Satellite A500 - Webcam 10 Windows and drivers of the Fn keys

Similar Questions

• Re: Satellite A500-14F (PSAM3E) Windows 7 drivers

  Hi all
  I have a Satellite A500-14F (PSAM3E) and I would like to install Windows 7, but I saw on the site of drivers in the European Union for Portege. By any chance does anyone know where when Win7 drivers for all other portable eligible will be published?

  Best regards

  I don't think anyone here can say with certainty when the drivers will be released but the list of models of laptops, which you will find under
  http://APS2.toshiba-tro.de/KB0/TSB9902P50000R01.htm

• Satellite A500 - 18Q - screen freezes and BSOD appears the screen

  I bought my computer 3 weeks ago and I have a problem.
  My computer froze or displays the blue screen. It happens randomly, without having to open any program.

  Sometimes half an hour or an hour later as I start my computer or nothing happens.
  I have windows 7 home.

  I need help

  Hmm BSODS can happen thanks to a software or hardware problem and therefore it is difficult to say what could cause this.
  The A500 seems to be a new model of laptop and I doubt that the dust could be the reason for the temperature more high which could cause the BSOD.
  However, you should check if the cooling modules are free of dust and it might be useful to clean using the can of compressed air.

  In addition, you should check if your BIOS is up to date.
  If this isn't the case,-> to update this!

  Welcome them

• Satellite P200D - restoration of Windows and backup of the data on C:

  A recent hardware/software error leads to the error status: 0xc000000f

  If I understand correctly F8 takes me to the recovery of HARD drive mirrored on D: with the option to restore Windows.

  Is it possible to save/save files on C: when you have to resort to that?

  All data on D: is likely safe?

  The problem arose after picking up the malware Windows Vista Total Security package which has led to a closed system (blue screen) before I could restore Vista to its previous state, and while I was running the AV software to see if she could remove this malware.

  When you start installation of recovery of HARD drive will be formatted partition C any and recovery image installed. What you need to do is to save all your important data from C to an external device or simply delete on the D partition.

  All data saved on D will be there. Image recovery disc HARD will not format partition D.

• Satellite U500 - 1 DR - 2 and 3 of the SHIFT key Shift key

  Is there a possible solution to this problem when you press the BUTTON SHIFT 2, which is the (@) symbol display in the display with the symbol ("") and also, the KEY SHIFT 3 symbolize (hash) the display with the symbol (£).

  There was error in manufacturing or put in place error.

  Have you tried the English value (United States) in the language and keyboard settings?

• Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers

  Hello

  My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP before changing my HARD drive + tips on replacing drive HARD would be also useful. There is no service HP here so I have to do it myself.

  Thank you, I finally solved the problem by creating a partition under Advanced options and recovery of Windows drive, and you select Reset. Search for main windows and use Windows system image did not work with the version of Windows OEM.

• Satellite A500 - 1 GB - copy dialog crashes on the eSATA connection

  Hello

  I have trouble when using my Samsung storyboard (1.5 TB, eSata/USB 2.0) with the Satellite A500 - 1 GB (Windows 7 64-bit):

  (a) when you use the connector eSata (preferred):
  The drive is recognized by the system, and I can read the directory information. But I cannot copy or play the disc. The copy dialog box freezes quickly and cannot be terminated easily.

  (b) when you use the USB connector:
  It is also recognized by the system, but copy and read operations take ages - I have tried to make a backup of the system, but cancelled after 5 hours.

  The drive works fine with another PC (also Windows 7 x 64), so the drive itself should be ok.

  I've updated satellite drivers today (BIOS, chipset and responsible storage), but this did not improve the situation at all.

  The question is probably, due to the 150 versus Protocol SATA 300 SATA? A500 - 1 GB does support SATA 300 (SATA 2) or just SATA 150 (1 SATA)? Is there a specific SATA driver (Intel?) I might give a try? Where could I check who is currently SATA-used protocol?

  Or do you have other clues on how I could solve this problem?

  Best regards
  Waschlappen

  Hello

  Theoretically, your external hard drive eSATA connection could be defective so have you tested the USB connection only on your other PC or eSATA too?
  In addition, you should test another cable, I had a USB cable, did the same problem and after Exchange of cable, everything was ok.

