Satellite A300: Polish character does not appear using hotkey with 'c '.

Similar Questions

• Satellite A300 - 15K: Polish character does not appear by using the shortcut

  Hello

  I am a fresh user of the A300 - 15K, and early on, I discovered that there the combination Alt + Ctr + c assigned from ATI (Catalyst Control Center) software. Unfortunately this combination should normally produce Polish character "to? (apparently not correctly on this page somehow after as I have copied from the word - it is stong focus on it - ' c' here is its capital version "-?").

  I am entered in the Catalyst Control Center and unmarked the use of keyboard shortcuts called (first this particular shortcut, then the use of hotkeys, usually), but I've reached this Catalyst Control Center stopped commissioning after the use of the combination.

  However, the necessary character of Polish does not appear. I can get the capital version with Ctr + Alt + Shift + c, but no normal version.
  A service center guy advised me to assign a different letter as combination of starting for the Catalyst Control Center and I did, but it was not the Polish character appear.

  I guess that there must be an error in the locale so I tried to change to English and Polish with zero results.

  Please help with some Word of the Adviser.

  Post edited by: Koster62

  Its easy to turn off.
  Simply enter the catalyst driver and there must be option as 'shortcut '. Turn the power off.

  I had the same problem.
  I remember that only it was really easy to turn off.
  You shouldn't have a problem with it.

• Satellite A300 - bar FN does not appear

  Hi all...
  I have a problem with the * Fn key features * that * bar appears to the FN key.
  It works to change the brightness, but others do not.
  At first, * to the perss FN key *, appear on the bar high who now is not yet
  I ask you a solution.
  Thank you

  Is what model? PSAxxx-xxxxx

  What version of Windows is it?

  Have you installed Windows yourself? Or is this a pre-installed image of Toshiba?

• Satellite A300 - easy (key) does not not after SP2 update

  Satellite A300 easy (key) does not...
  I have recently upgraded my Vista SP1 to SP2 (do not know if this is the problem, but I'm pretty sure that's not)

  Yesterday, I discovered that my easy keys no longer work. Lights are out, when I press the keys, the light comes on and goes off again as they do normally, but no reaction on my screen (can not turn on any light without restarting my computer and select turned ON manually cannot transform media of windows opened by the touch and play the key do not work).

  Is it supposed to be a driver or something for this?

  Sorry for the bad English...

  Hello!

  A few days ago, I had the same problem on my laptop Qosmio. Lighting keys stopped working after installing some updates and the 3rd application programs the keys no longer works and also the lighting.
  At the end of the story, I had to reinstall Windows :(

  In any case, now, you should try to reinstall the Toshiba value added Package. He controls these buttons that you want to say and you can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing you need to remove the old version first, restart the computer, clean up your Windows with CCleaner for example, restart again and then install the new VAP.

  Good bye

• Re: Satellite L655-11N - Webcam does not appear on the video chat

  Hello, recently I had a problem with my webcam on Toshiba L655-11N
  It worked perfectly when I chat with my friends on Facebook, Yahoo, Skype

  But now I can see my friends, but they cannot see me, even the webcam does not appear on my screen even though my webcam, it works when I double click on its icon and I can take pictures.

  Windows 7 Home Premium 64-bit

  Hello

  > when I double click on its icon and I can take pictures.
  So hardware webcam seems to be OK.

  > But now I see my friends, but they cannot see me, even the webcam does not appear on my screen
  Have you checked the settings of applications only cat?
  Recommend doing this.

  Also, the webcam software is preinstalled on your laptop and you could test the functionality by using this software of the webcam.
  Usually, this should be available somewhere in all programs-> Toshiba

• Satellite L655-11N - Webcam does not appear on the video chat

  Hello, recently I had a problem with my webcam on Toshiba L655-11N
  It worked perfectly when I chat with my friends on Facebook, Yahoo, Skype

  But now I can see my friends, but they cannot see me, even the webcam does not appear on my screen even though my webcam, it works when I double click on its icon and I can take pictures.

  Windows 7 Home Premium 64-bit

  What happens when you start preinstalled Toshiba webcam application?
  Check it please all settings, especially for effects. Ensure that each option is set to OFF.

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite A300-1NO - webcam does not work, but the LED lights

  Hello!

  I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

  Is there any solution for this?

  > Is there any solution for this?
  I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

  I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

  One more thing: have you noticed this problem in the first moments after installing Win7 or later?
  Have you installed something that may be the reason for this?

• Satellite A300-15 a does not start after the installation of the alcohol program

  Hello...

  Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
  It does not start in any mode.

