Satellite A300 - unable to connect to a local wireless network

Similar Questions

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to a specific wireless network

  I'm currently sitting in a café, connected to their wifi WPA2 with my MacBook.

  I can not connect to the same network with my iPhone 4S. It just do not see it--other networks, Yes, but not the coffee. I tried to reset the iPhone; the other networks still appear, but not the one I want to join. I tried to connect manually several times with 'other '.... ', using my MacBook to check SSID and password of the wifi, but the iPhone says that it cannot find the network let alone accede.

  It's a signal very strong: the wifi bars are entirely black in the menu bar of my MacBook. My iPhone can see half a dozen other wifi networks, including those where the router is not as tight as one that I am trying to connect. I can not not connect to others: either they are password protected, or require a customer relationship or are not worthy of trust.

  What is going on?

  Just to add: I know that the standard Apple FAQ on connectivity issues iOS wifi; they are not a help here.

• Unable to connect to L7580 on wireless network

  Hello and thank you in advance for the help.  I'm on a Dell Precision 490 running XP Pro, version 2002, SP3 and recently connected to the network here at the office using a Netgear Wireless - N 300 PCI adapter.  I have Internet access so I know that the computer is in talks with the router, that is a Time Capsule from Apple.  We have a L7580 all-in-one already connected to the router via USB and printing from other computers, and I would like to print this Dell also.  The other computers are Macbooks which are plugged in and out of the network when users are in the office.  When I went to download and install the latest driver for the printer, I get as far as the configuration of the network window and it comes back to "no network printer not found.»  Then I click Next for assistance and I get a network connection window asking me to choose what type of connection I want to have the printer, but the printer is already connected!  I'm confused.  I tried to ping the router using the IP address provided by the configuration page of HP network that I printed from the printer, but it happens to expire several times and then says 100% loss, which doesn't look good.  I think mixing a PC with a Mac wireless system is probably not going to work, but I want to make sure before I have to run a long USB cable to the printer.  If I have not provided enough information, I will be happy to fill in the blanks.  Once again, much obliged for assistance.  See you soon.  . .

  Thanks PrintDoc, turns out I have to not need to go there.  I tried a model list titled "HP OfficeJet LX' where I guess the X was for any series beginning with L and the Wizard completed, and I was able to print this page.  Back in the saddle.  Thanks again for all the help!

• Satellite A300 1QE - Windows can't find any wireless network

  Hello

  Please help me with a problem of annoing with radio.

  The story is like this:-J' I bought a laptop with Vista preinstaled... I used only once the wireless and worked very well... after a while I have reinstaled Vista, vista ultimate editing... I used 2 days the wireless and then suddenly found no more... wireless network I have reinstaled vista 2 weeks ago, and now I bought a wireless router and set a network... same problem : "Windows cannot find any wireless network"... with a laptop dell, I found 2 networks (one I created and the other a neighbor with very good signal).

  Collaborative I've tried:

  1 http://aps2.toshiba-tro.de/kb0/TSB9602NC0000R01.htm - in the directory toshiba\wlan there are 3 directories: intel, atheros and realtek... following the steps, the only factor that installs is intel one... If I try to navigate to the folder Realtek can't find anything compatible... (the network lan card is realtek, so I guess that the Wlan should be the same... as also indicated in the url)

  "I have the latest drivers from the toshiba Web site
  "the wireless is a turn on"

  2. I thought that might be a vista problems, so I instaled all the vista updates available... still no work

  The next sollution I try is updating the bios, but I have no whink it is useful.

  So please help me with a sollution for my WiFi problem!

  Thank you

  Hi creativu22,

  First, you must identify the type of wireless network card before you begin to install all the drivers available. Therefore, you can also search with vendor and device ID.
  Check this box!

  If you have installed the driver successfully and your wireless network adapter is listed in the Device Manager, you must check the TCP/IP settings. Maybe you need to use static IP addresses, but it depends on your router.

  Try turning off also in Power Options Windows WLAN energy saving features!

• locked settings by the adiministrator system and unable to connect with the new wireless network

  I changed my ISP and routers.  I need to change the settings to the new router wireless.  However, when I try to access the network settings on the printer through the screen on the printer, it is said that it is locked by the system administrator.  I am the admin.  Where can I access it without being on the network?  I tried to reset to the default values of factpry, but the same problem exists; It is blocked by the system administrator.

  I was able to solve the problem.  I went through the set up using the USB cord.  Then I switched it to wireless technology.

• Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  I received an email indicating that HP does not show me as having all printers which explains why I have not received information of driver update I guess.  But when I typed in HP4500 G510, I received the following error message:

  Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  And since I don't know beans about computers, I don't have any idea what it means.

  Because I had to pick a topic, I chose the one above, but no other choices were nowhere near cover.

  Hi mac64.
  I understand you are trying to register for updates for your Officejet 4500. I can certainly help you with this.

  I'll give you a link to try to register for driver updates. Please let me know if it's the same link you used and if this works differently for you, simply click on the following link: the HP driver updates.

  Hope to hear from you soon

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Recently installed vista update. I can no longer connect to my home wireless network.

  Recently installed vista update.  I can no longer connect to my home wireless network.  I get a message that says 'wireless link failed because windows did not receive response from the access point or wireless router.  I troubleshott he said of computing could be from low signal strength and yet it shows the strength of 100%.  Anyone have any ideas?

  Hello

  Check the firewall it is maybe it has been reset.

  In general.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connecting to the wrong wireless network.

  Nope.  Tried to make this process a few times just to make sure that I was just doing and still it connects to the wrong network.  Something else I could try?

  I'm in the boat the same, did you ever get a resolution on this?

  Separated from the<>https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connecting-to-the-wrong-wireless-network/633fcfd6-7bdd-4369-b66f-94611c5df76e >

  Here are some solutions to try if you can't connect to Wi - Fi. Follow the below mentioned steps to solve the problem:
  1 remove the network and let Windows re - find. Then enter the password again.
  http://Windows.Microsoft.com/en-in/Windows-8/get-online-tutorial
  2. change the TCP/IP settings, if the IP address is set to manual
  http://Windows.Microsoft.com/en-in/Windows/change-TCP-IP-settings#1TC=Windows-7
  3. If none of the above steps work, follow the link to solve the problem below:
  http://Windows.Microsoft.com/en-in/Windows/cant-connect-to-network#1TC=Windows-8

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• Satellite A300 - does not connect to the secure network to WPA

  Help please... new Toshiba Satellite A300 - running XP Professional with atheros AR9281 (driver 7.6.0.200) wireless network adapter will not connect to the secure networks, WAP, but seems to be fine with the WEP and non secure networks?

  I can connect to my WAP secured network using LAN cable and also if I use an external Netgear wireless adapter, so the problem is probably with this adapter or driver. I updated the bios and tried update driver, but no luck. Current driver is (I believe) more up to date?

  Would be grateful for your help.

  Thank you.

  On the Toshiba site is a newer version of the driver available (7.6.1.149.1)
  Then I would try the new driver.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers