Satellite A60 don't reload - request of Jack

Similar Questions

• Satellite A60-142: motherboard and DC Jack

  Hello

  I need someone to help me.

  My laptop broke down a few months ago because of the CC is broken. I'm looking for the DC JACK model, necessary for the laptop, but as long as I have searched the web, I couldn't see everything. I bought one on ebay (USA) for the A60 series, but is not compatible with the European model of S60 142 I.

  Anyone know where I can find, or can I discovered the true model DC JACK I need?

  Thankls in advance!

  Kind regards
  Alfonso

  Hello

  If you have a European Satellite A60 notebook, then you must contact the ASP in your country to order the compatible DC Jack.
  The authorized service provider who is responsible for your country could order this tiny part directly from Toshiba.

  Best regards

• Satellite A60 - white screen Freeze on Boot up

  Hello

  My laptop Satellite A60-106 has developed a problem starting up upward. It just hangs on a white to the startup screen until I see all the graphics. It seems that it can access the CD/DVD drive, but any attempt to start with a recovery disk fails in the same white screen and it freezes. I tried the advice from manufacturers that power with the F12 key and another suggestion on the
  CD hold down the C key while powering brings the same result.

  Nothing other than the white screen. I tried F8 to see if I can get into safe mode but it will not exceed the original deaf of readers and then silence. I can't imagine a way to get it to allow me to pass. I'm sure you can however? I'd be happy to format and reload but if I can't access the drive so how can I do this?

  I wanted to increase the RAM, but all the suggestions in the book of the hand do not relate to the layout of my laptop. The small Access window on the bottom of the laptop will not provide sufficient access to the RAM? Poking around the RAM could have induced this white screen lock?

  Thank you
  Charlie

  Hello, Charlie

  To be honest you have serious problem and I really don't believe that you can solve alone. It is not easy to say with certainty why white screen occurs at startup to the top. In my opinion there are several reasons responsible for this.
  -Display (electronic LCD screen, cable)
  -as far as I know white screen occurs if FL dimmer makes background light but there is no signal display can be defects on the motherboard and there is no video signal

  The best thing you can do is to contact the authorized service provider. They check your laptop. They have special tools and there is no problem to know why this happen.

  Good bye

• Satellite A60 and energy saving issues

  Hello

  I am facing a problem that drives me crazy. After I formatted my laptop and install Windows XP, I'm never able to install Toshiba Power Saver or any kind of Toshiba Utilities. Setup turns on, but after that, it displays an error message (sometimes just sound no message) and it stops.

  To be more precise:

  I use a Satellite A60-302, with extra addition of 256 MB of RAM. I formatted the C: partition and installed Windows XP Professional (I tried 3 different versions: right XP, XP with integrated SP1, XP with SP2 integrated; just to be sure if the problem was caused by service packs). Then I inserted the CD provided, put in place the ATI card, etc. its pilots respecting order but when it comes to saving energy, the nightmare starts.

  I removed the RAM I added and tried the whole installation by the original Setup process, but no change... My hard drives are well checked for any kind of virus, and the installation process was done with the ethernet cable connected to offshore to prevent any possible intrusion.

  Funny, I remember setting up Win XP Pro on this machine before 3 months no problem at all. The only significant change since that day is the update of the BIOS from 1.60 to 1.80.

  Looks like a "common modules" error but it is not "common modules", on the CD or on the internet.

  Finally, I must say that I can't use my recovery CD because it's Windows XP Home Edition in Turkish, but I use Windows XP Professional English provided by my employer.

  Any help? I'll be delightened if someone could help me.

  Post edited by: sunfury

  Hi sunfury,.

  I imagine you're nettled. But there must be a solution to your problem.

  You are right. There is no common Modules for this machine. Usually the common Modules, all Toshiba tools depend on. It is the main module.

  In your case, it is very important to use a specific order of installation. Normally, you must use the order of Installation set by Toshiba. You can find it on
  http://support.toshiba-tro.de/tools/satellite/SA60/win-XP/install_xp_na_en.zip.

