Re: Satellite A200 Touchpad work scroll dosnt after installing Win 7

Similar Questions

• Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

  Hello.

  I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

  I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
  The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

  The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

  Now, I can't play games or watch movies.
  Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

  I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

  If I try to put it above it is always black.
  Can someone help me?

  Thank you very much

  Hello

  First of all, you should visit this Australian page from Toshiba:
  http://www.ISD.Toshiba.com.au
  You will find all the drivers for this model of laptop.

  I checked and found that there is a BIOS v2.5.
  Check if the BIOS needs to be updated (if the older BIOS is installed)

  In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
  Install it!

  Last but not least the Win XP should be updated to the latest state!

• Satellite A200-1GH - system is slow after installing Bluetooth

  Hello people, I have problem with my laptop Satellite A200-1GH (PSAEC).
  Everything was good until I instaled the Bluetooth driver, then everything went wrong.
  The system (Vista Home premium-32-bit) is very slow and nothing done wrong!
  Can anyone help me please with any sugestion?
  TNX and sorry for my English!

  What do you mean with nothing else does not do well?

  You have installed the latest driver on the Toshiba site? Check it! http://APS2.toshiba-tro.de/Bluetooth/

  Perhaps the error is not caused by the Bluetooth software. You can see an application in the Task Manager which have a high utilization of the processor?

• Satellite A300D - 14 p - no sound after installing Win XP

  Hello

  I just intalled XP and everything works fine, just a problem with the sound.
  I instaled driver sound and sound is very high up with no bass, I didn't have this problem when I had VIsta or Win 7 installed, it must have something to do with drivers.

  My windows is established to date, have SP3 and everything works perfectly.

  What should I do?

  Thank you!!!

  Nikola

  Hello

  I had the same problem.
  But I could solve this install Win XP fixes needed.
  You must generally 2 patches:
  AUDIO patch 1: KB835221
  AUDIO patch 2: KB888111

  But these fixes are also part of the SP3.
  So if you have previously installed SP3, you don t need other patches.
  Bu the point is that SP3 must be installed before installing the audio driver.

  If you have already installed the sound driver then delete the system.
  Go to Device Manager, then remove the sound card from the list of devices and all devices high definition.
  Restart the device and then reinstall the audio driver.

  This is beneficial because it has helped me too.

• Satellite A200 - 20 H - no sound after installing Windows 7

  Hey guys.

  I just bought this computer from a buddy and I decided to install Windows 7 on the machine. Everything seemed to work brilliant, until I wanted to try and play sounds. There is not its what so ever on the laptop, all cursors are at max, I tried to push any difference of Pentecost FN + ESC. I tried to reinstall and update sound card driver, lucky either.
  I found a "soloution" who said that I should install value added package, and then run an application, which should reactivate the PC, no luck there either...

  So I start running out of ideas?

  So I am hopeing you smart guys here has a soloution.
  If you need any information from the computer, just ask for them and I will answer you whit them as soon as possible.

  Many thanks in advance

  Kim Jensen

  Hi Chillos,

  If you read this article, you can download a tool to turn the sound back on:
  http://APS2.toshiba-tro.de/KB0/TSB7C021B0001R01.htm

  If it doesn t work it would be interesting to know if you can hear the sound from the external speakers or headphones for example.
  Check this box!

• Satellite click on Mini - some problems after installing Win 10

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Posted by bilou24an199
  

  Hello
  I hope someone here could help me
  I have a Mini click and I decided to install windows 10. First error
  During installation, I decided to replace the partition recory (2nd error)
  After the installation, I have observed that no update was possible, after 2 months, I decided to restore the system (3rd error)
  During the restore process in windows (only 71 percent) 10 = off work because of missing files
  So my Mini click is released
  I called 3 times to support (with no success) and this morning call center tell me to go to a special website to have a system restore USB
  PROBLEM = they ask me to pay for the key to restoration of toshiba
  I want only the files ISO and no way to have this file in the toshiba support site
  After 3 errors, click no way to recover my Mini, or only with money (even if my product is up to garranted! Amazing)
  And in the forum to write my message, my IE session was broken both times... Of course, I'm on the toshiba site and I use another toshiba satellite to write this message
  I think that my BBIIIIIIIGGG mistake was to buy a toshiba product...
  So if you can help me it will be good for me and for my budget... :-(

  Wow the GUY you described exactly the same problem as me...
  If anyone can help that would be great.

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• Satellite A100 - can not use Wifi after installing Win 7

  Hello

  I have a laptop Toshiba A100 of broadcasting.
  After 4 years of use, he was once hit by attack of virus and after detection, I got my laptop to format.
  and now, Windows 7 Home Premium has been installed (originally my OS is Windows Vista).
  Now I'm not able to use Wi - Fi.

