restart your computer and make sure and install SP3 if it s does not. After that, install the latest driver from the Web to Realtek site.

  Check this box!

• Satellite L300 - cannot install XP and need drivers SATA

  Hello

  Just download IMSM, I did nLite but still cannot install XP.
  I need good Manager Intel Matrix Storage Manager to Intel Mobile Chipset 45 or the SATA drivers.

  Please help me

  Intel Storage Manager, you can download on the Intel Web site. In the Readme file, you can see what chipsets are supported, but as far as I know the package contains drivers for all of the newer chipsets.

  The easiest way if you have a floppy drive, you must download the Configuration utility from floppy on Intel sites. This creates a floppy disk with the drivers.

  Otherwise, you must extract the .exe file. More information you can find in the readme file.

• Satellite A300 - 20v Win 7 drivers are not completed

  Hello:

  As a first step, I would like to thank all employees of Toshiba support for their hard work.
  However, there are a lot of drivers that not supported yet, and they are very important.
  As:

  First of all:

  Touch Pad Driver
  LAN driver
  Wireless LAN driver
  Card reader controller
  Driver webcam

  Second:

  Assist
  TEMPRO
  Utilities SD
  PRO series
  Face recognition
  Tiles for Mobility Center

  Third:

  Silent, Bluetooth Monitor, acoustic Robson, Modem on Hold Utility, driver Modem region Select utility, WPS library, and TRS.

  Please help quickly because they make too much trouble with us (especially for me)
  Because we cannot operate without these drivers.

  Thank you

  Post edited by: MEMO_1

  Hello

  Yesterday, I installed Win7 on my Satellite A300 (PSAG8E) and I'm very happy with it.
  You're right about the pilots, but it is not so difficult as you think. All things missing can be installed for Vista.

  Here is a brief overview of what I did to have perfectly working Win7:

  -Win7
  -chipset driver
  -Storage Manager
  -display driver
  -driver sound
  -modem driver
  -utility supervisor
  -infrared
  -patches
  -configfree
  -VAP
  Hardware - toshiba
  Control - HDMI
  -WLAN driver

  Everything works fine, but some drivers are missing.
  So I added some Vista stuff:
  -toshiba assist - works
  -card reader - installed correctly
  -webcam driver for A500 (wanted to have the latest version) - tested with Skype - works
  -pilot of the Alps - all ok, but no additional options for touchpad

  I hope this will help you.
  If you have any other questions let me know.

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Satellite A300: cannot start: blocked by Phoenix TrustedCore Setup Utility

  {SUMMARY: "Phoenix TrustedCore Setup Utility" appears every time you start, requesting a non-existent password.} How to get rid of this request? }

  This one is a little weird. We have a Tosh Satellite A300-193 mobile (Code manufacturer: PSAJ1E-01000XEN) purchased from July 2008 (via Getech educational scheme). We have (had) Kaspersky Anti-virus on this subject, but since his license has expired (and they didn't really like it), I was going to remove and install Avast.

  Kasperky removal instructions involve have their tool "kavremove" who say their instructions must be run in safe mode. So, after downloading the tool, I pressed F8 to boot into safe mode...

  ... And that's where things went wrong. Instead of typical black screen startup options screen, I got a splash screen at the level type, with a request for password of "Phoenix TrustedCore Setup Utility. We have never set a password on this computer, and I've never seen this particular screen before. After three bad guess (of course they're wrong!, and it does not matter if I leave the field blank), the unit turns off.

  Now when I turn it on, it just goes right to the request for password of Phoenix: I hit F2, F12, F8 or whatever it is. I can't establish why it should do, or how I can possibly bypass it. None of my password guess work (of course).

  I googled for hours (literally), closes the thing, I could find were instructions in [a post on the forum USA | http://forums.toshiba.com/t5/Windows-Vista-Windows-XP/Satellite-A205-Cannot-Access-BIOS/m-p/123075#M7749]. It was a partial solution: we can start the machine with this procedure (phew!).

  Unfortunately, it is not a permanent solution. After EACH stop, at the next start-up presents impossible demand "password." So it comes to pull the battery (again), to the phase of "discharging", battery, turn on and - it boots. Or at least, he has every time so far.

  This is going to be extremely painful. Any tips or to tackle the problem of pointers, which would be welcome. I will never see this request for password "Setup Utility".

  Thank you!
  David
  Edinburgh, UK

  Hello

  I think the password loss is the BIOS password.
  I m wondering why this password is displayed when starting if you have not set it

  However, the point is that the BIOS password can be removed if you n t know this password.
  Unknown BIOS password can be removed by a Toshiba authorized service partner.