Satellite A660 - how to change the 32-bit system too 64 bit

Similar Questions

• Satellite A500 - how to change the LED display?

  Hey.

  Does anyone have guide how to change the display LED of Toshiba Satellite a500?
  I tried irisvista.com but there is only a guide how to replace an optical drive in this model, but nothing on the screen.

  Thank you.

  Don t always start a new thread on the same topic.
  Please follow the firstto:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53875

• Satellite P10 - how to change the HARD drive?

  Hello

  I want to change my Satellite P10 for a bigger HARD drive.
  But I Don t know how to remove the DvD drive.

  On this laptop, I mean that the HARD drive is under the DvD drive.

  Please help me, if you know how to change the HARD drive.

  Welcome them

  Mister_X

  Hi Frank,.

  I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

  The hard drive is fixed with 4 screws (2 on each side)

  HTH

• How to change the graphics BIT DEPTH in the casting director? 32-bit to 8-bit?

  How to change the depth of the image of Member on a 32-bit to 8-bit cast?

  Imagine that you have an image in the castmember, named "yourface.
  You have checked the depth in the message box:
  put member("yourface").depth
  -32

  EASY and SUCCESSFUL but:

  Changing from 32-bit to 8-bit BY DIRECTOR

  Edit > convert to 8-bit bitmap > framing
  You will see the image easily changed to 8-bit image.
  BUT IT'S NOT SCRIPTING

  SCRIPTS:

  Member ("yourface"). Depth = 8
  Error! You cannot set this property!
  
  I tried to do a blank image to 8 bits, then copypixel 32-bit image in one, but my face become RED and GREEN.

  How to make the script and have the GOOD RESULT YOU modify > convert to 8-bit bitmap > dithering? Thank you for your help.
  

  Copy of pixels has the property of dithering. Here are a few notes on this topic:

  Using the option to dither with copypixels.

  The copypixels command can accept a property of #Dither option. The two valid values for this property that I know are 1215 and 1969.

  anImage.copyPixels (img, aRect, aRect, [#dither: 1215])

  anImage.copyPixels (img, aRect, aRect, [#dither: 1969])

• How to change the location of system restore

  Hi, I can't understand WHERE W8 stores the System Restore Points that I create, so I created a 500 GB Partition on a disk external DRIVE that I would like to use to save files to the system restore and my question is WHERE in W8 can I CHANGE the location of system restore?
  Thank you for your help,
  Bob

  Thank you guys, so I'm stuck with having food on my 'C' drive
  Now I have to find a way to DEVELOP (increase in size) if the 'C' Drive to accommodate the pints of restore (I think they take a LOT of space).
  Thanks again for your help,
  Bob

  Hi Bob

  As Entegy said, you can set the maximum amount of space that system restore is allowed to use.

  The size of each Restore Point will depend on what has changed since the last restore point was created. Only the files that have changed will be saved in each restore point. Each restore point depends on the subsequent restore points.

  These restore points are also used when you select this option to restore a previous Version of a particular file or folder.

  You can also use the latest cleaning disc to remove all but restore point tool. This will immediately release a lot of disk space.

  Concerning

• Satellite A660 - how I overcame the problem BIOS Setup updated?

  I have a newish (Dec 2010) Satellite A660, brief model PSAW3E number, Windows 7-64 bit.

  TEMPRO tells me that there is a new update of the BIOS available. I downloaded the bios-20110124091612. However when I run the update fails. I have the redownload and try again and get the same error. The error is:

  A pop-up window and in the banner of the very high it states: installation UEFI Winflash 0.02. The error message in the window is:

  "There is an error occurred, please check below the elements."
  The version of the BIOS above 190.
  Battery capacity over 10%
  AC is fixed. »

  The only option is to select the "Finish" button

  Is that what is anyone able to help?

  Concerning

  Red kite

  Hi Red

  I n t have this model of laptop and cannot test BIOS update but I want to tell you that the update of the BIOS is not necessary if your system works well. If your system works well und stabile don t change anything.

  In any case, I hope that someone with the same model laptop can confirm this error happens on this model of laptop.

• Satellite A660 - how to enable the nVidia Optimus technology

  Hello

  Is there a solution to market the technoogy optimus in my notebook?
  I have intel i3 330 m and Geforce GT 330 M - and the two are bound by Optimus, but find it deosnt work at all :/

  No, my short model is Satellite A660 PSAW3E.

  Thank you

  Hello

  Announces AFAIK, Optimus technology is fully automatic, allowing you to experiment with longer battery life.

  Optimus whitepaper
  http://www.nvidia.com/object/LO_optimus_whitepapers.html

  But I guess you need the nVidia Driver from the original graphics card.
  The Toshiba driver is changed for mobile use. It supports thermal protection that protects the GPU from damage.
  Drivers graphic originals don't support such function.

