Satellite A660-1CJ - 8.1 Windows crashes - BSOD bridge.sys

Similar Questions

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Satellite A660 - 11 M on Windows 7, Toshiba Power Saver does not work

  I have a Satellite A660 - 11M and I'm working on Windows 7 Ultimate

  The problem is that I download all drivers and updates but the toshiba power saver does not its installed without error and TPSLaunch (green icon) does not open when I click on it and no icon, I found in the control panel for the afterIi program do not install the package any added value!

  Under Win7, it works a little different. TOSHIBA Power saver is part of the advanced settings ower.
  Enter the power management you are using and click on advanced power options. There you should find Toshiba energy savings.

• After loading Windows - crashes BSOD on Portege A200

  Portege A200 Windows XP;

  Before windows has finished loading a blue screen appears and the machine stops. Prior to that, the machine was intermittenlty off without apparent reason. The last thing I did before this happened has been updated to IE 7. Ran scandisk, but has not fixed anything.

  Can start in safe mode but impossible to uninstall IE7 in safe mode. The option selected to load windows last config that worked to option, but windows crashes before the end of loading. Restoration of the system to consider the return to January 08 but still the same problem.

  Any advice would be appreciated.

  In this case, I would recommend do you a clean installation of OS. As you can see that nothing done. I don't really know what you can try, but I really don't think that you will be able to do anything.

  Save all your data important and make the clean OS installation. I know it's quite radical solution but, believe me, one that suits.

• Problem Windows 7 BSOD NDIS.sys

  I have a problem recurring BSOD but only specific to a particular Dell model laptops.

  I downloaded the file minidump here. In this file, all I could see is reference to the NDIS.sys file. But do not know what to do to solve the problem.

  http://1drv.Ms/1KjvesS

  Can someone please? I've updated my LAN, the wireless drivers. And the problem still persists.

  Help, please

  Hard to tell given that it is build 10532 and there is not a description full for this build yet, BUT it seems to be linked to vna.sys from Check Point Software Technologies.  Yours is dated 2008.  I would remove Check point

• Satellite A660 crashes

  My Tosh Satellite A660 - 11 M PSAW3E (Windows 7 Ultimate) was working fine until I installed the MS security updates March 2012, which included the updated for Microsoft Office Pro 2007. After installation, he immediately started crash shortly after starting upwards and the Action Center kept saying that he did not have a new power driver.

  I used the system restore to restore to the rear for just before the updates and which seem to help - the Action Center, said he has no problems - and the system seems to be OK. Some of MS Mar 2012 resettled and returned crash problem updates.

  I used the system restore again to return to the State of pre update. However, despite his return to the State to update pre and manually uninstall the Office 2007 Pro update, my A660 continues to suddenly crash at intervals frequent, but different - sometimes, it's OK for an hour or 2 and other times it crashes within minutes of boot upward.

  Ideas and help would be very welcome because I am pulling my hair over this.

  Hello

  Have you tried the HARD drive recovery process or have you tried to restore the system using the recovery disk?
  Do this!
  I can't believe that you can not use some MS updates because of this problem

  Retrieve the computer laptop back to factory settings and check how would go to the laptop.

• Satellite A660 - Windows 7 startup problem

  Hi, I have I think the biggest problem I have ever had. I have the Toshiba Satellite A660. I have Windows 7 ultimate 64-bit (just to know.) Computer laptop freezed so I pressed to shutdown (stop) to close.

  Then I tried to start it but I saw only "starting Windows" for more than an hour... When I tried to use the repair disk I saw the Green loading bar only (such as loading windows XP) but nothing happened again. So I tried to use the installation disc, but I get a "windows start" and nothing happened, even with a USB tip.

  Could someone help me?
  Thanks for all the posts.

  I understand that your computer was working and running W7 64 bit.
  You can or you looked in the BIOS? I don't know what you can view/change but is the HDD displayed and if memory is reported?
  If you use the drive of W7 or reinstall to start the computer drive can you get to the screen install Windows and select "repair your computer". If you do not see this screen, you will need to make sure that the DVD or USB is the first boot device.

  Return to this stage for more ideas or google for something like "windows command prompt repair 7.

• Satellite A660 - Webcam not found at all

  Hello

  I was wondering if someone could help me please. I tried to use the webcam on my Satellite A660 PSAW3A 0TK00R using Windows 7 32 bit. When I open the Toshiba "Web Camera Application" application, the application will not load again and he says to the camera cannot be found.

