Satellite A660-18 WLan turns off after the coming of sleep and the custom to reactivate

Similar Questions

• Satellite A660 - 1 EV turns off after 10 minutes of game

  I have problem with my cooling system.

  The problem is that I start a game (FIFA 12) and 10 minutes later, the laptop is off... Some time ago I sent it for repair place, you bought that I burn cooling and then the problem disappeared... Descriptions of... problem comes after the replacement of its cooling

  Hello

  I agree that dust and debris that can affect cooling performance.
  I have clean the fans myself using a jet of compressed air.
  Just blow the dust using the spray of compressed air that helps a lot.

• My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  My Satellite Pro M70 itself turns off in the middle of the secuence of startup

  After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
  without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

  The problem becomes bigger and bigger as punishment I can boot any operating system

  As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

  Someone has an idea of what can happen?

  Thank you

  Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

  Well, in this case I would exclude the RAM to malfunction.

  I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

  What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

  In my opinion, you should check the HDD and maybe try another.

  Welcome them

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• Display does not decrease or turn off after the time specified in the power settings.

  Hello

  I have HP Pavilion dv6-2140's. It is 1.5 years old. For a few days, my computer doesnot dim laptop screen or stops itself when not in use. I did the settings or power options. tried both recommended hp and energy saving. waited for several minutes, but neither the screen became decrease or stop. It was plugged and I slept something, but I knew he would go to standby mode after 15 minutes, but when I woke in the morning, he was still on with its full brightness for nearly 6 hours! That's what really shocked me, and then I checked for everything on google, but couldn't find anything. So please help me. Why is it so. I didn't install anything, nothing updated.

  Thank you

  Please update the latest version of the BIOS for your laptop and also check if your laptop screen is turned off when the unit works only with the battery.
  Go to control Panel\All Control Panel Items\Power Options\Edit Plan Settings and configure the parameters of the battery and check if the display turns off. In case it does, you can try then configure the parameters of the plan when the unit is plugged.

• The computer screen does not turn off after the specified power Options

  I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

  I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• Satellite A660 - optical driver turns off when burning DVD

  I have a problem with the optical drive of energy saving options that disables the drive while burning.

  I tried all the suggestions mentioned here [http://forums.toshiba.com/t5/Satellite-Laptops-A-Series/Optical-drive-automatically-turns-off-due-to-power-saver/td-p/223654], but it does not help.

  I start at the burn in Ashampoo Burning Studio free, and he seems to be good until the end. When it starts the process of lead-out the popup of the optical signals Drive Power drive is turned off. It's funny because it is still running at the speed of combustion and it will not stop. The reader becomes unresponsive, even I can't the DVD out. Even, that it disappears from the list of devices.

  The only way I thought so far to stop the car and release the DVD is in the shutdown/Hibernate the computer.

  Once the dive starts working again the STRANGE Fn-tab functionality started working and I can turn it on/Off/ejection at will.

  All the burned DVD - s are not valid, and so far I have not managed to burn a single functional DVD.

  I have a Toshiba Satellite A660 - PSAW3E with Win7 Enterprise 64-bit.

  Is there a way to fix this? Remove the optical drive power management?

  Hello

  To be honest I have never heard of this issue, but it appears that the optical drive power management is part of the power of Toshiba configuration utility.
  Part of the Toshiba value added package configuration done Toshiba power utility.

  What you can try, for testing purposes, to remove the Toshiba added value of the system package, restart your computer and try to burn DVDs again to see if the same problem will occur again.

  Toshiba value added package contains several tools such as utility cards flash FN so after his withdrawal, you will not be able to use the FN keys. In any case, after that trial, you can download and install Toshiba value added package again.

  I mean, I know what kind of conflict is there, but maybe you should consider it.

• Re: Satellite A660 - 11 M - Random freezing after the installation of recovery

  Hello

  I recently bought an A660 - 11 m, which I was happy for a few months and then it started to crash/freeze randomly in windows. I'd do something and then it just would freeze indefinitely, requiring a second 5 press the power button to turn it off manually. The fan and hard drives would continue to work if he did something, or they wouldn't be if I was not doing something at the time (this has happened four times). After that it's the only thing to do would be to reinstall the entire operating system by using the manufacturers recovery disk. The computer will then work fine for a few days or a few weeks (never more than 2 weeks) and it would be demanding full gel reinstall again. I had reinstall my programs every time but I stopped on the last 2 times and it made no difference.

  After that the computer crashed it would then refuse to boot into windows. It would be still stuck just at the moment where the sign of windows appears. I would like to know that he had crashed as the 4 colored dots appear. The computer would simply wants at this point, continually getting stuck there after the reboot of several manual. Once and only once it booted into windows on its own, but it took almost 30 minutes and the computer is very slow and unresponsive. The computer will sometimes start in safe mode, but it varies. I tried Startup Repair tool and all stages of system restore, but none of these work.

