Satellite A350-13 b cannot see all Wi - Fi networks

Similar Questions

• My Windows 7 PC cannot see themselves on the network.

  My Windows 7 PC cannot see themselves on the network. Under the heading network in Windows Explorer when I try to extend the C drive, I get an error message saying that Windows cannot access it. Also, I can't access this PC from a PC in 10 Windows on the same network - this error message indicates that Windows cannot communicate with the device or resource. It is available, but it is unresponsive to attempts to connect.

  I have tried turning the firewall off temporarily, but this makes no difference.

  Can access my PC Windows 7 Windows 10 PC and a laptop Windows 7 without any problem.

  Integrated network diagnostics do not come to the top with something useful.

  OT:

  Windows 7 networking

  Hello

  Thanks for posting your query in Microsoft Community.

  • Your computer is connected to the domain?

  There could be several reasons for this cause and to diagnose the problem, we can try the following steps and check.

  Step 1: Check if the network discovery is turned on.

  Please refer to: enable or disable network discovery

  Step 2: Check Event Viewer for detailed information on the problem. Consult the following links.

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Step 3: Search the computer browser service, if it is running.

  1. click on Start, type services.msc in the start search.

  2. search for the computer browser service.

  3. right click on the computer browser service and select Properties. Check if it is started.

  4. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  5. click apply and OK, if you make any changes.

  Step 4: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If you are able to connect, you may need to check for updates and firewall settings in the security software.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Disable the anti-virus software

  Step 5: Make sure that the name of the network working group is the same for all computers. Also try disabling some protected sharing and check for the issue.

  1. Open advanced sharing settings by clicking theStart button, thenControl Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2 click to expand the current network profile.

  3. by password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, try to perform a SFC scan to see if it solves the problem. Read the following article.

  Use the System File Checker tool to repair missing or corrupted system files

  Also refer to:

  Networking of computers running different versions of Windows

  Why can't I connect to other computers?

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• Cannot see all the specifications of customizaton... why?

  We have two vCenters in bound mode. If I create a virtual computer on a site and you choose to use a specification of previous customization that I see about 1/2 of the plug. If I do the same thing to the other site I get about the other 1/2 (give or take). I built a new virtual machine in my second site, thinking that if I taped the first site would see it. Well, I don't see it at all in my technical customization Manager.

  Any ideas on that?

  HI, oops I meant to edit and say that I figured this out. Even if two vCenters are in bound mode, it seems that the models cannot see card customization of their respective vCenters. I created a similar technique on my other vCenter and was able to see it!

• Satellite L655 - DVD Player cannot not all data on a disk

  Hello

  My Toshiba Satellite L655 psk1je (1ek) cannot write any disk. Why?
  Please help me

  Hello

  Can you please us the discs you are trying to use, what software of engraving that you use and what type of disc you are trying to create? Just to simply burn data to disc empty?

• How can I get my hotmail back to normal the txt page is really very important and cannot see all my emails

  Hi my email acc page is huge writing is so great, I don't see all of my messages or email how do I get it back to normal

  Forum hotmail here

• 3rd generation Apple TV stopped seeing all wi - fi networks.

  3rd generation Apple TV suddenly stopped to see Wi - Fi.  I bought an Apple TV 3rd generation (stupidly) shortly before the 4th generation came out.  But it works fine for the short time I've had it.  However, I moved it to a larger TV this weekend so we could use the new HBO subscription now (and look at the vinyl with a bigger screen and better speakers) and he would suddenly see a wi - fi network.  Then I brought it back to the original location and it will not always see the networks.  It's almost like unplug it killed, but that can't be true! What is going on?  I tried to plug it into my new laptop running latest everything, with a mini-usb cable, but iTunes doesn't recognize.  The white light at the front of the Apple TV flashes quickly.  I think it would still be on the one year warranty, but I can't find my receipt.  However, it looks more like something weird network.  My modem comcast/xfinity wi - fi still works with all other devices in the House. iPhones, iPads, computers laptops. I don't want to buy a new one.  It then he darn, it should still work.  This happened to someone else?  Thank you.

  If the white light flashes quickly then you need to restore via iTunes

  Mmake sure that you follow the delicate steps (disconnect all cables, connect the USB microphone, plug). Connect directly to the computer, try another USB microphone cable (make sure it is capable of data transfer, if it has been delivered with another device, then it can be scheduled for the device)

• PC can ping but cannot see themselves in my network places

  I have a network with several client computers running Windows XP with a network disk server. They could see themselves in my network places and access to shared content until we changed Internet provider. Since this moment PC is not mutually exclusive in My Network places.

  I have searched for the solution, including Microsoft Answers and tried many solutions for this or similar problem but have failed in this case.

  That's what I've tried so far.

  I checked the properties of the network adapter and the following features are enabled: Client for Microsoft Networks, file sharing and print.

