Satellite A300D - 14 p - no sound after installing Win XP

Similar Questions

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• Satellite L350D - 12 M PSLE0E - no sound after installing Win XP

  Hello

  I installed Win XP SP3 on my Tosh laptop.
  I have everything works except the sound.

  We know of a compatible for this model sound card driver in XP.
  I downloaded the bucket full of HD and AC97 Realtek drivers, but none seems not to work.

  I'm really struggling with this one and do not want to go back to Vista.

  Reall any help is appreciated. Robbie.

  Hello

  I had the same problem with sound after installing XP everything seemed fine but no sound!

  I found a solution;
  You need to install the MS patches; KB835221 and KB888111
  These hotfixes must be installed before installing driver sound!

  But I put t know how it works with SP3. I think that you need to remove the SP3 first and then you could install the patches mentioned.

  However, once the patches have been installed, you must follow with the Realtek HD audio driver installation. The latest driver should be placed also on the Realtek page too.

  Well, in my case it worked so it should work on your laptop too!

• Satellite U200: There is no sound after installing Windows XP

  Hello

  I HAD INSTALLED VISTA ON MY SATELLITE U200, BUT I HAD SOUND PROBLEMS AS MANY PEOPLE

  No, I reinstalled xp recovery disk, but still sound does not work

  Can someone help me? installation of the drivers, etc.

  Best regards

  Joeri

  Hello

  As you already suggested many people have had sound on Vista OS on Satellite U200 problems in the past.
  BUT there is a SOLUTION! Yes, there a way to get a sound in Vista.

  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20898
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21171

  It seems dumb has been activated and so the sound did not work

• Satellite M60 - BK3: cannot get sound after installing Vista

  Hello

  I installed Windows Vista Ultimate (32 bit) on my Toshiba Satellite M60 - BK3, but I can't not all sounds is the correct video settings. I searched on the internet and it seems that this family of satellites is not supported to be upgraded to Windows Vista: S

  Does anyone have an idea of how get these drivers to make my laptop works fine with Vista?

  Thank you.

  Rodrigo

  Hello

  This Satellite M60 - BK3 model does not work for me. Where did you buy it?
  Try to install a hardware diagnostic tool to know what sound chip and the graphics card supports this laptop.

  You can download the drivers from the part manufacturer's website.

• Satellite L300 - no sound after installing Win XP

  Hi all

  had to install xp because vista is not good for me. the system does not install sound card drivers, and Device Manager, there is no listed his card.
  I have yellow? marks on "PCI Device" I think it's the soundcard and "network controller".

  I searched this forum and got some results that looked like they can solve the problem, but unfortunately the recommended fix was removed by Microsoft.

  * Before would be to install the audio driver, you must first install the *.

  * KB888111.* and AUDIO KB835221 hotfix
  * Here are the patches from Microsoft. Search the net for download *.

  * After installation, restart the operating system, and then try to reinstall the driver sound again.*

  Microsoft, still have KB888111, but no KB835221, as they claim that it has been proven to fail!

  any ideas?

  very appreciated

  g

  Here is the link to the missing patch.

  http://files.FileFront.com/kb835221exe/;9494950;/FileInfo.html

  Hope this helps you.

  Thank you

  John

• Satellite U300 - 11y - no sound after installing win XP, SP3 rc1

  Finally got my U300 working with XP, but I can not get the operation. The proper drivers are installed, but nothing. Hardware working on Vista, so this seems like a driver problem. I think realtek for somereason Setup is not totally complete the configuration.

  I followed the advice on
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=99567 but no luck.

  Becomes pretty nervous now, I need sound for Skype in my company.

  Thanks guys,.
  Tim

  Post edited by: ADMIN

  I have seen working on Satellite U300 WXP and well I used Skype. The sound quality wasn't the best but it works.

  Somewhere on this forum I found info on Microsoft KB888111 and KB835221 patches. This should help not working sound on Windows XP Home edition. Please check it out.

