Satellite A660 - BIOS update problem

Similar Questions

• Satellite A660 BIOS update error

  Tried to run the update advised by Toshiba but encounter the following error:

  «There is an error occurred, please check below the elements.»

  2.20 highest BIOS version
  Battery capacity over 20%
  A/c is attached

  BIOS confirmed: TOSHIBA 1.80 14/09/10 on the system with SMBIOS: 2.6

  Any ideas on what to do?

  Hello

  As far as I know you get this error if you are using an incorrect BIOS version.

  What Satellite A660-xxx are you?

  The European driver Toshiba page provides a BIOS v2.10 but only for Satellite A660 * PSAW9E * series.

  Please check this!

• Satellite L300 BIOS update problem: "what BIOS is not for your laptop.

  I obtained through Satellite L300 laptop and I want to update its BIOS (current v1.50), so I downloaded the bios update v1.60 - WIN and when I run the extracted PS10160M.exe file - I get a message that "this BIOS is not for your laptop.

  What I am, I am doing wrong?

  PS: that updating the BIOS was suggested automatically after registration on the Web from Toshiba site via the serial number.

  UPD: it looks like autosuggestion fail: manual search shows that bios update 1, 60-win is not suitable for the model Satellite L300 PSLBCE. :-(

  Hello

  You used the wrong BIOS!

  The European driver Toshiba page provides a BIOS for this Satellite L300 PSLBCE series and the latest BIOS right now is 1.50!

  Currently, your laptop uses the latest version of the BIOS.

• Satellite A660 - BIOS update error message

  Just tried to update BIOS and get the following error message:

  Installation of UEFI winflash 0.02

  The program will be closed

  There is an error occurred, please check the items below
  BIOS version more than 200
  Battery capacity over 20%
  AC is attached

  Anyone have any ideas?

  HI ifw,.

  Can you post more information about this behavior? What version of BIOS you are using at the moment and what BIOS update you try exactly?

  BIOS update requires administrator privileges, so you must run the update as an administrator. Also unzip all the files to zip archive before you start the update.

  May I ask * why * you want to update the BIOS?

• Satellite A660 BIOS update link does not work

  Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
  Unfortunately, the link does not work.

  I hope someone reads this part of the administration of technical assistance.

  Hello

  For PSAW3E:
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

  Run as admin.

• Re: Satellite L850 - BIOS update problem

  Hello

  I have problem with my laptop Toshiba Satellite L850 (PSKDLA-0C900R). When upgrading the BIOS to 6.1, there was windows pop up with error

  "Flash process will end!
  Current platform have secure start capability, it must provide the location of storage interface IHSI NV.
  Please contact BIOS OEM enginner to add functionality... »

  I pressed OK on this error and it upgraded the BIOS, but now I can't change any option in the BIOS, I can get into the BIOS settings and can see BIOS options but it does allow me to change a

  for example if I want to change the boot order, I can go into the BIOS and can see boot order but cannot change or select one of the options

  I use Win7 64 bit

  What should I do?
  Help, please...

  If I m remembering well updates to BIOS version 6 is designed for Win8.
  If it is not necessary to don t change anything.

  You have problems with your machine?

• Satellite C660 - 13r PSC0LE - BIOS update problem

  I bought the Satellite c660-13r 11.05.2011

  After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

  NOW I HAVE A BIG PROBLEM.
  1 POST takes 30 sec,
  2 start windows is slow
  3. laptop is so slow I can cry!
  4. when I open the new window or klick simply open the new link, stay for 3-4 sec

  and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
  I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

  How can I flasch BIOS with other versions,
  His big problem to work

  Thank you and I hope you can help me...

  Hello

  The version of the BIOS should be mentioned in the BIOS settings.
  Turn on the device, press F2 and verify the version here.

  Also I recommend the settings of the BIOS back to default settings.
  In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
  Restart the machine and check how many processes are running in the context of the BONE.

  I recommend disabling of certain non-essential processes in msconfig.
  There, you can go to the Startup tab and could uncheck the unnecessary process.

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Satellite C855 - 19 X - BIOS update problem

  Hi all

  I have a Satellite phone C855 - 19 X and the alert tempo TOSHIBA utility prompts me to update my BIOS. However when I am doing so I get the following message

  "Error".
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1"

  Does anyone have any experience with this kind of problem? Should I add this parameter, or is otherwise around it? Because the BIOS will be affected I hesitate to do so.

  Thank you in advance.

  Hello

  First of all, you should know that the update of the BIOS is a sensitive technique and using wrongly you can damage the motherboard. So be sure to always update the BIOS.

  Second, the update of the BIOS is not quite necessary in case your laptop runs correctly.
  You have problems using the laptop? Isn't it? Well, in this case I wouldn't touch the BIOS.

