Satellite A500 - 18Q - screen freezes and BSOD appears the screen

Similar Questions

• Satellite A500 - Webcam 10 Windows and drivers of the Fn keys

  Hello

  I obtained through Satellite A500.

  After the upgrade to Windows 10 Webcam and Fn keys do not work.

  Where can I find driver updates?

  Thanks for the reply.

  Where can I find driver updates?

  Unfortunately, it seems that the Satellite A500 is too old and will not be Windows 10 drivers.
  I found the Toshiba site, which provides information on the Toshiba models supported for upgrading to Windows 10 and the A500 is not which are listed there.
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Generally, all Toshiba drivers earn 10 for other models of laptops can be downloaded on this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG
  then maybe you can see the drivers released for other series...

  I also read that some of the riders Win 8 could also work in the frame to win 10.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Satellite L200: Why LCD freezes and lines to the LCD display displayed during charging?

  Hello!

  I'm new here and Ive had some problems with my L200. Whenever I charge my phone while using my LCD monitor freezes and there is a bit of running lines that appear in the monitor.
  The only way I can use it is to unplug the charger and run it through the use of a fully charged battery.

  I just want to ask if theres a problem with my LCD or with the charger adapter?
  Thank you very much!

  I am not a technician, but I fear that there is a problem with the electronic board.

  Since when did you notice this behavior?

• Satellite A500 - 1 Win7 64 bit - BSOD appears - jmcr.sys crashes

  Probably, you will think:
  Once again someone with the jmcr.sys thing and probably you are already typing, telling me that I should update my drivers

  All my drivers are updated (according to toshiba service station)
  * I have updated my bios and driver of jmcr repeatedly *.
  the last time yesterday

  and in the last 20 minutes, I had 4 bluescreens
  I am happy that I can write these lines at the present time without getting a blue screen
  I already receive the bluescreens months... sometimes a few weeks without any problems and then it crashes several times a day again

  accidents happen randomly, for example while I browse on the internet, or even just after the restart
  with power supply and without

  ATM, I can't find the card reader in the hardware Manager more (yesterday it was there, after you have reinstalled the driver)

  I hope someone can give me a helpful answer and I don't think that it would be useful to reinstall the drivers for the 5th time

  the other problem:
  * from time to time my sound starts to jitter * (is that the correct English term?)
  as if there are a few milliseconds of silence or lag every few seconds
  This is the case in different music (wmp, vlc) players and different titles (legally downloaded and often played without any problems)... I tried the same thing with the songs of youtube or all sounds
  occurs by using the speakers of my laptop, as well as external speakers

  If you need more information ask: P

  I hope that this expensive notebook will be reliable again in the future

  Jonathan

  Post edited by: fishb0ng

  Read this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54761&TSTART=75

  The user could resolve update card reader driver but delete the previous class installed, restart.

• Satellite A500 - 18Q - a black screen during installation of Windows

  Hello

  on my laptop Satellite A500 - 18Q when I install Windows I don't see the screen
  Only when I connect external monitor through HDMI or RGB.

  But when I install Ubuntu it looks exactly like the screen of the laptop.

  Anyone know what this may be?
  Spanish I m sorry for my English

  You see, when you start your laptop Toshiba welcome screen?
  You can enter the BIOS settings and see?
  You can enter advanced startup options (F8) and start windows in safe mode? Everything you see on the screen?

• Blue Screen Of Death on a new Satellite A500 - 18Q

  Hey everybody,

  I have a new Satellite A500 - 18Q, I bought last week. It works Win7x64, and all was well and good until last night, when I got my first BSOD.
  Well, my first impression was that I shouldn't react since the created conflict was perhaps punctual. But today, I got another.

  Either way, I got the message that he maybe a video hardware error. I tried solutions electronically, because on both occasions, I have pointed out the technical details of Ms.
  Please, I'm sure you understand, I very am furstrated by the situation as a whole. I would appreciate any kind of help, in order to establish the cause and a possible solution.

  Please find enclosed the details:

  ================================================== =======10/2/10 12:09am

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1032

  Additional information about the problem
  BCCode: 117
  BCP1: FFFFFA8008937010
  BCP2: FFFFF8800468D490
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys
  Information about the server: a7c54607-4a75-4764-b368-36680ac6f055

  ================================================== ===================

  Description
  The computer was restarted after a bugcheck. The bugcheck was: 0 x 00000116 (0xfffff88004c61f90, 0xffffffffc000009a, 0xfffffa8008937010, 0 x 0000000000000004). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 021010-21294-01.
  ================================================== =====================================

  and the other:

  ================================================== =====================================

  Description

  Problem event name: LiveKernelEvent

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1032

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA80047BC4E0

  BCP2: FFFFF880046CF490

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Bucket ID: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys

  Information about the server: f1b0c360-75f1-4ea4-b50d-5c0f9b727121

  ================================================== ====================

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1032

  Additional information about the problem
  BCCode: 116
  BCP1: FFFFFA80047BC4E0
  BCP2: FFFFF88004CA3F90
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1
  Bucket ID: Ys X64_0x116_TdrBCR:4:C000009A_Tdr:2_IMAGE_nvlddmkm.s
  Information about the server: 93159d6c-71a4-4f78-957f-b4e02772d561

  ================================================== ====================================

  Thank you much in advance. I would appreciate your contribution.

  FB.

  I googled around and found many forums where people discuss about this, and it probably has something to do with the graphics card.
  Maybe you should back up all your important data and install the operating system using recovery disc HARD (F8) option. Test a few days without having to install additional software.

  If the problem recurs, maybe you should contact the nearest Toshiba service provider and ask for help.

