Satellite A660 - links BIOS and version history

Just for your information, please find below the complete * A660 BIOS version history: *

_ [Version 1.80 - 2010-10-01 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v180.exe] _
-Limited the speed of DRAM DDR3 - 1333 Mhz to 1066 MHz on the Clarksfield CPU platforms.
-Update: the status SM_SENSE # is maintained during hibernation for the function sleep & music.

_ [Version 1.70 - 2010-09-22 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v170.exe] _
-Fixed: Background becomes empty, and the wrong password will not automatically clear when setting or deleting a user or supervisor password.
-Fixed: System hangs when you set a channel owner of 512 bytes.
-Fixed: When enabled the Fast Boot, DMI Type12 had no data.
-Fixed: When Fast Boot has been activated, the system did not ask passwords system and HARD disk.
-Fixed: When PCI LAN has been disabled, the start menu has reported a network problem.
-Fixed: When the serial number of a RAM module is all zeros, the system crashes.

_ [Version 1.60 - 2010-08-03 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v160.exe] _
-Updated the Intel OSB logo.
-Fixed: Shared allocation of memory on UMA SKU problem.
-Fixed: Blurred logo Toshiba.
-EC-1, 60: reduces the sensor button debounce time to 50ms.

_ [Version 1.50 - 2010-07-08 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v150.exe] _
-Update of the MRC of Intel to 1.3 - 1 for cause of stop start hot.

_ [Version 1.40 - 2010-06-28 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v140.exe] _
-Updated the N11M and N11P NVIDIA VBIOS code base.
-The M13106E5_04 Clarksfield CPU Microcode Update.
-Fixed: The computer may crash if some RAM modules are used in the Computrace platform.

_ [Version 1.30 - 2010-06-09 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v130.exe] _
-Updated the VBIOS N11E of Nvidia for 3D editions.
-EC - 1.30: added workaround for a problem of ALS function after the release of the S4/S5 and reboot.

_ [Version 1.20 - 2010-06-03 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v120.exe] _
-Added: N11E Nvidia for 3D SKU VBIOS.
-Update of the optional ROM of Computrace to correct a problem installing and running SysMark/MobileMark.

_ [Version 1.10 - 2010-05-10 | http://cdgenp01.csd.toshiba.com/content/support/downloads/saw0v110.exe] _
BIOS of initial production of these models.

Hello

I found the same thing on the page of the Toshiba driver we.

Welcome them

Tags: Toshiba

Similar Questions

  • Official Satellite A660 cant get and iTunes-64 updates moved

    Hello

    I've had my laptop for about 3 weeks now and have a few problems that maybe someone here can help with :)
    It's a Toshiba Satellite A660 Windows 7 64 bit, with all the options of support authorized toshiba - tempro, health bulletin board etc.

    Problem 1:
    The chips toshiba Board asked me to update a load of stuff - Bios, display drivers, wireless drivers etc.
    The only update (seems... it did not freeze at least) worked was the update of the broadcom wireless driver.
    So, for the update of the display, I download the file, unzip it and nothing is passes - I have tried to run the tinstallwb.exe.
    I am asked if I want the program to change the hard drive, I say Yes... and that's the last I've heard of it... tried for hours to make it work, but I look at a desktop computer without activity. In the folder to archive, if I try and run the setup.exe (the nvidia part) it says that no valid nvidia hardware has been detected.

    Problem 2:
    I tried the bios update, Bulletin Board asked me to install... it didn't, didn't want to install.

    Problem 3:
    I spend most of the time the laptop turned off, because it freezes on the screen of closing...

    Problem 4:
    Prob not a toshiba problem - but I can not install Quicktime or iTunes... the installer just freezes (it goes in not responing well) - I left runningn elaptop th for about 4 hours yesterday, trying to install itunes 64-bit until I had to kill the task (and turn it off, like shutdown does not work)

    Any ideas, I've given up trying to update the updates that the toshiba Council services told me to put up-to-date?
    I tried the update obvious everything I can, but the toshiba updates do not update :(
    Other software: MS Office and Outlook, firefox.

    Thanks for any help,

    Andy

    Hello

    (1) you can download all the drivers directly from the page of European driver of Toshiba.
    If you really need an update, then you must download the file, should save on the HARD drive should unzip the package and must be run setup.exe or should update the driver from Device Manager.

    (2) this is a HowTo doc on update of the BIOS:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60
    If this is not possible, then your Windows operating system might be confused to the top and maybe you should get the phone before performing a BIOS update.

    (3) as suggested above; all these questions could be linked to the damaged operating system and maybe you need to reinstall the operating system to make it work again.

    (4) see point 3

  • Satellite A660-18 suspended and needs hard reboot

    My Satellite A660-18 crashes every two days about 2/3 times. I can't press ctrl + alt + del and the mouse does not move. I pressed the power button to restart manually. It started about two weeks after I got it in September. I watch a lot of videos online (and offline) and usually after the screen freezes / crashes, audio continues and extends. I thought that it was a problem with IE8, so I switched to Google Chrome, but it still continues. This occurs also in offline mode. Also, after my laptop crashes, the fan speeds up so I thought it was an overheating issue. I bought a carpet of cooling a few days ago, and the system still hangs. I don't know what to do now, can anyone help?

