Latitude D610 screen turns off after the Windows XP loading screen

Similar Questions

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• The computer screen does not turn off after the specified power Options

  I tried several ways on trying to turn off my monitor of my laptop through the options of food and the use of some applications such as nircmd but nothing works every time. I'm sure it can be a program I am not using a device. I have a wireless mouse plugged into a USB port, but I know that's not what is keeping the PC awake, as always happens when it is not plugged. The thing that bothers me is I don't know how to identify this process shut off and I tried to put end as many process I can safely or those that I am knowledgeable in the subject to close. I would really like this feature back. Thanks in advance for the answers and ask if all the details are needed.

  I understood what was the 'problem '. It turns the screen of my laptop never turns off if my laptop is installed on a sloping surface, because it assumes that I'm working on it. When I went to bed my laptop on a flat level surface, is power does work normally, as reduces the brightness of the screen to the bottom, then turns off after a while. I guess it must be a form any a single function on my laptop. Thanks for all your answers.

• Display does not decrease or turn off after the time specified in the power settings.

  Hello

  I have HP Pavilion dv6-2140's. It is 1.5 years old. For a few days, my computer doesnot dim laptop screen or stops itself when not in use. I did the settings or power options. tried both recommended hp and energy saving. waited for several minutes, but neither the screen became decrease or stop. It was plugged and I slept something, but I knew he would go to standby mode after 15 minutes, but when I woke in the morning, he was still on with its full brightness for nearly 6 hours! That's what really shocked me, and then I checked for everything on google, but couldn't find anything. So please help me. Why is it so. I didn't install anything, nothing updated.

  Thank you

  Please update the latest version of the BIOS for your laptop and also check if your laptop screen is turned off when the unit works only with the battery.
  Go to control Panel\All Control Panel Items\Power Options\Edit Plan Settings and configure the parameters of the battery and check if the display turns off. In case it does, you can try then configure the parameters of the plan when the unit is plugged.

• Satellite A210 - turs screen off after the Windows startup screen

  When I start my windows there is the splash screen. After that, my screen goes off and cannot log on to windows.
  Satellite A210
  ATI Mobility Radeon HD2600

  Where can I get some old drivers for the ATI Mobility Radeon HD2600, that I can install without starting windows?

  > Where can I get some old drivers for the ATI Mobility Radeon HD2600, I can install without starting windows?

  Please don t get me wrong, but I think you're on the wrong track.
  (Graphics card, LAN, etc.) device drivers must be installed in the currently running system (i.e: Windows OS, etc.)

  I m sure; pilot isn t the problem if nothing is visible on the screen.

  First of all, I would recommend you to connect the laptop to an external monitor/screen just to see if something would be visible on the screen 2.

  But just a question: have you tried to start Notepad using a boot disk (windows installation disc, the disc recovery Toshiba or similar?).
  Maybe the Windows system is confusing upward and therefore, you are not able to start the system? In my opinion, you should test this option.

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• System turns off after the connection because UPS is misconfigured

  Installing a UPS on XP as he said "he couldn't communicate with battery backup.  I suspect (pretty sure) I put the codes, i.e. signals for the loss of power senseing incorrectly.  So when XP starts, connects and defines then personnal settings immediately it detects a loss of power and down, it is to say newspapers turns off and stops.  By inserting a bootable disc, I get the display for differnet start modes, etc. without danger, but the arrows do not work.  He maintains "normal" startup  So, I'm in a loop.  Pressing F8 does nothing.  I tried several times with the same results.

  Can I get a bootable CD to somehow allow me to set the operating system to default values?  Or would that even work?

  Is this really what the message really says:

  He couldn't communicate with battery backup

  What is the brand and model of your UPS and you have the correct wiring to it and the installed software?
  Configuring UPS never worked correctly before?
  What do you mean "set you codes loss of power properly detection."

  What bootable disc are you using?

  If you think that the XP UPS Service gives you a hard time, you can start the XP Recovery Console and disable it.

  If you have any bootable installation CD XP authentic where you can start in the XP Recovery Console, so you can make a bootable CD from the Console of the Recovery XP (no XP media required) and then just disable the UPS Service does not start during the next reboot.

  Once you enter the Recovery Console, type this command:

  turn off the UPS

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• HDD turns off after the mode 'sleep'?

  I would like to know if the hard drive would turn out or not after the mode 'sleep'.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  The computer do not hibernate unless it stops the disc after writing the hibernation file.

  Mode for similarly low-power stop discs 1

• How to stop the narrative turn off after the end of the video track?

  Hello world.

  As the title says, how can I disable this "feature" absurd? This issue of unique break literally makes the unusable software for me.

  I combed the Panel options and found nothing obvious. I combed also internet to see this: https://helpx.adobe.com/premiere-elements/using/create-narrations.html , which says:

  When you have finished narration, click the Stop button.

  An audio clip containing the narration is added to the active panel of the project and to the Narration track in the timeline of Quick view or the calendar of the expert opinion (below the selected clip).

  Note:

  If you do not click the Stop button, recording stops automatically at the beginning of the next file in the Narration track, or 30 seconds after the end of the last item in the quick view chronology or timeline of the expert opinion.

