Satellite A660 frozen during Initial start-up

Similar Questions

• Satellite A660 crashes during games and recovery

  I have problem with my Toshiba Satellite A660. Sometimes when I play it freezes and I can't even move the pointer that all freeze them then I have to stop with force.
  Once it freezes during a restore and that what do me worried about would be a secondary problem (amount of money).
  I tried to take it to one that he calls himself a Toshiba service company and they told me that the problem is solved, but he didn't.

  So I hope that everything would be help me I m in a bad situation here.

  Hello

  I understand your situation but to be honest, I put t know how to help you.
  I put t know what that solved the service and what they did with your laptop, but what you can do is to install the OS by using the recovery image (on DVD or HARD drive) and to monitor closely what will happen in the future.

  While gaming, don't forget your laptop is placed on the desk and the cooling fans should not be stuck with a few Pater, books or anything else. before you start the game go portable high performance power plan and check that cooling in this plan of the power method is set to the maximum level.

• Satellite A660 - keyboard and mouse start clicking on self

  Hi all

  I bought a Satellite A660 yesterday, and he begins to show a problem with the keyboard and mouse as well. The two begin clicking one for himself, and after some time, stops, but again. I did all windows 7 updates but didn't solve.

  Anyone know what I can do? Regardz Alex

  I recommend you to install the recovery image again (recovery disk with F8 at startup option).
  After that do what you will get new out-of-box state. Do not install the updates. At first check to see if the problem persists.
  If so, contact your dealer as soon as possible and ask for Exchange.

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Satellite A660 3rd party WLAN does not work

  Hello

  I had a problem with my WLAN adapter so I used to replace.
  Currently, I have installed card Broadcom Dell Wireless 1397.
  It has been defined by Device Manager and drivers have been installed.
  But it is impossible to turn on the WLAN.
  When I click the buttons activate WLAN, it just back to the OFF position.
  I also use Windows 10.

  Thanks in advance!

  Hello

  I own Satellite A660 - 16 M. Initially, it was equipped with Broadcom BCM4318 WLAN card. I decided to replace it with an Intel Centrino N-6230 dual band with 3.1 Bluetooth card. Replacement process was fairly easy, the problem was to make the new card working group. I use Windows 10 as an upgrade to Windows 7 Home. As you can imagine that the utility flash cards stopped working after the upgrade of the system, but Windows 10 has managed to cope with BCM4318 since the original drivers and Windows 7 registry entries have been always working in the background. The WLAN button above the keyboard worked, was so orange the LED in the front of the laptop.

  Situation changed completely with the new Intel Centrino 6230 N WLAN card. Despite he properly recognized by device with all the necessary drivers automatically responsible manager, I was unable to have the WLAN button and the LED orange work which is to turn on the radio (the card WLAN itself, its possibilities of wifi). The weird part is that the Bluetooth worked without any problems.

  The solution was to put a small piece of electrical tape on the 20 PIN of the new WLAN card to prevent WLAN DISABLE State presented to the motherboard. So RADIO WLAN is always on, so Windows 10 own wifi tools were able to switch on the WIFI network and... I see now all (2.4 GHz and 5 GHz) wireless networks. Of course the WLAN button and the orange LED still haven't work (it seems that it is somehow hardcoded to support only the original BCM4318) but I don't love about it. The most important is that I'm now a lot more capable wireless network inside my laptop card.

  I hope that the solution above works in your case, 8stack. Watch the attached files to see what she looked like, as in my case.

  Best

• Satellite A660 - upgrade with keyboard backlight

  I have a Toshiba Satellite A660-141. Initially, it was without backlid keyboard, but I recently bot a replacement with feature backlit for my laptop, but when I connect all backlit do not work... Can someone help me to activate it? All the world has the same replacement?

  http://1drv.Ms/1grM9M8

  Hello

  I have this model of laptop, but AFAIK this light in the BIOS option is for function buttons. With this option, you can enable/disable illumination for these buttons.
  In my opinion it has nothing to do with the keyboard.
  Mobile phones with keyboard backlit have BIOS option for keyboard only and you don't have it so I think that it is not supported by the BIOS and upgrade is not possible.

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Satellite A660 will not start again until I turn safe mode

  Just buy the toshiba Satellite A660: I tell the story to compensate closely in my answer, I hope...