  But there is also another solution. I usually install on this path:
  -OS
  -chipset + display driver
  -audio driver
  -fix for... (all)
  -one other drivers (modem, LAN etc..)

  When you want to install the tools of Toshiba try in this order:
  -Power Sawer
  -Init GST
  -TOSHIBA Hotkey Utility
  -TOSHIBA Hotkey Utility for display
  -Other utilities
  -TOSHIBA Console

  If you want to install SP2, maybe it will be better to do it later. It is also possible that some of the tools after installation of SP2 will not function properly.
  http://support.toshiba-tro.de/Tools/updates/Windows-XP-SP2/mwxpsp2ui-XP-11.zip

  If you still have problems made me know.

  Good luck!

• Satellite A60: Unable to connect to the internet via a modem - no dial-up

  In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

  Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
  The driver is asyncmac.sys = MS Access Remote network serial driver.

  I have:
  -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
  -modem uninstalled / reinstalled
  -update of Windows XP through windows update
  -update of the bios / modem / network drivers from Toshiba

  No luck, the RAS asynchronous card error is still there.

  Any suggestion?
  Thank you
  Alessio - Italy

  I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
  The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
  On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
  http://forums.practicallynetworked.com/showthread.php?t=6781
  I followed the instructions and run RArepair.exe.
  It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

• Canoe install audio driver on my old Satellite A60

  Hi all

  I have an old laptop Satellite A60, and he had a problem so I formatted and reinstall windows, but I didn't have the original CD of windows came with this laptop so I used another CD that was provided by toshiba (I have another mobile satellite (I don't remember the exact model)). Everything worked fine, most of the toshiba utilities was already installed, but the graphics and audio cards drivers, missing (normal). I went to the toshiba website and download the audio drivers, installed, and when I clicked to restart the computer, after 2-3 seconds, I get a blue screen of death with the error STOP: 0x000008E and a TVS.sys file

  So I opened the computer and the driver was still missing. A few times, the driver is there and windows will not open and I have to go into safe mode and uninstall the driver. It's really annoying. I have tried other older versions of realtek AC97 drivers but does not work either. I tried like versions of the original that I downloaded from the official website of toshiba and 3 drivers, nothing works... The graphics card has functioned well tho... but having no sound is annoying...

  Does anyone have an idea what could be the problem?

  Different models of laptops have different hardware platforms and each recovery image is created for some portable model. Maybe this other model has different chipset, GPU, WLAN card, sound card, and so on.
  So I m really not ask you got BSOD at the beginning. There must be a conflict (registry entries) driver.

  What you can try is to install again and remove almost all the drivers installed and try to install the right drivers for the Toshiba download page in the hope that everything will be OK.
  I m not 100% sure, but tvs.sys probably owned audio filter.

• Black screen on my satellite A60

  Someone help pleae. Downloaded a pack of sevice on my satellite A60 and he did serious damage to a graphics driver... decided to recovery sysem completely... Put the recovery disk in... rebooted, held the key c pressed and nothing happens... it starts up but no display at all... machine very quiet well on... help!

  Yes, I had the same thing, but with my satellite P10 (blue one), its still very new and I don't think that the problem was with the battery etc since when I loaded, right after the orange charge turns green after awhile, which indicates its fully charged.

  I just played an online game when all of a sudden the laptop instantly closed (it was on the charger ALL the time, but like I said the problem isn't here) then I tried to re - open myh laptop, everything was ok, except the screen, which was black ALL the time, there was no noise which indicated that the laptop did not enter windows.

  And as Raym0nd said, my cell phone was a little unusually quiet too...

  I hope to get professional help on this. Thank you.

  P.S: I realized that, when the laptop is turned off (I played an online game) that the internet connection was not longer working because it has expired. That has affected the laptop, because when you're not online and your game, it closes instantly, the game that is... But I had this situation many times before... Why it is like that now...?

  I need help as soon as POSSIBLE... Thank you all very much.