  Really? I did something wrong or is - this software really broken by design? The design team has already considered that a user might want to tell first and extend video to the narrative later? Is it possible to disable this "feature" break or get a refund if not?

  Thanks in advance.

  Stark Zodiark

  Just in case reference. This isn't Adobe. Instead a user. The frequency of the presence of Adobe in this forum is not defined.

  By the nature of your question, I'll give you the information to return/refund first...

  If you bought the first elements 13 Adobe for download in the last 30 days, you can request a return/refund. Please visit the following link.

  Return, cancel or change an Adobe order

  You can also go to another path (probably takes you to the same place) orders of Adobe's cat.

  Contact the customer service

  First Elements

  Payment of membership, account,

  Payment order, invoices,

  Adobe Chat

  Now to your question.

  Please refer to ATR first troubleshooting items: PE: Narration recording stops after 30 seconds

  I wrote in 2013. He then applied and applies today 2015 for elements first 13/13.1.

  content is needed on a video track, an audio track, or the soundtrack to avoid the situation of "Narration recording stops after 30 seconds.

  The details related to this situation are included in the blog post with the link above.

  There is an Adobe feature Bug report request form that you might want to file with Adobe. The workaround is described in the blog post. I have not found (nor seen reports users say they have found) a way to change this requirement of storytelling other than what I have described in my blog.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  RTA

• Screen turns off after the opening of the session. The mouse cursor only appears

  Don't know where to post this, but here's my problem.

  I have a Dell laptop with VISTA professional who has worked perfect for 8-9 months. Since the beginning of December I started having this problem haunting log-in where to provide the user name and password, the screen turns white (black) and I see is a mouse cursor. Nothing else appears. I can get to the hostel Monsignor task by doing a Ctrl-Alt-Delete, but a stop or restart is not the problem. I tried the safe mode or VGA mode without result. The only thing that seems to work is time. If I leave the system at the prompt to logon for 5-10 minutes, I can then connect you ok but this delay is unacceptable. It's as if there is a service that needs timeout? Any ideas on what may cause this behavior?

  The behavior is also described by others here and here but none of the suggestions have solved the problem for me.

  Appreciate any help. Thank you!

  -Jetland

  You wanted to let you know the final outcome of this problem. I spent two good months of fighting through this problem and try all of the advice given. The problems have persisted. Beyond the suggestions here, there are pages on Google pages on this topic is delicate balancing sifting through the "answers".  So far, no one, including Microsoft, has been able to identify the problem or to locate a formal resolution. After having satisfied this during a road trip in 2 weeks, I have downgraded to Windows XP and wait anxiously for the release of Windows 7.

  -Jetland

• The RV042 web utility screen turns off after the connection

  I'm running a new RV042 with the latest firmware (4.1.1.01).  I put about 2 weeks ago and have been running without a problem.  Today, I tried to go the web utility to make a few changes.  I was invited for the user and password name, which seems to accept (if I typed in the wrong he rejected), and then the screen went blank (normally I would get the status display now.)  Instead, the screen I get is the blue light of the login screen, but there is nothing about it.  The router is passed to the https://192.168.1.1/home.htm page

  I have tried different browsers and access it from multiple computers - the situation is always the same.  I rolled power the router, and there is no change.  I suspect that the next step is a manual reset to factory settings - but of course I'd rather not (as I'm not saving all my settings of course!)

  Any suggestions for how to get to see the content?

  You can try to clear the cache of your browser.

• Cannot turn off after the upgrade to 10.11.4

  I have a late 2012 3.4 ghz i7 iMac / 32 RAM 10.11.4 running (and other iMacs around the office): I can't stop. When I try a stop down (after removal of servers/TimeMachine, close all applications - even unplugging the ethernet cable) - it goes to a black screen with the "circle of rotation of lines." They will be 'spin' this weekend if I let him. Instead, I'll put the machine to sleep during the week and make a hard cock down via the power button Friday night.

  I think it has something to do with the upgrade to 10.11.4. I have reset the PRAM and tried also to start up in the 'hidden' startup disk and first aid running without result. Tried to find preferences for throw - unsuccessfully - Finder found "com.apple.finder.sfl" I should throw?

  Another change is that now I'm using a new Pegasus2 18 to RAID hooked up via "2016" MacMini and Apple server software (replaced my Apple XServe)

  Someone at - there a method I can use to stop? Thanks for your help!

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Satellite A660-18 WLan turns off after the coming of sleep and the custom to reactivate

  Hello

  I have a satellite A660 18 with built in "Realtek RTL8191SE Wireless LAN 802.11n PCI - E NIC" wireless network adapter.

  When I come out of standby it is impossible to connect to a wireless network, they come to the top in the list but they just don't connect, when I run the troubleshooter it just says: "shure wireless (name) is within reach to make"the only way to solve this problem is to restart the laptop.
  Its got this problem since the day I bought it (in the pc world).

  I can not find online or on the downloads page toshiba bugfixes and after update the drivers for the wireless adapter it did not always work.
  Someone else had this or know how to permenantly fix and if not how do I contact toshiba on this subject.

  PS. It also has a screen stuck on maximum brightness? [update-> fixed]

  Post edited by: kaelan002

  And when you restart your computer your laptop connects to the network of some?