Satellite A500-13W - after update BIOS the FN buttons do not work

Similar Questions

• Satellite U500 - 11 c - after updating Win7, the eco button no longer works

  Hello

  Recently I upgraded my OS from Win Vista 32 bit to Win 7 32 bit with the TOSHIBA DVD and since then, the eco button no longer works.

  When I press on it, the laptop is not set the eco mode.

  Does anyone have the solution for that, please?

  Hello

  I'm a little confused about your ad m...
  You wrote this eco mode works well but if you press the button it doesn t switch?

  However, as the written Timox try reinstalling the Eco utility * and * value-added package. The two you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite L650: Created new Image but the FN buttons do not work

  In the past, I created the image of my good installation with all updates and my installed programs.
  After that once again L650 began to play up, I rebooted it and now my fn keys do not work and Health monitor does not start, but displays an error message "unable to get the type of bios.

  Don't know what else does not work here.
  RELOADED according to factory instructions and everything is OK, but now I have to reinstall my programs and updates.
  What a pain. Anyone know why "my image" has problems?

  This machine had 2 hard drives replaced, has graphic problems with some 3d foot crossings and freezes at the first chance with the mouse not working not and then the black screen. Still under guarantee.
  What nonsense.

  I'll charge as directed by the plant and see when it will pack up again so I can get it repair.
  Unfortunately, problems are random and difficult to prove.
  This is computer/laptop worst I've ever had - very disappointed.

  Hello

  Fn keys are controlled by VAP and Flash memory card Support utility.

  In most cases, it allows to restart Flash Cards Support Utility tool.

  You can find it in the * all programs-> Toshiba-> restart Flash Card Support *.

  If this does not work, a reinstallation of VAP and Flash memory card Support utility should work

  Welcome them

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• Satellite U500 - the volume buttons do not work

  Hello

  I just bought a Toshiba Satellite U500 two days ago and already problems :(

  It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
  The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

  Help, please. Is it possible to re-install the drivers?
  The only solution I found is to disable them using HWSetup...

  Great news. Thanks for the comments!

• Portege M750 and Win8.1 Pro - the tablet buttons do not work

  Hello

  I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

  In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

  I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

  > I don't know that I have installed all the drivers who wverything work with Windows 8

  Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

  As much as I know the Toshiba can't win on this Portege M750 8.1.
  This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

  You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

  So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

• Documents on the right panel of the Start button may not work?

  Documents on the right panel of the Start button may not work?
  Right click show properties, Blank? Previously ok when click on it goes in the document folder.

  Hello

  1 did you change on your computer?

  2. What happen exactly when you open documents?

  3. are you able to Documents to another location for example the windows Explorer folder?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you send the screenshot of the windows properties document...

  Provide this link to screenshot

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• Download in the market button does not work!

  Download in the market button does not work! No download by clicking the download button. Enough storage + reboots.

  I just restarted my computer and now I can download.

  Thank you!

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• After running root.sh OK button does not work. A closed the session without the last step

  I have finished running root.sh during runInstaller 11.2.0.3 Installation of the grid, but the ok button will not click, I waited and expected and clicked again once, it will not simply move.

  So finally this session has sold out.

  I want to know should uninstall everything and do a reinstall?  or Installation of the grid constitutes success?

  Thanks in advance.

  your node VIP don't is not online... looks like there was a problem to run the root.sh?

  try to restart both servers and see if the VIP launched automatically. Also, be sure that the VIP are on the same network as the client ips and have similar netmask.

• lock the mouse button does not work

  It worked fine until a few weeks ago.  Now, I need to left-click while using the touch of the finger. I'm going to: mouse properties, buttons, lock, turn on click-lock and ok.  It does not help.  Thank you.

  Hello

  1 did you change on your computer?

  2. What is the brand and model of the computer?

  3. I suggest you perform the clean boot and check.

  Method 1:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to update mouse drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings