HP 15 f337wm: 15 Hp f337wm memory update

Similar Questions

• Satellite Pro R50-B-12U and memory update

  Hello

  I have a Satellite Pro R50-B-12u with 4 GB of RAM.
  I bought a 4 GB of additional RAM stick but can not see how adapt you it.

  My last Satellite Pro had a memory of flap at the back, but everything I see on the back is about 20 screws but no flap!

  Can someone please help me or point me in the right direction?

  Thank you in advance.

  TIF

  Hello

  Satellite R50 does not separate memory Bay.
  The memory modules and slots are hidden under the hood.

  To have access to modules, the cover must be removed.
  But I wouldn't recommend doing this because it would negate the warranty!

  I guess that your warranty is still valid and in this case only the authorized technician must perform these updates to keep the warranty valid.

• HP dc 7900 sff memory update

  Hello, this week the team here helped me to update my BIOS for my Compaq HP DC 7900 SFF. I have four available memory slots, and the computer's specifications say that it can have a total of 16 GB of memory. I could not find the specifications of the type of memory should I use.

  Can anyone here point me in the right direction for a memory upgrade?

  Thank you in advance,

  Peace,

  Mark

  Thank you as always, I paid 90 million dollars for the dc 7900 with 4 GB of ram, burner light scribe, two core 8400 processor. 250 GB hard drive, only really bad thing is that each of the modules 4 memory are a different speed, and it comes up as unknown. I think that this computer can only run as fast as the module of memory of slowese. I'll probably get 4 GB memory and keep it for now, it works great and I like it better than my gateway 560 Gr. I am running windows 7 ultra 64-bit. and I'm happy. I think that if I change the memory, it will peform better year and the next update to the hp 8200. They go for about $300 used on e - bay, and hp/compaq has always been my brand.

• HP Envy Touchsmart Sleekbook 4: HP Envy Touchsmart Sleekbook 4 memory update will see 16 GB of RAM

  I purc hased and installed 16 GB of RAM in both slots of memory available. Only 8 GB is visible (updated 4 GB). The HP Envy Sleekbook Maintenance and Service Guide HP Envy TouchSmart c03599931.pdf says on page 2 that the system supports 16 GB of RAM. When I go into the BIOS Setup, I can not change the amount of memory, which only shows 8 GB. How can I see all the 16GB?

  BIOS options are not editable, for those who do not help. I did remove the lower cover, reinstall the DIMM modules, and that seems to have solved the problem. Thank you!

• Dell Optiplex 780 memory update does not

  1. I have purchase Dell Optiplex 780 supplied with memory DDR3 8 GB (4x2Go). I wanted to update so I bought 4 GB RAM (4x1Go) and tried to install it today. The diagnostic lights Dell on 3 and 4, which means that the memory is detected, but at fault. Now, I doubt that this new module of memory are defective. Here's what I did to solve problems:

     I took the original strips and installed a new. There are 4 DIMM and I tried to put it in all the 4 connectors DIMM one, but my PC will not start and shows the Dell diagnostic lights lit 3 and 4. then I put my original RAMS but still the same problem has happened that I also tried the two Rams Original one by one in all the slots but same question :(

     I also tried without installed memory but still Dell lights lit diagnostic 3 and 4 and no beep heard.

     Can someone help me what is the problem real?

  Hi Danish_smartpk,

  Welcome to the Dell Community Forum.

  If the 3 and 4 diagnostic lights are lit, it is code modules of memory detected, but a memory failure that occurred. You also mentioned that there is not only no beeps no heard when no memory is installed. When no memory is detected by the system, it emits beep codes indicating the same.  If the motherboard is not beep when no memory is installed, it could indicate failure systemboard.

  It is generally recommended that the BIOS updated before the new memory being installed. In addition, your computer supports a maximum of 8 GB of RAM DDR3 SDRAM (memory non - ECC only). If it already came with 8 GB of memory, it would not take an additional upgrade.

  If the system is under warranty, contact me with a message private by clicking on my name highlighted in blue. On the next page, click on the envelope icon and provide your service and coordinates (as mentioned below) so that I can access your system folders.

  • System Service Tag No.:
  • Name of the registered owner system:
  • Shipping address:
  • Number of phone/s:
  • E-mail address:

  However, if the system is out of warranty, you can contact a local technician for assistance to the replacement of the motherboard or contact our warranty Support has expired on the link below:

  http://Dell.to/12LmNBq

  Please do not hesitate to contact us in case of other queries.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit ourSupport Site .

• iMac RAM memory update

  Hello!

  I have an iMac 27 "(mid 2011) with four memory RAM locations." Two locations are the original memory of 2 GB (4 GB total). Now, I bought two 4 GB memory. Can I put these new memories in the free slots, or do I have to remove first the 'old' and put new ones in place? The 'old' works with the new?

  Simply put the new ram in the empty slots. There is no advantage to win by moving the ram of origin.

• Memory update by Satellite L300-1 has 3

  I have a L300-1 to 3 with 4 GB of Ram. Running Windows 7 Ultimate 64-bit Edition. I would like to know if I can improve memory in modules of 2 x 4 GB?
  Colin

  Hello

  You can use 4 GB RAM max. This means that you can use the memory 2 x 2 GB DDR2 (800 MHz) RAM modules.

  Welcome them

• After the memory update satellite L20-206 shows only 1 GB

  Hello, could someone tell me:
  Ive had 2 modules of 512 RAM (Samsung) & 256 Hynix. After that I decided to install 1024 Mb (Crucial (Micron), Bios, and OS doest see 256 MB module - 1024 MB only.

  The same photo that I install 1024 MB + 512 MB. I already flashed with the new Bios - it did not help.
  But the utillity CPU - Z in Windows recongnizes modules 2 in both cases?

  P.S. Should I install the same module as my Crucial (Micron) or my laptop supports no more than 1 GB?

  Now, using a 1024 module, well enough, but maybe in the future, I would like to have more.

  Well, it's very strange because the L20-206 could be upgraded to 2 GB max memory!
  In this case, you can use the modules of memory 2x1024Mo!

  The laptop should recognize two modules installed! But maybe the two modules aren't compatible? In any case, I advise to use the same modules with the same specifications.
  I found a few modules recommended by Toshiba. So maybe you want to use these:
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite A210 - 10 c memory update

  I have a Toshiba Satellite A210 - 10 c that uses memorys PC2-5300 DDR2 667 MHz SODIMM. right?

  I wonder if I can put the Samsung PC2-5300 DDR2 - 667 MHz memory that I take a laptop another on my Toshiba. His trunk? or not good idea?

  I hope someone can give me an abou this ;)

  Thks

  Why shouldn´t would be a good idea? I mean if your machine needs DIMM PC2-5300 and you have a few available doesn´t then there is a problem. It is important to doesn´t if you take the memory from another machine.

  If the memory of another machine works and you feel familiar to Exchange then do.

  That's all.

  Welcome them

• HP dv6500 memory update

  Hello

  I currently have 2 GB (1GBx2) memory in my hp dv6500. I'm looking to upgrade to 4 GB (2GBx2).

  According to http://www.memorystock.com/memory/HewlettPackardPavilionDV6500.html, there are two possible options:

  The '2048 MB800 MHz DDR2-800 PC2-6400, SODIMM 200 p, 1.8V"(underlining) and the" "2048 MB667 MHz DDR2-667 PC2-5300, SODIMM 200 p, 1.8V"»

  I'm sure that memory, I have now is at 667 MHz and it's what my current processor will support. However, I plan to upgrade my CPU to the T5900, which will help to 800 MHz. My question is, I can use the memory at 800 MHz, or I have to use memory 667 MHz? I could not find information on my motherboard...

  Hello:

  I would like to get the memory at 800 MHz, but it doesn't matter, as the mobile Intel 965 chipset in your laptop will only work the memory at 667 MHz regardless the speed of the FSB processors.