  All PCs have the Windows Firewall and 'File and Print sharing' is in expectations, which means that the ports 135 139 are open and in addition, it means that the computer browser service is activated automatically.

  I tried the two NetBIOS Over TCP/IP and the default options (settings use NetBIOS on the DHCP server).

  On the PC, there are shared content with read and write permissions.

  It implies that all PCs are in the same workgroup.

  What should I do next to get that this corrected? Or what should review again?

  Thank you in advance.

  I have just one more question. Why is it important to have ports 137-139 are open on the router if it is a local traffic (Layer 2)?

  That is a good question.  Everything worked fine until the router has been changed, you are not double natting and all machines are getting the router DHCP addresses (no static address on any of the workstations) so we can pretty much eliminate the errors of subnetting or navigation on subnets as a possible cause.  The only thing that has changed is the router, nothing has changed on the desktop, so I can't believe that the router is blocking NetBIOS local, I don't know where the problem would be a lie.  If you still have the old router connect machines in it and see if things are working properly.  But you're right, you wouldn't open the NetBIOS ports to the external network, I just think that something in the router is blocking NetBIOS.

  With regard to the Master Browser, General guidelines:

  • Make sure that all the machines are on the same subnet and same (correct) subnet mask.  NetBIOS can navigate across subnets without additional hardware or without a WINS server.  If all the machines are on the same subnet, but if the subnet mask is not properly configured the master browser may not work correctly.   These steps here are not usually a problem when all the machines are configured to obtain their IP addresses automatically and you have a router handling DHCP, if you assign static addresses do not neglect this important notice.
  • Select which machine will act as a preferred master browser and who can act as potential explorers, ensure that any machine not chosen to act as one of the above does not participate in the elections "browser."  Assigns the functions of master browser favorite to a machine that is always and usually always on, functions of "Potential Browser", a machine which is also usually under tension, a machine that can take charge if the favorite computer is not enabled.  DISABLE the master browser on all other machines, a machine is rarely turned on is a bad candidate for duties of master browser and can just cause of 'browser war '.

  Disabling the computer browser service will indeed prevent a machine to participate in the elections of browser and become a master browser, but the proper way to disable the master browser is by defining the IsDomainMaster 'False' value and the MaintainServerList value to 'No' to the key HKLM\SYSTEM\CurrentControlSet\services\Browser\Parameters.

  On the preferred Master browser set the IsDomainMaster value 'True' and the 'Yes' MaintainServerList to.  On the potential browser set the IsDomainMaster 'False' value and worth MaintainServerList on 'Auto '.  Unless the computer is configured as the preferred master browser, the value of the IsDomainMaster entry still has the value False or No .

  But then, everything worked fine before the change in router, it stopped working after the new router was introduced into the network, so I don't see how the master browser settings have changed, everything seems to be pointing the router again.  Have you looked at the event journal relevant errors?

  I think that the ISP routers are fine for limited use, but otherwise I don't really like the networks handling small office/work, I always prefer to have ones own router and placing the ISP router mode bridge, this way he usually is the least disruption possible to the network job when dealing with questions of the ISP.

  John

• Satellite P300 and Win7 - cannot see wireless networks

  Hello

  I have Toshiba Satellite with Win7x64 and I bought on eBay an AR5008.

  If I boot Linux I can connect to wireless networks.
  However if I boot in win7 that I can't even see wireless networks. If I run diagnostics I get the radio is turned off.
  Even with ConfigFree I get the same message, even if the switch on the front of the laptop is on.

  What can I do? I tried all the drivers!

  Hello

  Normally, you can enable or disable the WLAN connectivity by using the equipment and the FN + F8 key combination switch.
  Did you check that?

  I guess for the FN + F8 key combination you need value-added package. You can download it on the Toshiba site.

  Last but not least, works WLAN with preinstalled OS from Toshiba?

• ASA VPN connection cannot see all subnets

  I'm new to the ASA and I have a problem with our remote users. When people access vpn, they don't see a couple subnets on the network. I looked at the ASA and he can see and communicate with subnets, but when you vpn in them is not reachable. All these connections are connections from admin to admin privlages. Anyone know why the ASA can see subnets, but the admin vpn users cannot?

  You compare your ACL split tunnel and your table routing, but only for networks that are relevant to you and you must have access to and are not outside the old configuration. You should also ensure that these networks can route traffic from the pool of vpn.