• Satellite Pro 4600 very unstable and BSOD

  Hello

  I have a Satellite Pro 4600 c750/128 with xp installed.
  It was ok, but slow, so I've updated at 500 MB of memory.

  He now became unstable under windows and throw a screen blue after awhile, which is a related, but firm and we will restart until I have a chance to read the error message.

  I tested the new memory from one day to the next with memtest and run 4 passes all tests without error, about 9 hours of operation (on the back).

  The event log indicates a discharge, but this does not mean a lot to me.
  The event log has an error during startup, what was there before the memory upgrade.
  Googling Sugest a fix to update the bios, it's always available for this laptop bios?

  The BIOS should be available for this former Satellite Pro 4600.
  The BIOS and drivers must be placed on the page of European driver of Toshiba.
  Here, you will need to search the Archives!

  But I doubt that the error is caused by the BIOS.
  Is the laptop ran stable also with the previous BIOS and it foolish to update the BIOS to fix this problem.
  I'm sure it won't change anything!

  Upgrade the RAM and BSOD appears now.
  I think that the problem is related to the RAM, even if the ram test didn't find any errors
  The RAM may be not compatible also if no error has been detected.

  I recommend that you test the laptop without the new RAM and check if the BSOD will appear again.

• Satellite A500 - 18Q - battery is at 25% in 4 days

  My Satellite A500 - 18Q when standing up, the battery is exhausted to 25% in 4 days.

  Try to check if Usb sleep & charge, is activated. I had the same problem with usb charging on and disappeared after disabling

• Satellite A500 - 18Q - more much-needed new battery

  I own a laptop satellite for a year now, and my battery is already degraded so that its becomes more and more annoying to use.

  I want to buy a new one, but I would like a more powerful if possible.

  Y at - it battery competible with the Satellite A500 - 18Q that lasts more than 2 hours (when new)?

  Thank you!

  Hello

  As far as I know the compatible batteries are:
  Reference number: PA3534U-1BRS,.
  Reference number: PA3534U-1BAS

  I think these are: 4000mAh

  Usually time to battery performance depends on the use of the laptop.
  You can set the friendly use of battery power portable power settings more.
  This will help you to extend the use of the battery!

• My Dell 15R crashes if I play a game (GTA IV, II M.a.f.i.a) for about 3-4 minutes and BSOD appears

  I just got a new Dell 15R (i7, 8 GB of RAM, 1 TB HDD, AMD HD 7730 M 2 GB graphics) and I tried to play M.a.f.i.a2 with and without steam and twice, after playing them for 3-4 minutes, the game crashed and BSOD appeared. It happened so in GTA IV. I've updated my graphics driver, but it made no difference. I also did a system restore, which also did not work. The error that I got from the event viewer:-System - Provider [name] Microsoft-Windows-Kernel-Power [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} event 41 Version 2 level 1 task Opcode 0 keywords 0 63 ID x 8000000000000002 - TimeCreated [SystemTime] 2013-01 - 21 T 18: 52:05.392015600Z EventRecordID 12512 correlation - execution [ProcessID] 4 [ThreadID] 8 channels computer system Kasutaja-PC - security [UserID] S-1-5-18 - EventData BugcheckCode 278 BugcheckParameter1 0xfffffa80080424e0 BugcheckParameter2 0xfffff880015aaaf4 BugcheckParameter3 0 x 0 BugcheckParameter4 0 x 2 SleepInProgress fake PowerButtonTimestamp 0

  This BSOD could be linked to the power options?

  Yes. No guarantee, but when playing system emphasizing games that you want to use the High-Performance option.
  The other options are there to help extend a battery charge, but you can not expect to
  play these games on the battery (for long), or without as much power as possible.
  Your graphics for laptops is certainly capable.
  .

• Satellite A500 PSAR9E. Someone tryied to install the SSD to conn JSSD?

  Hello!

  Now my satellite A500 is completely disassembled and I am looking for what is inside and what is possible to upgrade. The most interesting for me is jssd connector on the bottom of the motherboard.

  This information was already mentioned on toshiba American forum but has not ended.
  It's someone who's been tryied/successedid to install the ssd drive to this place or this connection is physically disabled by the BIOS of the motherboard?

  And including this interface mSATA 1.8 inches?

  I myself want to try this connection if I find this ssd or the usual sata interface cable.

  If the micro SATA port is available on the motherboard, the interface should work.
  But there is a question open about the BIOS. If the BIOS would not provide support for the micro SATA, then new SSD connected would be not recognized
  However, I have not found useful information on BIOS support...

• Satellite A500 does not show 'time remaining' for the battery

  I just bought Satellite A500 with Windows 7 and I noticed one thing, it is that there is no "remaining time" for the battery?

  My former use A100 to display the time remaining on the power but not Windows 7, all I get is a remaining percentage... makes it go for all of the A500 running windows 7 or is - it something wrong with my new computer?

  I guess that the Win 7 drivers should be released in the near future, it seems that Toshiba is driver downloading
  Then maybe after the driver version complete you will get this battery notification allows you to see how it will work

• My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.

  My creative cloud app Manager begins immediately the update when it is opened, and it freezes and never ends the update.  So I'm not able to access anything whatsoever.  How to stop the update process, or reload?  I have to reinstall everything?

  Hello

  You have to just reinstall CC app. Please follow the steps mentioned below to solve this problem, depending on your operating system.

  (Mac)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

• Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello

  Please make sure you check "Desktop Redirection" option in the properties of the site.

  Here's how to get there.

  Presentation of the Tablet:

  File > Site Properties > Tablet > check "desktop Redirection.

  Mobile layout:

  File > Site Properties > Mobile > check "desktop Redirection.

  Re-upload the site and then check out. You should be all set.

  If the problem persists, please share the URL of the site for further investigation.

  Concerning

  Vivek