  A little known fact, but it is what it is.

  The desktop version of the chipset Intel 965 runs at 800 MHz memory.

• Acer Aspire X 3300 memory update

  I got my Acer Aspire X 3300 equipped of 2 X 2 GB PC3-10600 DDR3-1333 Ram type, can I switch type Ram DDR3-1600 PC3-12800? 4 GB? can I put the PC to more than 8 GB of RAM? Any help or answers are appreciated, thank you.

  laurent_14 wrote:

  Hello

  Each memory slot supports up to 2 GB maximum 4x2Gb Yes.

  -Why do you want to buy DDR3 - 1600 MHz?

  You can find real brand and the the part number of your modules with HWINFO portable version (without installation).

  Its give me free as a gift, isn't useless now, thanks for the help, congratulations on the left to thank you.

• HP Pavilion dv6000 series (RAM) memory update

  Hey there!

  My laptop has currently 1 GB memory (RAM), and I would like to improve his memory to 2 GB +. Is it still possible?

  OS: Windows XP

  Model number: dv6725ee

  Thanks in advance!

  Hello:

  This is the page for specifications of product for your laptop.

  http://support.HP.com/US-en/document/c01326393=

  You can install 2 x 2 GB (4 GB) memory PC2-6400 in your machine.

• HP Mini 210-3000sd: HP Mini 210-3000 memory update

  I bought a HP Mini 210-3000sd, or LT963EA #ABH used. It came with 1 GB of memory, which is great for Linux with a small desktop computer, but most certainly is preferable. I think to upgrade the memory, but am a bit confused:

  According to the product page.
  http://support.HP.com/nl-NL/product/HP-mini-210-3000-PC-series/5082191/model/5116173/document/c02904... 1 GB is the maximum amount of memory.

  After Crucial, they have a module for 2 GB of RAM for this laptop, only they call cell 210-3000CTO and their recommended module has a non standard of 1.35v rather voltage of 1, 5V.

  The maintenance manual mentions single-channel 2GB DDR3 - 1333 MHz, no mention of any particular tension, but they list a number of spare parts 621565-001, which I couldn't find in the HP store, and he otherwise would be probably much more expensive than elsewhere.

  Can someone give me more specific information, that is, the memory is expandable and if so, should it be 1.35v?

  I got the memory today. Replace the memory module was quick and easy. Now the Starter Edition of Windows and Linux see 2 GB, and everything starts much more quickly.

• HP Split 13-g210dx x 2 memory update

  I bought the laptop hybrid of Split HP 13-g210dx x 2 and I love it.  I did a lot of research but can't seem to find the right way to improve memory.  I know that this particiular model is able to take 8 GB.  Can someone give me some advice on where to go to find a way to do it.

  Thank you

  Chad

  Go through the Page 64, 65 of the manual here:
  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&EI=SIjiU_y3MMacugSC1oKQBQ&URL=http :// www.hp.com/ctg/Manual/c04273417.pdf&cd=1&ved=0CBoQFjAA&usg=AFQjCNHu3WB6wOqETZ-attGaCs36umS-8w

  It is provided with the replacement of the system board.

• HP Mini 210-1121ej 2 GB memory update

  The HP service center and dealer can provide 2 GB of RAM that works.  Tried service center and the laptop hooked - they ordered a new motherboard and got the same answer.  Auditor memory online memory crucial responds "not available" and others don't recognize yet model number 210-1121ej (even if HP Support Assistant confirms that it is correct).

  Nice design, nice blue color but don't try to run more Windows 7 and Internet Explorer/Firefox.  Microsoft Word 2010 is too ask that much for 1 Gb RAM standard - just goes to sleep.

  All work beautifully - can run Firefox, MS Office 2010 Word & Outlook and Skype and camcorder running smooth.

  Finally found HP Support Assistant, who knew the correct details - HP part # 613857-351 2 GB RAM

  Manufacturer:

  (1) HMT325S6BFR8C-H9N0