• Master Pro XP and XP Home Slave - cannot see all files on the slave

  Hi all

  I had an old Dell Dimension, who dies, who was running XP Home. so, I removed the old hard drive and installed as a "slave" drive in a second Dimension of Dell running XP Pro. The system XP Pro recognized and installed the old XP Home hard drive as a slave with no problems. I can see a variety of directories and files on the drive slave (even the Windows directories and program); However, I don't see the 'Documents and Settings' from the old system. And of course, that's where all the data I want to access to lies. When I look at the two drives under "my computer" (XP Pro System), the (s) 'total size' and 'free space' seems correct; So, it seems that the data is there. I can't do it.
  You can provide any help will be greatly appreciated, thank you.
  Reed
  (* E-mail address is removed from the privacy *)

  No idea if it will work, but make sure that hidden files are able to see, you can also try to go to start and run and type something like "d:\documents and settings" replacing the d: with your other drive, but keep the quotation marks :D

• Cannot see all files on external drives (external HARD drive / flashdrives)

  I do not see any folder on my external hard drive, I know that these files exist because it still shows how the same amount of space remaining left on this drive. Is the same for all flashdrives I plug it into my laptop

  Edit * directories to the folders still exist, I can access when I type in my address bar, but I can't see the icon to click on it.

     

  Hello

  Windows 7 sometimes has trouble seeing external drives. Found one potential than me and other solution is to download and install the freeware Aomei Partition Assistant application, download it here: http://download.cnet.com/AOMEI-Partition-Assistant-Standard-Edition/3000-18512_4-75118871.html?tag=mncol;1 (only use the Direct download link).

  Once installed, go to the readers in question and one both select and select Properties. It is her, no formatting or partitioning required. Just select the drive is often enough to get Windows 7 to recognize.

  Post your results here and let me know how you fare.

  Kind regards

  BearPup

• Most of the games will not load and cannot see all the options.

  Original title: installation of Command and Conquer 'the first decade.

  Hello

  I recently installed first decade on my laptop running windows 7 64 bit. I can load the screen perfectly, but most of the games, I can not load except red alert 2 and even in this case I don't see any options. The only way I can see them is by pressing alt + Tab to go to my office then flow back into the game, but I think it's to do with the size of the screen, but I'm not sure. Other games work not at all except the storm and Tiberian Sun. These don't work if I click them restart the entire computer and load the game up and go straight to him.

  Whenever I click on other games, red alert bar 2, it asks me to insert the correct disc which is of course already in the machine

  Hello

  Did you try to update the graphics card for Acer drivers and install updates?

• vCenter 5.5 device - cannot see all users/groups of ads after you configure SINGLE sign-on

  I'm playing with the device of vCenter 5.5 (studying if it is possible to move the device to Windows hosted vCenter).  We are running 5.0 vCenter, so I have no experience with SSO to date.  I've joined with success the vCenter for AD unit (I can see the object in AD) and then I added our field as a source-SSO in vCenter.  I made sure to use a host name COMPLETE of the device that I've seen a few problems with join the domain if the hostname was not in FQDN format.  When I set up SSO, I used "Active Directory (Integrated Windows Authentication)," and then "use machine account" - which, from what I understand, all that is necessary is that I joined the field of unit - which, as I said, seems joining our field.  When I added the SSO domain, there is no errors and I now see in the list.  So as far as I know, the configuration for the SSO was entirely free of errors.

  However, when I try to add resources to AD to vCenter (for example to add ad users/groups to the vCenter administrators group or assign role permissions to objects in vCenter) navigation for our domain window just, hangs in the web interface, I see a little blue bar progress turns forever and in the Windows GUI for vSphere client the browser window just hangs and I have to kill the process.

  I missed a critical step in the configuration of SSO for AD?  I'm not supposed to use "computer account"?

  Any help is appreciated.

  NK

  I had the same problem as you and and the fixed by adding a PTR DNS for a Windows domain controller in DNS. I came across a VMware troubleshooting document (not exactly the same problem, I had) and I gave it a try and it solved my problem.

  Documentation Centre of vSphere 5.5

• DROP USER CASCADE takes forever! Cannot see all blocks... any ideas?

  Hi all
  
  I am running a script that has a cascade of user to fall, and it's been sitting there for about 3.5 hours at this point.
  
  I ran a query to see if I could find any blocking sessions:
  
  SQL > alter
  A written file afiedt.buf
  
  1 SELECT DECODE (ask, 0,' the owner: ',' server: '). Sess sid,
  2 id1, id2, lmode, request, type
  3. IN V$ LOCK
  4. WHERE (id1, id2, type) IN
  5 (SELECT id1, id2, type OF LOCKING WHEN demand for V$ > 0)
  6 * ORDER BY id1, ask
  SQL > /.
  
  no selected line
  
  
  So, I'm a bit stuck... is possible to see what maybe continues this? This is performed on a 3 x system RAC node... I think this would go pretty fast...
  
  any ideas on what to do or what to watch?
  
  TIA,
  
  Cayenne

  Yes, you drop the first user objects, then delete it the user. Slow user drops have been written about many times over the years. It generally works better if you don't try to do everything via a single command.

  I had the same experience with drop tablespace waterfall. It is generally faster remove objects via the script, then drop the tablespace.

  For now, you want to probably just wait the drop user cascade.

  HTH - Mark D Powell.