  However, Toshiba laptops are equipped with an ECO utility and this tool allows you to save battery power as well.

• Satellite L650 - how to change the language of the BIOS?

  Hello
  I had received as a gift a portable Toshiba L650, and I see that the BIOS is in a language other than English.
  The OS is in English, so no problem.
  The BIOS is in Swedish, because a friend gave me her laptop.

  * How can I change the BIOS language? *
  Y at - it an option to do? or do I have to 'wash' (not really understand what that means)?

  + HELP! +

  Thank you!

  Hello

  Most of the BIOS versions included a language option.
  Turn on the device, press F2 to enter the BIOS and on the first page, you should see an option to change the language of the BIOS.

• Satellite A100: How to change the BONES of German as a language English

  I bought the A100 notebook in Hamburg, Germany. Need the operating system with the German language. How do I change the language of the English system.

  Hello

  The easiest way is to install the full version of Microsoft on English. All necessary Toshiba stuff, you can find on the download page of Toshiba. Here, you will also find document with the command of facilities installation instructions.

• Satellite C850 - how to change the boot order in the BIOS?

  Hi guys,.

  I just bought a C850, and KIS2013 has made a recovery on a USB facility. But how do the machine to boot from the stylus, I can't find any way to get into the bios to change the boot order. I have been Googling all day and tried all methods I found recommended, non of which worked.

  Thanks in anticipation,

  Ray

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  You will find the possibility to enter the BIOS settings.

• Satellite P300 - how to change the volume of the PC speaker?

  Hello

  I have a P300 PSPC4E and I have a problem with PC speaker (I use Vista, but also tested XP on the HARD drive second). When I change the volume (for example) - then - after that it's a very loud beep.

  This also happens with AntiVir. When there is a warning tone - it is very very strong. Does anyone know a solution, how to fix it (and make it a little quieter)?

  Hello

  I know in the sound settings you can turn it off in all.

• Satellite A300 - how to change the language of Vista in English or Spanish

  I bought a laptop * Satellite A300 * with Windows Vista Home Premium in * Italian *.
  I can update the operating system in * English * or * Spanish * or I should I buy a new license of Vista.

  Thank you

  Hello

  You can buy a complete Vista operating system and the new license.

  On some version of Vista (Ultimate, Business) it would be possible to install a multi language package allowing to change the language of the OS, but you can do this by using a Vista Home edition.

  Welcome them

• Satellite C - How to change the power settings for the WLAN?

  How can I change how not having the power cable plugged affects the performance of my wireless network?

  Basically, my wireless works well when the power cable is connected to my laptop, but when it is disconnected from switching between web pages takes a lot of time and the signal is lost and must be restored each time between each Web page. Is that what I can do about it?

  Hey,.

  You can find the WLAN Card settings in Windows to energy saving power management:

  How to manage Windows power management features:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

• Satellite L300: How to change the language of Vista

  Hi all

  I'm no expert, but my daughter bought a Satellite L300 in Germany with Vista Home Premium preinstalled in German!

  It is possible (and easy) to change it in English.

  Thanks in advance

  Well, it might be possible to change that, but it's not easy!

  First if you want to change the language of the OS, you need to download a Pack of MUI (MUI) on the Microsoft Web site.

  Unfortunately these Multilingual User Interface Pack is only supported by Vista Enterprise and Ultimate for Vista. So if you use the Home Premium version you will have to upgrade to Vista Ultimate and then to install the MUI or you will buy an English copy of Vista.

  Welcome them

• Satellite L305 - how to change the function of the media player keys?

  How can I change the function of my buttons in Media Player on top of my laptop?
  I know that if you go to Toshiba Assist, optimize, Support Button, you can change the function of certain keys, but the only options I have are the keys Mute and the CD/DVD.
  [http://img52.imageshack.us/img52/4572/toshibabuttonsupport.jpg]
  I am trying to make the button media player opens iTunes, not WMP and even for play/pause, stop, fast forward and rewind.

  Even if I'm here, I have a problem with my Ctrl + 1 never work. I can't spend the first tab of firefox or aim. I can't do a group control 1 when you play. Anyone know why/how can I fix it?

  Hey,.

  If you press the button on the media player, only Windows Media Player or DVD Toshiba player can be started and not iTunes. This configuration is not possible. As you can read in the user's manual, only these programs can be started.
  Then the other multimedia keys work correctly, and you can use it with media player?

  Concerning your other question:
  I would try to clean the cooling system using a jet of compressed air. This can blow the dust cooling fans and, therefore, it of not necessary to disassemble the laptop.