• Satellite L40-18 X: no sound after installing XP

  Hallo

  Please help me. Some time ago I bought laptop Toshiba Satellite L40-18 X.
  The orginal, it had the Vista operating system. I reinstall Windows XP with SP2.

  After that, I have a big problem with the sound card. Summary I have audio on my laptop.

  Can someone help me and give me some advice how can I eliminate my problem?

  Thank you

  Maybe you find the answer yourself?

  Already search you in this forum for similar cases?

• Satellite A200 - 20 H - no sound after installing Windows 7

  Hey guys.

  I just bought this computer from a buddy and I decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play sounds. There is not its what so ever on the laptop, all cursors are at max, I tried to push any difference of Pentecost FN + ESC. I tried to reinstall and update sound card driver, lucky either.
  I found a "soloution" who said that I should install value added package, and then run an application, which should reactivate the PC, no luck there either...

  So I start running out of ideas?

  So I am hopeing you smart guys here has a soloution.
  If you need any information from the computer, just ask for them and I will answer you whit them as soon as possible.

  Many thanks in advance

  Kim Jensen

  Hi Chillos,

  If you read this article, you can download a tool to turn the sound back on:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  If it doesn t work it would be interesting to know if you can hear the sound from the external speakers or headphones for example.
  Check this box!

• Satellite L40 psl40e - no sound after installing Win XP

  I installed windows xp sp3 on my psl40e and can not get the sound to work. I downloaded the drivers all day and couldn't go. I installed everest and it says I have Intel 82801 GB ICH7 - High Definition Audio Controller.

  Can anyone help? Thank you.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100688

• Satellite U300 - no sound after installing Win XP

  Hello

  I just reinstalled windows xp Prof today and upgraded to service pack 3.

  Sound has worked well in the first until a reboot, no more noise.
  A few reinstalls the drivers now, sometimes he says its all installed fine, other times it says no audio devices installed.

  In both cases there is no sound...
  Sometime on a restart (many reboots today) the sound suddenly came back to life, to die again at the next reboot...

  Im hoping someone can help me with this problem cos Im leaving on vacation tomorrow and really need my sound ;)

  Thanks in advance!

  Hello

  You should on Windows XP two audio patches if you have a card high definition audio:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  These updates are in integrated SP3, you must install Service Pack 3 or the updates first, then the audio driver. So in your case, I would like to delete the sound driver, use CCleaner and then install the latest version from the Toshiba site.

  Good luck!

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• Satellite A100 - can not use Wifi after installing Win 7

  Hello

  I have a laptop Toshiba A100 of broadcasting.
  After 4 years of use, he was once hit by attack of virus and after detection, I got my laptop to format.
  and now, Windows 7 Home Premium has been installed (originally my OS is Windows Vista).
  Now I'm not able to use Wi - Fi.

  Please suggest me the procedure I need to follow in order to access wireless networks.

  My machine configurations are:
  1 GB of RAM
  HDD of 80 GB + 500 GB external support
  WINDOWS 7 Edition Home Premium
  1.6 GHz FREQ.

  Hello

  Have you installed the driver Wlan?
  The wireless network adapter is visible in device-> network cards Manager?
  Check it!

  In addition it s interesting to know if you are able to activate the WLan using FN + F8?
  If you will not be able to do so, you must install VAP (value added package) and Flash memory card Support utility.
  Check these two tools that have been published in Satellite L500 driver download area

• Re: Satellite A200 Touchpad work scroll dosnt after installing Win 7

  When I change my windows XP to 7 w my scroll dosen t work.
  What should I do?

  Sorry for my English...

  Hello

  You must install a compatible touchpad driver.
  Choose the Satellite L500 on the European driver Toshiba page.
  Here you will find 2 touchpad Win 7 drivers; Alps Electric and Synaptics.

  Both must be installed!

  Welcome them