  However, the error message is telling as secure boot
  Secure boot is an available option in the BIOS settings. You should probably disable secure boot before running the BIOS update file.

• Satellite R630-130 Bios Update problem 1.90

  Hello.
  Find it me difficult to update the BIOS 1.90 because I got the message that I had permission to run the update. Of course, I executed the request made by the administrator and try several times to restart Windows (Home prem 64 - bit). The last time when I installed 1.80 BIOS update there was not this sentence. Attach the screen with the message from the application.
  Thank you very much.
  [http://img692.imageshack.us/i/55171457.jpg/]

  In my opinion, there is a problem with Win7 version you are using. Maybe it's not enough to run as administrator, but you must be logged in as an administrator.

  Please check it out.

  By the way: why do you need new version of BIOS? Is there a problem with your laptop?

• Satellite U500 - 1-8 - BIOS update problem

  Hello

  I have a problem with * BIOS * update on my Toshiba * U500 - 1 d 8-PSU9ME *.
  Currently, the BIOS is + v1.50 +, but on this page http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU
  I found the new version + v1.90 +. (I know that the BIOS update should be made not when any problem occurs, but I occasionally some problems on startup etc...)

  When I run the update * UBIOS.bat* that nothing happens, but the thread * WinFlash.exe* is running on background.

  What can I do? I found this manual http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm, but it is not useful.
  Any idea?

  Thank you
  Concerning

  Hello

  If you have downloaded the BIOS v1.90 so you need to unzip (uncompress) first of all, this package. Inside the packaging, you will find the BIOS190.exe
  You must run this exe file.

  You say that WinFlash.exe is running on the background. Well, try closing this process and start then start the update
  You can also reboot the device and might try to start the procedure once more

• Satellite 1130 Z24 BIOS update problem.

  I have download the proper file, but saves it as tw30170w.rom. How do I run it? Windows does not recognize it.

  Brian

  Hello
  I would try it with the traditional Biosupdate.

  Download bios here-> http://eu.computers.toshiba-europe.com

  Watch "Support & downloads", click on "Download Bios" a choose your model

  How to upgrade the BIOS

  Satellite 1130

  1.) extracted the zip file containing the BIOS upgrade to a temporary folder.
  2.) insert a 1.44 MB diskette formatted in the floppy drive.
  3.) Execute the file *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated.
  4.), make sure that the laptop is plugged into the sector.
  5.) turn off the laptop.
  6.) place the floppy disk containing the BIOS upgrade in the floppy drive.
  7.) turn on the laptop with the F12 key.
  8.) the BIOS boot menu appears. Select 'Removable Device', 'USB Floppy Drive' or the diskette symbol using arrow keys. Press "enter".
  9.) the Notebook will start from the BIOS upgrade diskette.
  10.) the BIOS update will start automatically.
  11.) after a few minutes the laptop turns off automatically, remove the disk and do a restart. If it does not then remove the disk and turn off the system and return to restart the laptop.

• Satellite C660-13R - BIOS update problem

  Hi all

  I was updating the BIOS on TOSHIBA SATELLITE C660-13R of 64-bit windows 7. Downloaded driver toshiba web. To halfway the portable installation hangs. I left it for 40 minutes to run, but he did not return to the normal state. As the motherboard fan began to move at high speed, I decided to take out the battery. Result when I power my laptop back I 1 beep from the motherboard and a black screen.

  Can someone help me please?

  Of course, the BIOS update procedure has not. Something was wrong during the update process and it seems that the EMRPOM module was not properly flashed.
  This is the reason why the laptop is no longer.

  Possible solution?
  Well, if EMPROM isn t damage, it should be possible to re-flashing the BIOS module once more, using special version of BIOS and crisis disk BIOS.
  Usually the authorized Toshiba maintainer in your country should be able to re-flash of the module using this disc of crisis.

  I also read in this forum that some people managed to re-flash EPROM module using some 3rd party crisis disk found somewhere in the internet but it still does not
  The ASP will therefore probably be your last resort

  However, to use the forums advanced search option to find related discussions on the crisis disk BIOS could be interesting for you

• Satellite L100 doesn't boot up - BIOS update problem

  Hello world

  I was running the BIOS update I downloaded on this site, when the system hang.
  After a while I had to unplug the power cable to turn off the laptop.

  It seems that the BIOS got corructed.
  Now, I turn on the computer but the screen is always black, lights are green all the time.

  I tried pressing F12, F2 by turning on and nothing happen.

  Please help me if you can. Thank you! Albert

  I agree with the user above.
  It seems that something was wrong during the BIOS update process and now only the ASP can help you.

  I would recommend contacting ASP, guys in your country and ask for later handling.

  Good luck