HP 2009 m Monitor - screen scratches

Similar Questions

• my mouse can always move to a non-existent monitor screen area

  I have a LG external monitor connected via HDMI. When my external monitor is turned off, my mouse can always move to the non-existent monitor screen area. Is there a way to fix this? The mouse works off the screen, that it is difficult to use. Still using Yosemite.

  Unplug the cable from the screen at the end of the MAC.

• Why desktop screen display upwards on the left side of the monitor screen and white is on the right; Properties show nomal.

  Why desktop screen display upwards on the left side of the monitor screen and white is on the right?  When I do my office they show nomal properties.  Everything seems to be normal.  Thank you

  Hi Sdaugherty3,

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor screen Direction - change from vertical to horizontal

  original title: monitor screen Direction

  How can I change the screen from vertical to horizontal?

  Hi Aspen77,

  Welcome to Microsoft Vista answers Forum.

  Let us know the operating system and the video card installed on your computer.

  However, you can try to resolve the problem by following the steps below.

  -Simultaneously press the keys on your keyboard to change the desired setting.
  CTRL + ALT + UP > Normal mode
  CTRL + ALT + RIGHT > turn 270
  CTRL + ALT + LEFT > rotate 90
  CTRL + ALT + DOWN > turn 180

  -Right click on my computer > manage > Device Manager > expand the display adapter option > right click on the map to display > click on uninstall > restart the computer if you are prompted to, or click on hardware changes. It would load the default settings of your display card.

  -Check the advance of your display card properties make sure buttons that allows you to rotate the screen are set by default.

  I hope this information helps.

  Thank you
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv6-3230us, windows 7 64 bit. Colors of the incorrect monitor screen.

  the colors on my HP Pavlion dv6-3230us laptop monitor screen are wrong at the start but will correct on its own after a while (an hour or more).  Initially using the brightness button several times would correct the problem, but now will not fix the problem.  Issue started two days ago and seems to take more time so that it can be corrected with the commissioning upward.  Once he corrects himself he will generally be ok until the computer is closed or off.  This problem is constant regardless of what is displayed on the screen (office, internet, photos, etc.).  Any help would be appreciated.

  Shut down your computer and press the ESC key many times.

  Have shown: Start Menu.

  Click on the F10 key.

  In this screen, the issue showed?

  If do not move the screen back and front.

  Any problem?

  If this ocorred in this screen problem is failure in your flat cable or the display. You have to fix it.

  If not displayed make this updates for your problem:

  Update to the BIOS: http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55299.exe

  Graphic Board Windows 7 64-bit: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52351.exe

  Driver Chipset: http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52355.exe

• When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

  Original title: memory card Problemz

  When I plug my SD memory card into my computer, nothing changes on my monitor screen. How can I download my photos?

  Here's a way to accomplish the task...

  Apparently, you have an external or internal USB media player?

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download the files from here. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the files of your choice in a folder on your hard drive
  drive.

  Just click with the right button on a group of selected files and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

• HP 2311xi monitor screen scaling

  Have a HP 2311xi flat screen monitor and all was fine, until that I upgraded my operating system to Windows Pro 8.0 8.1 Windows Pro and now my monitor screen size about 1/2 inch black screen around all the edges of the screen.  Everything was good with Windows 8.0 and filled the display properly shape edge to edge.  I went to the monitor and under Main Menu display controls; Image control; Customer scale; "Fill screen" and "fill Aspect ratio" grayed out and unavailable. The only option is "Overscan" and who give me 1/2 border black thumb or cause the "overscan" and put the part of the screen available off the screen. In use HDMI as a source of input to the screen, however, I got no problem with is Windows 8.0.

  In addition to return to Windows 8.0, all suggested fixes for this issue.

  Thank you

  BillMNJ

  Hello

  Please mark this thread "resolved" then the other members of the forum can benefit from our experience.