• Equium or Satellite A60

  I just got a new laptop. He says that it is an Equium A60 but when I have regestered with Toshiba is said that it is a Satellite A60. Is there a difference? I also bought a wireless adapter mini pci to adapt as it is not ready wireless but when I opened the lid of the wireless card is not a slot at the back of the MOBO and 2 screws. All advice welcome

  Hi John

  As far as I know the series Equium made just for the United Kingdom. I'm not 100% sure but I think it's the same model but cell phones in the United Kingdom have a different name.

  One of my friends told me that some store in the United Kingdom (Dixons or something like that) offers models of computers portable satellite. It is also possible that Toshiba is registered under the name of Satellite. But don't you worry. Your serial number is important and if the service partner needs to check something they need for a serial number and not the name of the model.

  Good luck with your new toy!

• Re: Satellite A60 - overheating problem

  Hello

  I have some difficulties to adjust temperature and fan on my Satellite A60.
  The operating system is Debian and the fan operates at temperatures of 60-65 degrees Celsius (without any process started after the login).
  I had installed utilities like toshutils, fancontrol, lm-sensors... but basically I have not found a solution for this:

  toshiba_acpi #modprobe
  Error: No such device

  Toshiba #modprobe
  Error: No such device

  Now, I ask you advice, please.
  If there are no alternative solutions, recompiling the kernel 2.6.24 (or other) is a solution to this problem? If the answer is 'Yes', how to prepare the package source?

  Now the system works, but not very well at that latitude this question isn't a good prelude to my summer job.

  Best regards

  HM,

  already checked the debian/gentoo/ubuntu forums? Or maybe freshmeat.net where toshutils all appear in their projects?

  Unfortunately I can't tell you why the modprobe won´t work but don't you compiled the kernel option ACPI from toshiba? It must be something that controls the trough of explicitly from functions ACPI kernel using the userlevel tools.

  By the way: have you read newspapers after trying the modprobe of the listed modules you´ve? Please make the modprobe more 'verbose', there may be something usable...

  Welcome them

• Satellite A60-wireless network card

  Hi I have a psa60e anyone know where I can get a wireless LAN card, in my opinion, he is the one who will go inside because I don't want one of those pcmcia cards that come out of the side

  any help would be appreciated as toshiba have already given this model and the web site has going me round in circles for part only

  Hello

  for Satellite A60, you can use this map:
  Wireless LAN Mini PCI Card (802. 11 b / g)
  Part No.: PA3300U-1MPC

  You can find it on the web page of Toshiba.

  Good bye

• Replacement of the HDD on the Satellite A60

  I have an old Toshiba Satellite A60. The old 30 GB Toshiba HDD (MK3025GAS) died. I bought a 60 GB Toshiba HDD (MK602GAX) as a replacement.

  My problem is that I can't get the bios to see the new drive and start with it. "For the old disk bios dead says under ' built in HDD = Primary IDE (1F0H/IRQ14). With the new HARD drive it says "built on the disk HARD = No. Drive'."

  Using a cd, I installed Ubuntu on the new HARD drive. The ubuntu installation cd sees the new HARD drive and allows me to format it and install Ubuntu. When the installation is complete, and I try to start Ubuntu, nothing happens, and the menu of the Bios still displays "built on the disk HARD = No. Drive'."

  If I run Ubuntu from a cd I can 'explorer' 60 GB HARD drive and see all the installed files of Ubuntu. I can't boot the PC from the HARD disk or just to get the BIOS to recognize his presence.

  I'm a bit confused and don't know what to do. Ideas anyone?

  For me, this looks like a compatibility issue. Unfortunately there is no public document where we can find info on all compatible disks.
  To be honest I m really wondering why the new HARD drive is not recognized correctly. Problem, is that you can not force laptop recognize each RAM or HARD drive.

  What to do now?
  I put t think some update of the BIOS will help so I m afraid you must get a new or another HDD and test if it works or not.
  I presume that this 60 GB HARD disk was not new, right?

• How can satellite A60-124 - I extract BIOS or reset?

  Hello

  I am looking for the solution to extract the BIOS on Satellite A60 (PSA60E 09T060FR) or a procedure to reset the chip.
  Here is the "software model inside of the bios-m I 2238

  Thank you very much

  Hello!