  When I try to use the web cam on another application like Skype, webcam for TOSHIBA Analog Capture (Dev1 path2) he has said "unable to start the video. Try closing other programs that may use your webcam "."

  I tried to download the Toshiba Web Camera Application Webcam 1.1.1.15 Windows 7 32 bit 28,78 MB of the Toshiba site and who does nothing after she extracted. I followed the extraction to the temp directory and tried the file setup.exe. It uninstalled the Web camera Application. Restarted the computer, and then run Setup.exe and it reinstalled the program.

  After doing this, the problem is always exactly the same. I looked for the driver in Device Manager and you can not find a driver related to the webcam to restart. Anyone have any ideas on how to get the webcam working?

  Thank you very much

  Nick

  Hello

  I recommend a new installation driver webcam

  This means that you need to remove the current version of the driver for the webcam (Control Panel > uninstall a program) and then restart your computer. Use Ccleaner or another registry to remove bad registry keys and restart again. Then install the latest driver for the webcam that you can find.

  Check this box!

• Satellite A660 - custom install from the recovery disk

  I like my windows costs. I do not have programs that I don't really need. I tried to uninstall some of them, but they always leave unexpected pieces behind them. So is there a way to stop the factory reset on A660 before installing drivers and other software. So I can install the readers updated and the programs I want to.

  I noticed that I can leave the program that installs Windows regarding the Office when using ctrl-alt-delete. Thing is that it will start again once the computer restarts then I have to remove this program from loading at the beginning upward. Can anyone share ideas?

  I would be really nice if Toshiba allows us to decide what kind of programs that we have in our computer.

  Satellite A660 97u model. Windows 7.

  Hey,.

  I put t think its bloatware. It s tools can you FN keys, webcam, etc. Laptop with a lot of material requires a lot of drivers and software. In addition, you also get a large number of tools that makes computing easier, like Toshiba Bulletin Board software, burning, etc.
  If you remove it n don't like this software, but it s kind of Toshiba to deliver these software with laptops.

  But to answer your question: custom installation is not possible because the recovery disk contains a ready image of factory settings, no single file.
  This is why you must use a Microsoft disc.

• Satellite A660 - format 500 GB HDD to make it bootable clone

  I have a Toshiba Satellite A660 PSAW3C-047017 running Windows 7 Professional 64 - bit.

  I bought a 500 GB Momentus XT in December so that I can clone (bootable clone, not recoverable image). I just bought and installed Norton Ghost 15, but he can't see the player, which is connected to the laptop via eSATA. Disk management says I need to initialize the disk. I can't find an explanation of what exactly the means of initialization. What is exactly?

  Various discussions of the forum say contradictory things about the effect of the end of initialization (if it destroys the data):

  http://superuser.com/questions/283930/will-initializing-disk-make-data-unrecoverable
  http://www.SevenForums.com/hardware-devices/29199-hard-drive-initialization-question.html
  http://answers.Yahoo.com/question/index?QID=20080214215647AAYFNGS

  Since this is a new HARD drive, I think that I don't have to worry about that?

  Choose the MBR (Master Boot Record) or GPT (GUID Partition Table)?

  Finally, maybe it's a bit specific Seagate for another thread, but I'll put it out there in case anyone can sound. I read that the Momentus XT has some built-in intelligence to prevent degrade them performance with the limits of partition alignment issues when Advanced Format is used. He also announced an integrated intelligence keep more frequently accessed content in the part of the SDS of the HARD drive. Will one of these to be "spoiled" by the init or the wrong partition style? What formatting, is there anything to be careful?

  > I just bought and installed Norton Ghost 15, but he can't see the player, which is connected to the laptop via eSATA. Disk management says I need to initialize the disk. I can't find an explanation of what exactly the means of initialization. What is exactly?

  You may need to add the SATA driver for the HARD disk.
  The laptop supports the SATA controller and the SATA driver files are part of the Intel Storage Manager.

• Satellite A660 - 190 (PSAW0E) some problems after BIOS update

  Hey,.
  After updating the BIOS for my Satellite A660, I have some problems with toshiba apps 2:

  * 1. HWSetup - is not working. When I try to open it there is an info: *.