  Thank you

  Jaco

• Monitor screen is stretched horizontally and become Concave past look at a capacity

  I need help to fix my monitor screen. It extended horizontally to the place where about an inch and 1/2 on each side is behind the frame of the screen. A few times I've managed to fix it by clicking on restore previous computer..., but he was keen to return to the concave screen stretched. I've read about perhaps needing a new driver etc. I don't know what it is. I have Windows 7 Professional. The monitor is not the type of flat screen. Help, please? Thank you!

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the computer?
  3. is the question happens while accessing a particular application?

  Try the following and see if it helps.

  Method 1:

  I suggest you to uninstall and reinstall the display driver and check if it helps.

  Uninstall:

  a. Click Start, type devmgmt.msc in the start search box and press ENTER.
  (b) in Device Manager, expand the display driver.
  c. right-click on the display driver and select the option uninstall.
  d. restart the computer and then install the latest drivers from the manufacturing site and check if that helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: Try to connect to another monitor and check if it helps.

  Method 2:

  Get the best display on your monitor: http://windows.microsoft.com/en-us/windows7/Getting-the-best-display-on-your-monitor

• HP 2009 m, black screen, power button / stop lights

  I have a HP 2009 Mr. Windows Vista 64-bit. 4 years.

  I can turn my computer on fine, check e-mail, watch videos, etc. but then the screen will be black. The blue button lights. If I turn off and on. It will work for like 5-10 min or more, then it will be a black screen.  If I watch a video when it goes to a black screen, I can still hear play.  I hear a slight hum coming from the screen that I never heard before that happened.  Is it my desktop computer or do I need a new monitor?

  Hi NSCY,

  The fastest way to isolate the problem to the screen would be, if possible, be: try the monitor on another PC or another monitor to the computer.

  Check your graphics card and the power of the connections on the PC and the monitor also.

  Your graphics card may also cause this problem.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.
  
  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.
  
  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.
  
  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Display exceeds the size of the monitor screen

  Hello

  I just bought a HP 5208uk (without a monitor). Connected to a (digital) TV via vga on a resolution of 1024 x 768 and dvi on the 1080ix60 resolution (two settings came automatically).

  The display of the Office is outside the borders of the screen, regardless of the I use (vga or dvi).

  I tried to update the drivers (pc and tv to date), playing with the resolutions (does not work) and using the Troubleshoot utility that tells me all is well.

  Please anyone know how I can solve this problem, ideally use dvi?

  All the answers, including blind sarcasm, are welcome, and I would be really grateful to be.

  Thank you

  * Bleep *, welcome to the forum.

  Well, I couldn't come up with any brainless sarcasm, but here's an idea on how you can solve the problem.

  I will try to completely uninstall the video driver.  Sometimes, a new facility from scratch can assign problems.  Then, install the latest driver.  I did this job several times over the years.

• (Redirected) Alienware Aurora (end of 2009) and monitor Dell 3715

  Hello

  I have a late 2009 Alienware Aurora and want to add a Dell P2715Q monitor. I don't seem to have the good ports to connect the two. Can someone suggest a solution (short of buying a new computer). I want the solution to allow me to get the HD display on the screen if possible.

  Thank you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I use iMac (late 2009) as a screen for the new Mac Mini?

  I could use my iMac 2009 end as a screen to a new Mac Mini? It was love at first sight, and the other has a mini-Display port.  Although they look alike, should which cable I buy?

  iMac has 8 GB of Ram, El Capitan 10.11.3

  Thank you!

  1. only if it is a model 27 inches, or you set up Virtual Network Computing.

  2. According to what you choose / are able to make, a Mini DisplayPort cable or a regular network connection.

  (140550)

• Tecra A9 - external monitor shows scratches during the use of the computer laptop pluged.

  Hello

  I heard at least Tecras A9 product witch scratches on the external display only 3 when the laptop is pluged. When you use the laptop with the battery, the monitor works fine. they tried to divide the monitor and power cables as far as possible, but still the same problem. When you use the laptop with a non-toshiba-AC adapter, the external monitor works fine.

  Hello

  In my opinion, you should visit the nearest Toshiba authorized service provider. They can plug in your Tecra external monitors and test. If the result is the same, I am sure that you will get free AC adapter replacement.

  Do not wait and discuss the days here. Contact with them and I hope they help you.