  I just buy new, run the Setup for first use. When its up and running only in that day, that I noticed it start to hang up when I plugged the drive external hard for some Installer (adobe lightroom).

  Its still very well, but when I disable it, it does not start again until I have run in safe mode so I can save some files and rerun recovery.

  This time on 64-bit. With its completion of its process, this works well for a few hours.
  He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  Now when I turn it off it never early return time windows say... Startup Repair. ..
  I have let it run from this morning till now they can't always find what's the problem (I'm refernce the loptop).

  So no idea about whats goin?

  > He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  64-bit operating system is better if your computer supports 4 GB or more of RAM.
  Why? Because 32-bit Win recognizes max 3.2 GB, even if more RAM is available.
  It's limitation of 32-bit; regardless of what OS it is; Linux, Win XP, Vista, Win7, etc.
  This is the reason why the 64 bit OS are so popular in the last time

  With regard to the issue of the BONE;
  I recommend that you run a disk recovery again... This means that you need to reinstall the OS usign the option recovery Toshiba;
  During the turning on the laptop press F8, choose fix my computer-> drive HARD recovery

• Satellite A660 - 10 X sometimes won't start - screen black startup

  Hello

  _sometimes_ my Satellite A660-10 x (PSAW3E) usually start.
  I turn it on, you hear the fan coming, on the screen, you see a blinking cursor on the screen in the top left, it kind of more climbs to left and top over in the corner and stops. Nothing happens, after a while, I turn off the laptop.
  If I do this 3 - 5 times then it starts. Sometimes it starts on the first attempt.

  What I tried:
  Reinstall the PC since the partition of drive with Win7
  Out of HARD drive in my desktop PC and CHKDSC running with analysis and correct errors.
  Cleaning of all the PC of dust, fans etc.
  Pulling out / in battery/AC
  Check the memory (RAM)
  Processor power management change the State of the minimum 5% to 100% CPU

  I understand PC, but this day have no idea what can cause this. The only thing that comes to mind is that the partition at the beginning of the disk contains errors that I can't reach because there a boot partition, partition original installation and the rest which is the only one, I can not reach with CHKDSC.
  I heard someone tried changing battery of motherboard (small round), it can it be?

  It doesn't seem to be the disc or the problem of the LCD screen, or RAM memory.

  > I turn it on, you hear the fan coming, on the screen, you see a blinking cursor on the screen in the top left, it kind of more climbs to left and top over in the corner and stops. Nothing happens, after a while, I turn off the laptop.

  Cursor blinking in the upper left is a well-known landmark and could be related to defective RAM or HARD disk memory problems.

  Verification of memory could be carried out, and in my experience, these controls provide memory about the correct results. But even if verification of memory would not find any problem of RAM, it could still be a nuisance RAM.

  Of course, I can't say with certainty, if his RAM related question or maybe its related to other defective part.
  Fact is that this problem is caused by problems of material and in the worst case that the motherboard needs to be replaced.

• Satellite A660 - does not start

  My Satellite A660 rebooted a few times and then it turned off and now it will not start at all, and register there even the packed power connected. It does not work, any help would be appreciated

  Hi liam42,

  What happen exactly when you try to start your laptop (press the power button)? You can access the BIOS configuration, or what exactly?
  You see errors on screen?

  No doubt this might help you:
  Remove the battery and the AC adapter. Then wait at least an hour and then reconnect the two and try to start your laptop.
  It work?

• Initial start-up does not not on the new Satellite L750 Pro

  I recently bought a new laptop of Toshiba Satellite L750 Pro. I connected on AC power and the laptop. The statement said initial start-up can take up to 2.5 hours, however, it has been more than 8 hours and nothing has changed. Also the screen is not that fake black used when the screen is turned on, it is 'off' black.

  Help, please.

  Try to start the installation program once more.
  Turn on the laptop, press F8, choose repair my computer and choose HARD drive recovery.
  Usually the installation of recovery should start once more and needs to be reinstalled the Windows operating system

• How to start on Satellite A660 HARD drive recovery?

  I recently bought by Satellite A660 and the laptop has been infected with can of virus will start any program even couldn't do any disk recovery. So I try to read the FAQS and guidance that I tried to do the hard drive's default factory setting.

  I follow the directions "Press 0 & combination Power button" at the start of the hard disk to recover the system.