  I got to use Acronis true image10 and creating an image of the system which can then replace the whole computer in all 25mins. This saves me time, rather than wait 2 hours or whatever it is to reinstall the toshiba, but becomes quite ridiculous to have to keep re install every two weeks.

  I also tried to buy a stand-alone copy of windows 7 (while recording an image of the partition of toshiba in the case where I need) I think it might be due to all toshiba programs and other bits and pieces that are installed on the computer - it makes much faster startup, but the computer still crashes the same after awhile.

  I am sure its some ware conflicts or driver pretty hard, but I don't know what.

  Any help please!

  Rob

  Hi Rob,

  I m also do not know what exactly is the problem and I believe that no one here can say that just because it s just a user to user forum.

  Fact is that if you have already tried restore factory Toshiba recovery disc multiple times, it s not a software or driver issue because it s an image pre-tested by Toshiba.

  I guess it must be a hardware malfunction and therefore, you should contact a service provider for help. Guys can check your laptop and if it of under warranty, the repair is free.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite C850 - 13 c turns off after upgrade CPU

  Hello

  I have a Satellite C850 - 13 c with the b820 cpu celeron. I bought a core i5 2450 m to upgrade, but after I installed the new processor, the laptop turns off each time after 30 minutes exactly.

  The problem happens also in bios mode. In the first 30 minutes, the laptop works perfectly but it just closed down without warning.

  Aparently others had the same problem with this laptop model, even with a core i3 cpu upgrade.

  I've tried so far things:

  -Ventilation control system - everything ok, temp is not above 40 ° c
  -Updated bios updated to the latest version
  -People with mobility reduced all the main functions of the cpu in the bios
  -The battery bios reset
  -Tried with AC adapter only, only battery, same result.

  This model just don't treat a larger cpu?
  Please help :(

  So generally the CPU upgrade is not possible with this show you are yourself and any exchange of material is at your own risk only.

  Problem is that Toshiba doesn't any info says on the upgrade of CPU and functionality with different processors. Thanks to a specific design, there is danger of overheating.
  In your case, it is interesting that laptop off after exactly after 30 min.

  Unfortunately I can't help you with this, but this case is very interesting announcement I will continue to follow the discussion. Let's see what other people will write about it.

• Satellite P200-1 - wireless turns off after reboot

  Hello

  On Satellite P200-1BY, on reboot, the wi - fi turns off to restart. The switch is then unnecessary.
  I do not know whence they come, and an another reboot put the right thing.

  Can reactivate you with FN + F8?

• Satellite A205-S5804 broekn - turns off after I turn it on.

  Hello. My A205-S5804 broke down yesterday. It turns off seconds after I turn on (the fact both on battery and that too), then turn it on and off repeatedly for like four times before stay off. It shows nothing on the screen doesn´t POST and no beeps.

  Y at - it something that I can do to fix it myself, or I need to take it to the ASP?

  In my opinion, there is a serious hardware problem and I highly recommend you contact nearest Toshiba authorized maintainer.
  They run diagnostic tools and know what the problem is.

  Sorry, but I don't think that there is nothing you can do about it.

• Latitude D610 screen turns off after the Windows XP loading screen

  I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?

  If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.

• System turns off after the connection because UPS is misconfigured

  Installing a UPS on XP as he said "he couldn't communicate with battery backup.  I suspect (pretty sure) I put the codes, i.e. signals for the loss of power senseing incorrectly.  So when XP starts, connects and defines then personnal settings immediately it detects a loss of power and down, it is to say newspapers turns off and stops.  By inserting a bootable disc, I get the display for differnet start modes, etc. without danger, but the arrows do not work.  He maintains "normal" startup  So, I'm in a loop.  Pressing F8 does nothing.  I tried several times with the same results.

  Can I get a bootable CD to somehow allow me to set the operating system to default values?  Or would that even work?

  Is this really what the message really says:

  He couldn't communicate with battery backup

  What is the brand and model of your UPS and you have the correct wiring to it and the installed software?
  Configuring UPS never worked correctly before?
  What do you mean "set you codes loss of power properly detection."

  What bootable disc are you using?

  If you think that the XP UPS Service gives you a hard time, you can start the XP Recovery Console and disable it.

  If you have any bootable installation CD XP authentic where you can start in the XP Recovery Console, so you can make a bootable CD from the Console of the Recovery XP (no XP media required) and then just disable the UPS Service does not start during the next reboot.

  Once you enter the Recovery Console, type this command:

  turn off the UPS

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true