  I put t know what you mean with extract from the BIOS but BIOS reset can be done from an ASP. ASP is able to reflash the ROM module if it possible of s and reset the BIOS.

  I think the best way is to contact you an ASP. They can help you because here it s only a user to user forum.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A60 - memory increased

  My Satellite A60 has 256 MB of memory and is vey slow these days. I removed several applications, but he healed partially the problem. I also defragment the hard drive. Could I need more memory?

  Counsel would be appreciated - how get it and install it?

  Hi Charles,

  Increasing your RAM will be an improvement, but only with applications that are particularly intensive memory. It is heavy graphics using games and utilities such as photo manipulation, video editing etc.

  It is much more likely that your system is hampered by the excessive task that runs after your first commissioning. Check in your task for the background process manager how you running and how much resources they actually are using. For a typical installation of XP, I would expect that there is between 45-50 running processes.

  Unless you have already done so I would recommend running a spyware (ADAWARE SE and SPYBOT S & D) utility that can be freely downloaded from the Internet, to see what presents itself.

  I see that you have already defragmented your drive hard, which is great, but I highly recommend running the disk cleanup utility as well to get rid of all unnecessary clutter.

  With regard to the RAM, I believe that the maximum that you can expand to 1280 Mb is, and I would recommend that you use Toshiba or RAM Kingston modules like these are tested to work with your laptop. I also used the modules of ORCA in my own laptop wuite successfully. Really, the choice is yours.

  Information on the replacement of the RAM modules are usually contained in the manual of your users and should also provide details of the procedure to follow.

  HTH

• Problems with map graphics on my Satellite A60-672

  I have a Satellite A60-672 which graphics by ATI. Repeatedly at startup until it broke down and the system crash online said whenever it is ATI technologies. I sent ATI and they said that there is nothing to do with them.

  I tried Toshiba, but none of the work address by e-mail. The crash system tells me to uninstall the software, but given that I put on, I mistrust all this as it may ruin the functioning of my laptop.

  Currently, my laptop works very well with this ongoing problem. This happened to someone else or we know how to contact toshiba.

  Thank you

  Sounds like a driver problem, you just need to download the Toshiba display driver, uninstall your old ATI driver with the ATI Control Panel, restart and reinstall again.
  don't worry this will cause anything on your laptop in addition to repairing damaged files that crash. It is a simple operation.

• Constant rebooting with blue screen - Satellite A60 332

  I have a Satellite A60-332 for topic a little more than two years now, recently, I noticed two major problems which I did not have time to run to the top:

  1. sometimes the laptop restarts just by itself for no reason. When I'm working, a blue screen with white text pops up for half a second and restart the system. Rarely another question occurs after that it will not restart but will be beep like crazy.

  2. I've had this problem since I bought my laptop; Sometimes the laptop won't play audio. What happens is after turning on the system; If the audio does not work: all the 'switches' in the volume control window will be present (wave, cd player, to the, telephone line, etc.). But sometimes when the audio does not work it just shows three switches, not more.

  I've had these two problems for a while now, and I've reformatted my computer at least 5 times since I bought it, these problems never go away.

  I also had another question; my hard drive is the 30 GB supplied with Toshiba. I tried to upgrade, but heard that most laptops, including Toshiba, have a hidden partition on the hard disk called a tatoo, that is when some of the system files are stored so that when you run the recovery discs, they function properly. Can anyone confirm this because, of course, is not a pull & pop work to install a new hard drive, because I won't be able to copy this tatoo.

  Many thanks for any help in advance.

  Hello

  1.) BSOD appears mainly due to the failure of the serious software or hardware failure. The laptop could also automatically stopped due to overheating. In this case, you should check your fans and clean if possible with the vacuum cleaner. But be careful. If it won't work not then test the operating system with the new installation of the OS. Perhaps a 3rd party software is a bad influence.
  In addition, check if the device uses the latest version of the BIOS. If this is not the case, the update.

  2.) don t know why this happens but maybe due to overheating mentioned.
  However, you could try reinstalling the audio driver.

  3.) sometimes laptops come with the Qosmio player or express media player. These players are installed on the hidden partition. I don t think that there could be another reason for hidden partitions.