  Make a hard drive recovery system still ask for disks. Therefore, in this case there is no solution. Please let me know how I can do hard drive recovery system.

  Thank you

  Can you please tell me what model of laptop you have exactly (A660-xxx)?
  What is this Europe or US model?
  > Making the hard drive recovery system still ask for disks.
  I put t understand it. Can please explain you a little better?

• Satellite A660 - will not start initialize drive HARD failure

  Hello
  first of all thank you for your time.

  Model: Satellite A660 (PSAW3A-07U00R)

  The problem started yesterday, the computer has been going slowly as a closed application, so I held the off button until the pc is turned off. When I restarded the laptop, it went to a screen saying: start windows normally or repair Windows (recommended)

  When started normally it hangs just a blank screen, repair Windows recommends a system restore to a previous point that did not work. As it crashes again. I tried pressing F8 and boot in safe mode, but even once it just hangs. Then, after having repeatedly tried safe mode and another system restore the computer then hangs when I press F8. After that, the computer passes in front of the Toshiba logo with F2 and F12 options screen (which still works) and then it rises the initialization has failed then shuts off and comes with start-up bootfailed failed with a few numbers and letters, then it goes to a small box entitled menu starting with 4 options. These are some
  Toshiba MK6465GSX HDD/SSD
  CD/DVD MAST * UJ141ES ABD - CMB
  FLOPPY DRIVE
  LAN

  If I press ESC, it passes through the loop of bootfailed and ends at the same screen, if I press on enter "HDD/SSD Toshiba MK6465GSX" then he quickly returned to the screen and at the bottom it says [HDD/SSD Toshiba MK6465GSX] failed.

  I do not understand why it has gotten worse over time. Can anyone think why it occurred and more importantly, how can I get my pc working again? Note: held 0 then start does nothing for me atm

  Best regards, Matthew

  Hello Matthew,.

  To be honest, I agree with Akuma and it could be related to a dysfunction of HDD the error you described, but ensure 100% there s no software problem, you should try the Toshiba Recovery disk Windows installation. Something may be confused until the Windows installation and recovery of files on the HARD drive, so it cannot be started. Recovery disc will resolve this problem by formatting the HARD drive and restoring the settings box.

  If it still doesn t it work s hardware malfunction but an authorized service provider can solve these problems under warranty for free. So just contact the guy and ask for help. ;)

  If you have other questions or already solved the problem, please let us know!

• Satellite A660 starts

  Hi guys,.

  First of all, I hope it's in the right place as im completely new to this!

  OK the problem,

  I own a Toshiba satellite A660-1DW and tonight it will not start, well I say it won't start, but nothing doesn't appear on the screen, let me develop:

  Press power it / off button > portable lights > runs for about 30 seconds > nothing appears on the screen - screen remains black or the same State as it is when it is off > laptop turns off by itself

  That's it, I don't know what to do! Is it a fault with the screen? Is - fixable? I have a lot of files/documents, I need, I need a new laptop complete?

  Any help is appreciated, thanks.

  Hello

  You must understand that on this virtual path, it is not easy to say what the problem is here, but if you didn t did something that may be responsible for what to a hardware failure, especially if the laptop turns off by itself.

  Unfortunately I can't say with certainty what the problem, but my advice to you is: contact the nearest Toshiba service provider and to check your laptop. Using specific diagnostic tools, they can find out what's wrong here.

  The files are saved on the HARD drive and all you have to do is to get external 2.5 external enclosure and connect other portable devices such as external device. You will have access to everything that you data.

• Satellite L - Initial start-up, the time

  Hello

  I'm not very tech savyy so apologize if this is a stupid question! But I just bought my laptop today and the Quick guide installation explains that the initial start-up would take 2.5 hours and that the computer might restart several times during this process. Well the first thing I did was load the computer (for an hour), then turned on. Launch seemed to take about 10-15 minutes and it restarted only once.

  Missing something? What is supposed to happen in the initial start?

  Hello

  The initial startup time is always depending on the exact model laptop. Different laptops come with a different software so the initial boot time may be different.

  If everything is installed now and you can use your laptop for Internet and other things don t worry.

  What you need to do now is create the Toshiba Recovery disk first. Start so the recovery media creator pre-installed and you need some blank DVDs (I recommend the high quality DVD-R media). If you have the disks, you are always able to restore the original settings of the case. :)