  + "Microsoft Visual C++ Runtime Library
  + This application has requested the execution to terminate in an unusual way. +
  + Please contact the support team of the application for more information. » +

  * 2. FN key is not working *.
  (a) after the installation of the package of added value + Toshiba Wizard cards Flash Utility
  * When I hit FN keys I don't see the keyhelper on the screen, pressing FN + F6 or F7 or others - there is no action
  * the keys are not working and I can set up and then

  (b) after uninstalling VAP + Assistant Toshiba + cards Flash Utility
  * When I hit FN key I still don't see the keyhelper, but I can change for example brightness by pressing FN + F6 or F7
  * the keys work correctly, but I can't configure the

  Anyone can solve this problem WITHOUT having to reinstall the system?

  Toshiba Satellite A660-190 (PSAW0E)
  Microsoft Windows 7 Home Premium

  Hello

  Try this:
  -Uninstall the VAP and Flash memory card Support utility
  -Install CCLeaner and clean the system and register using this tool
  -Now reboot the laptop and install the latest version of VAP. Use the VAP Advanced installation option and check if all the components of VAP are checked.
  -After installation of VAP, restart the laptop and test the FN keys.
  -If the FN buttons would not work, install Flash memory card Support utility.
  -Restart and test

• Drivers updated on Satellite A660 - 11 m

  Hello guys

  My first buy Toshiba and it looks nice, but I found problems that I don't know how to deal with them Toshiba Bulletin Board asking me to install the new drivers many times who I am 1 by 1 at the end when I download the drivers after their installation didn't work and continue to do the same thing whenever asked me the same drivers.
  Since I bought it I look forward to the keyboard on the left side where caps key and s w d a q keys is normal not safe
  How to change my computer make it better because I feel my computer trying to save some power and I always use my computer at home where plug it into the wall.
  I think my computer is slow, and I have I7 don't know why.

  Satellite A660 - 11 m
  -Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) - Intel Core i7-720QM processor-DVD-RW SuperMulti drive (Double Layer) - 4096 MB (2048 + 2048) DDR2 RAM (1066 MHZ) - 40.6 cm (16 in.) TruBrite® HD (1366 x 768) display high brightness with backlight LED and 16: 9 format

  Hello

  First of all, I must say that you can ignore these messages to update the driver. If you n t notice no problem you can always use the old drivers.

  To save energy, you must use the Eco Mode on your laptop. As far as I know Satellite A660 has a key of Eco, if you press it, Eco Utility will start and save energy.

  In addition the preinstalled Windows 7 Toshiba is already configured for better compatibility and good performance. You can install and do what you want, everything is configured properly. :)

• Satellite A660 - how to change the 32-bit system too 64 bit

  Howdy!

  I bought a new Toshiba Satellite A660 i7-2630QM with windows 7 Home premium.

  My problem is Toshiba includes instructions for the first start upward, and he said: I can choose between the 32-bit operating system and 64-bit operating system, but when I turned on the first time he didn't give me any option/choice.

  Now ive got 6 GB memory and can use 4 GB because its too 32-bit system set is an easy way to change it because I don't have a windows disc, all the software is preloaded?

  Hello

  I think that this info is mentioned in the user manual.
  First of all, you can create a with the image of Toshiba recovery disc.
  You must create this disk using the preinstalled software called Toshiba recovery disc creator (or creative recovery Toshiba).

  In addition, there should be a possibility to recover the laptop using the recovery of HARD drive.
  During the recovery of HARD drive, installation should provide an option that allows you to choose between the 32 and 64 bit.

  But just one question: what A660-xxx you have exactly?

• Satellite A660 - wen of video streaming VGA driver crash

  Satellite A660 - my computer hangs and the VGA driver crashes and then recovers when I watch Youtube or any other streaming site. I think that there is a problem with VGA drivers. I have Windows 7 64 bit. Rarely, windows get completely frozen and must be started cold.

  Friends of ideas?

  Hey,.

  Yes, sometimes I read on these issues here in the forum, but the solution is simply: update the display driver!

  You can download the latest drivers for your laptop from Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before installing the latest version I recommend to remove the old first and restart your laptop. Then you install the most recent.

  I hope it works :)

• Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

  Dynabook i7 3D laptop A660.

  OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

  Other wise works perfectly.

  It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

  When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

  I.E.
  If I press 1, 2, 3, its ok.
  But
  If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

  I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

  Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

  Any ideas?

  Hi Roger,
  My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

  I m wondering how you installed the 8.1 to win on this laptop?
  You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

  Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
  [Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

  In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
  When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.