  I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

  Can someone tell me the solution?
  Please help urgent

  "A problem has been detected and Windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

  Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

  OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
  You should then be able to enter in Vista without problem.

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Satellite A300 FN + F5 does not work properly

  Hello
  I have a Satellite A300, PSAGCA-09U01N.

  I would like to connect a coard S-video from my laptop on my TV, and when I press FN + F5, I don't get the icons appear along the top of my screen _anymore_.
  I always get the plug S-video works, but going from normal setting (just laptop screen) by other modes ('laptop screen + TV' etc) is very slow. Can someone please.

  Hello

  Hmm... If the icons don't appear if you press a FN key you must reinstall Toshiba value added package if you use Vista or Windows 7. You can download it on the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com

  Value added package controls the FN and enlightenment for example keys in order to check this!

• On Satellite A300-1MX webcam does not work properly

  After my windows Vista system crashed 16 December 2011, I had made recovery.
  After that, I have not found any driver for the webcam on the computer laptop everything. On the Toshiba support page, I finally found the 1.7 version, but this does not at all!

  He always appears: driver Webcam open fails, restart the computer or the camera. Since it's built in camera I tried with the restart of the computer, but which did not help at all. So I tried with the option to repair the driver with Install Shield Wizard. The program has done something, but without success.

  So I uninstalled and reinstalled and it did not help at all!

  Someone has an idea?

  Hello

  Found an article in the knowledge base of Toshiba which describes this error and provides a solution to this problem.
  + Why displays the error message: "Webcam driver open fail. Restart the computer or the camera. » ? +
  + http://aps2.toshiba-tro.de/kb0/OPT84026F0000R01.htm+

  But its related to Portege M600 and Satellite U300 only.
  However, you should also try to perform a BIOS update. After that, set the BIOS to default settings and save the changes. Then try to reinstall the software of webcam once more.

  You should also check the Device Manager. Here in Device Manager that the webcam should be recognized as a USB device, if this isn't the case, then it means that the webcam was not recognized by the OS and that means there could be a hardware problem

  As far as I know, the webcam is connected to the USB controller on the motherboard. If the cable connection is lost, then the webcam is not recognized in Device Manager; or as a USB device or an unknown device.

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• Satellite A300-276 - webcam does not - locked by another application

  Hi guys,.

  My name is Mirella and I want to know one thing.
  My webcam works well, but my computer was not.
  Then my mother sent him to her friend (he is a computer technology).

  I don't know what he was doing, but my computer came back with the same things :/ And now my webcam kept good job. But after a few weeks my webcam stopped work :(
  I don't know what happened.

  I uninstalled a few programs because maybe he can return to work, but does not work it. If I open the camera software that say "Locked by another application" but I don't have any strange program on my computer.

  Please help me!
  Thank you<>

  > I uninstalled a few programs because maybe he can return to work, but does not work it

  Do you too uninstall webcam software?
  Generally, this error appears if another software like Skype for example uses the webcam at the moment at the start of the webcam software.

  You must uninstall the webcam software in Control Panel-> software
  Then you must also uninstall the driver for the webcam in Device Manager. The webcam should be listed under imaging devices.

  Reboot the laptop. Download the CCleaner and clean the registry and operating system using this tool. Reboot once more and install the webcam software once more.

  Also make sure that other software like Skype does not work at the same time.

  From my experience, this should help.

• Satellite A300 - S-video does not detect TV

  Dear all
  Last week, I bought your new product: Toshiba Satellite A300

  I liked its release specifications specially s-video.
  When I arrived at my house, I have it plugged into my TV:
  Bomba Toshiba 29A3MJ
  http://www.Toshiba-Gulf.com/site/product/prd_details.asp?prdid=1044&CATID=123

  I used S-Video/RCA cable:
  http://www.accessories-shop.NET/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg

  Then, I put the TV fashion which I usually use to another laptop.
  I kept clicking on Fn + F5 on the satellite phone without exploitation.
  Nothing has been posted on the TV screem.
  Before, I used to connect to HP Pavilion dv2000 in the same TV using the s-video and it worked fine.

  Please advice how to solve this problem.
  Best regards

  Hello

  Usually, this should work.
  Both devices must be OFF. Connect then the laptop and the TV using this cable.
  Turn on the TV and the laptop starts.

  If the use of the FN + F5 will not detect the image on the TV then I would recommend checking the settings in your graphics card properties.

  I put t know what graphics card you have, but my Satellite phone has been equipped with the Intel graphics card and I can change the settings in Control Panel-> Intel GMA graphics card.

  Maybe your laptop supports the ATI card. If these parameters were in ATI catalyst.

  PS: Check if you are using the latest version of the BIOS and the latest graphics card driver too.