  Please suggest me the procedure I need to follow in order to access wireless networks.

  My machine configurations are:
  1 GB of RAM
  HDD of 80 GB + 500 GB external support
  WINDOWS 7 Edition Home Premium
  1.6 GHz FREQ.

  Hello

  Have you installed the driver Wlan?
  The wireless network adapter is visible in device-> network cards Manager?
  Check it!

  In addition it s interesting to know if you are able to activate the WLan using FN + F8?
  If you will not be able to do so, you must install VAP (value added package) and Flash memory card Support utility.
  Check these two tools that have been published in Satellite L500 driver download area

• Satellite NB10-A-10V: unknown device after installing Win 7

  Hello forum,.

  I have installed Win7 in my brand-new NB10-A-10V.
  This was made possible thanks to BIOS 1.60.

  I can say that everything works OK and have found all the familiar features and behaviors provided by Win7.
  But the Win7 installation is not perfect yet; There is a missing driver, as reported by the Device Manager:

  * ! * Coding/decoding +(sorry my Win7 is the French version) PCI controller +.

  His ID is PCI VEN_8086 & DEV_0F1

  I do not know what is controlled here, since as I said I did not notice a problem with my NB10 or Win7.

  Can someone tell me what is this + controller +? And just for the sake of pleasing the Device Manager, can someone point me to the missing driver?

  All the best, Matitic

  According to the PCI database http://www.pcidatabase.com/ news
  The ID of FRI (seller) means 8086 and ID DEV (device) appears to be related to the chipset driver or USB driver

  Both are on the page of the Toshiba UE driver

• Satellite L655-S5107 - no battery detected after installing Win 8.1

  I have install windows 8.1 on my Toshiba Satellite L655-S5107, battery with an x? will appear in the description says "no battery is detected.

  Why is this happening? Do I need a driver or software?

  Hello

  Possible solution:

  Go to the device, made Manager right click and uninstall "microsoft compatible ac adapter".

  Then go to the action and the analysis of new hardware.

  The battery must be found.
  Sometimes an additional restart would be necessary.

• Satellite Pro A10 PSA15E: NO sound after installing Win XP

  Hello world

  I had to reinstall Win XP Home - which went well, however - now there is no sound and it says no audio device is installed. I tried to install the audio drivers on the Toshiba CD but they go as far as unpacking but then say "not installed" and Setup stops.

  I went to www. support. Toshiba.com and follow the menu to identify which drivers to download? but there are several possibilities for the
  Model A - 10 and I am not sure I have listed below models have.
  A10-S100, A10-S1001, A10-S127, A10-S128, A10-S129, A10-S1291, A10-S167, A10-S169, A10-S1691, A10 S177, A10-S178.

  I would be grateful for your advice.

  Thank you

  Andrew

  @mrafowler

  > I went to www. support. Toshiba.com and followed the menu in order to identify which drivers to download, but there are several possibilities for model A-10

  What you mean? On the European driver Toshiba page, you will find only one series Satellite Pro A10.
  Once again; Do you have a computer or a Sat Pro A10 laptop satellite A10?

  There is a driver of sound for a portable Pro A10. This is a version of audio driver Analog Devices 5.12.01.3542.
  If you are using XP SP2 please check the information provided on the page of the driver Tosh

• Satellite L305D-S5881: keys of Touchpad and FN do not work after installing Win 7

  I recently installed windows 7 and all of a sudden yesterday my touchpad does not work.

  I wasn't able to move my arrow of the mouse at all.
  I had to buy a wireless mouse that I can use my laptop.

  When I press the fn key more f9 that nothing happens to see if it is enabled or disabled.
  I have a satellite l305d-s5881

  Thanks for your help

  Hi mate

  Satellite L305D-S5881 belongs to the Toshiba US series and was released for the American market.
  You will need to visit the page of the Toshiba driver us in order to get all the drivers.

  To get the touchpad works, you need to install the driver for the Touchpad.
  In addition, the FN buttons are controlled by VAP (value added package) and Flash memory card Support utility.
  You must install both; all first PPV and then Flash cards.

  Here is the Toshiba page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Welcome them

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

  After Installing Win 7 on this CPU fan stop turning at all.

  Thus, when usage intensive pc shuts off due to the weather.

  I've been try bios update didn't etc no efect.

  Any idea?

  Hello

  It's very strange.
  Have you tried to reinstall Windows 7 again?
  I recommend you to repeat the installation of the OS!

  After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

  Last but not least go to BIOS (F2) and set it to default settings!
  Save the changes and exit the BIOS