  There is no special driver for it on the eSATA connection. I think that it s part of the chipset driver for reinstall the chipset driver could also be helpful.

• Satellite A500 PSAR9E. Someone tryied to install the SSD to conn JSSD?

  Hello!

  Now my satellite A500 is completely disassembled and I am looking for what is inside and what is possible to upgrade. The most interesting for me is jssd connector on the bottom of the motherboard.

  This information was already mentioned on toshiba American forum but has not ended.
  It's someone who's been tryied/successedid to install the ssd drive to this place or this connection is physically disabled by the BIOS of the motherboard?

  And including this interface mSATA 1.8 inches?

  I myself want to try this connection if I find this ssd or the usual sata interface cable.

  If the micro SATA port is available on the motherboard, the interface should work.
  But there is a question open about the BIOS. If the BIOS would not provide support for the micro SATA, then new SSD connected would be not recognized
  However, I have not found useful information on BIOS support...

• I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key

  I have toshiba laptop and I have the product key and I do not know what windows is I can find it with the product key or any body help, I can't use it

  You must order a set of recovery disc for the computer from the manufacturer - this will install the appropriate drivers for your system automatically, as well as packaged applications.

  If you have not formatted the disk (or replaced) existing partition recovery may still be present - see your manual for details.

  It is possible to download Vista - see here for more details - http://www.heidoc.net/joomla/technology-science/microsoft/57-windows-vista-direct-download-links -, but note that it is not a simple process!

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• where can I get windows 7 drivers for the printer, TallyGenicom T9312 Laser stepped

  where can I get windows 7 drivers for the printer, TallyGenicom T9312 Laser stepped

  http://www.tally.com/service/default.aspx?ID=6397

  service and support page, you can send the manufacturer here on your drivers,

  I searched through the site, but is not a list, it is possible that XP is as high as it goes for compatibility.

• I am trying to update Windows and I get the 0x080072F8F error code

  I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

  How many copies of Windows that you downloaded?

  First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

  Follow the steps below to solve the problem;

  
  Method 1: Verify that your Internet connection is working

  This method is rated: moderately easy.

  To run this method, follow these steps:

  (a) click Start and then click Help and Support.
  (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
  (c) in the list of topics, click on solve the network and Internet connection problems.
  (d) click the link that best describes the problem you are experiencing.
  (e) follow the suggestions to solve the problem you are experiencing.
  (f) when you are done, follow the steps in method B to reactivate Windows 7.

  If this method does not work for you, go to method 2.

  
  Method 2: Activate Windows 7 using the automated telephone system

  This method is rated: easy.

  To run this method, follow these steps:

  (a) click Start, and then click computer.
  (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
  (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (d) click on show me other ways to activate.
  (e) click on use the automated telephone and then follow the instructions that are provided.

  
  Method 3:

  Reset your TCP/IP stack

  (a) click Start

  (b) type in the box search command

  (c) right click command and select run as administrator

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

• While trying to install windows xp on my computer, it displays the search for previous versions of windows and then locks the system.

  XP installation problem

  while trying to install windows xp on my computer (processor i3), she shows looking for previous versions of windows and then crashes the system. So please give me a solution

  Hi deva_reddy,

  Looks like you are trying to do a repair of windows xp installation.

  You use a windows installation cd?

  Refer to the link below for the procedure to install windows XP using different methods.

  http://support.Microsoft.com/kb/978307

  Hope the helpfu.

• I got a refurbished PC includes a CD of Windows XP SP3, I want to use it to install windows in the other computer and I need the product key.

  I got a refurbished pc includes a CD of windows XP SP3, I want to use it to install windows in the other computer and I need the product key.

  SP3 for xp is not the operating system, only of SP3.

  To buy a cd of xp, with key retail product #.

  Without this, you cannot install xp.

• I ave a serial number of Windows Vista sp2 and I need the product key

  I ave a serial number of Windows Vista sp2 and I need the product key

  Unfortunately, the "serial number" can be used to obtain a product key.  Please see: How to replace Microsoft software.