    Intel core i7 1.73 GHz q740
    4.00 GB ram
    64-bit operating system
    Windows 7
    NVIDIA Geforce 310 M 512 MB dedicated video memory

    Hello

    It's not easy to say what causes this but you should check different things;

    (1) reinstall the OS. Dirty registry entries affect the OS eth feature
    (2) clean OS using CCleaner
    (3) check the bars of memory. Run the test using a tool like memtest86 + or similar
    (4) check the HARD disk. You can use Drive Fitness Test, which is free.
    (5) update BIOS and other pilots like graphics card driver

    Good luck

  • Satellite A660 - 18 BIOS update & fails (re-visited) HARD drive recovery

    Referring to an old thread from my friends...

    I tried earlier to update the BIOS of v1.80 for v1.90 (whether by the automatic update tool Service Station and the direct download of the update of the BIOS).

    Whenever the update of the BIOS ran, he abandoned arguing that the battery was low (it was not), alternating current was not on (it is) and the existing BIOS version was superior to the new version (it wasn't).

    The real problem seems to be that the version of the BIOS (as shown in "Toshiba HWSetup") is:

    + The BIOS version = V234567890. 00/00/00000000000 +.
    + Version EC = 1.80 +.

    However, in the Diagnostic PC Toshiba tool the BIOS version on the page of basic information is correctly reported as 1.80

    At the point where I couldn't be worth blat my disc with the original image and try again. I was hoping that Toshiba would set the BIOS update to fix the problem. Didn't happen.

    They released v2.00 BIOS in June 2011 and would not always up to date. So I backed up my data and tried to blat of the machine to factory State. What a nightmare...

    The recovery image doesn't work well at all!

    The first bit works (the original partition creation and image copy), but after the startup of Windows and the script factory Toshiba intervenes, all sorts of problems begin.

    First of all, the thing stuck several times in a process of "assessment of system performance. This happens in several phases of reboots because the drivers are installed. Then there's a bunch of bug script error messages and DMI analyze the errors you will need to click on ' close and do not report the crash "type dialog. What makes it more difficult is that the Toshiba factory configuration script sets up a blank page trying to see you on what the bureau is to be avoided. Even if you try to pass in the Manager of tasks to complete the process deadlocked, it gives you a few seconds grace before forcing the Office to lock and hide behind the white screen again. If you're quick and good time, you can stop the evaluation of performance at a standstill (I think it's just the thing to the Windows Experience score). Same thing to reject the other boxes of error...

    Finally, I arrived at the end of the script and the machine was built with all of the original software.

    The program HWSetup still reports the version of BIOS of nonsense and the PC Diagnostic tool always reports it correctly.

    The Service Station program now does not even start. It crashes with a message + "request the Toshiba Service Station could not initialize. Try to restart or reinstall the application. » +. I downloaded the last being on the website and installed... To be hosted later with the same message.

    Program update direct BIOS for v2.00 made his usual thing you ask that the current BIOS version is greater than 200 and abandonment.

    I even read in a FAQ that some recovery routines do not work correctly with more than 4 GB of RAM (I have 8 GB). So I did all of this once again with only 4 GB installed and the script was just as broken for 4 GB 8 GB.

    I ran PC complete diagnosis for machine test suite and it turned up nothing.

    A little confused now... Maybe time to log a failure while I have a few more months of warranty left. But the machine actually works, just can't update the BIOS. Would be my luck if a problem arose just after the warranty has expired, and they said 'just update the BIOS...

    In front of me, I 3 laptop years. Over the past three years, Toshiba has offered 3 BIOS updates. I don t care about it and still use the original version that I got with my laptop. I want to say, why change anything and start this risky If update everything works fine and it does.

    Several times I have read here that people write about the problems of updating the BIOS and damaged BIOS. This risk does not apply to me just having the latest version.

    Anyway, if you want to have all past orders on your laptop, it is without a doubt your legitimate right. In General, the BIOS updates are tested before Toshiba offers for download so I really put t understand why you have this kind of problems. The problem with the installation of recovery is also strange.

    A few months ago, a friend of mine bought A660 and I helped him create recovery DVDs, and we also tested the recovery procedure everything including the three options:
    Back to out-of-box state
    Recover without changing the hard drive partitions
    Get a custom size partition

    Everything worked perfectly so I m really confused about everything you write.

    Unfortunately, I can't help you with this. When I could have your laptop in front of me to see exactly what is happening, it will be much easier to understand all of this.
    I updated the BIOS on different laptops, and I got lucky because every time that everything was fine.

    Your laptop is guaranteed valid so I recommend you contact Toshiba service provider in your country and ask for assistance.
    What do you think about this?

  • Satellite A660 - Tempro alerts and the status of the guarantee

    I have a laptop Toshiba Satellite A660. Windows 7 64-bit.
    First Tempro worked but I have not had an update since October 6 and my warranty status now says
    'Standard Standard warranty Toshiba unregistered'?
    Think this should happen when Tempro advised me on a Tempro itsself update: update around 6 October?
    I registered my guarantee that some moths back, I can not re - save that I am already registered, I can confirm that my warranty is until August 2011 on the toshiba support site.
    I can browse and then install updates from toshiba but not by Tempro. Infact today I downloaded Tempro 3.3.4 and installed.
    TEMPRO is activated and shows my correct series and number of model, but always said that my warranty is not registered.

    Under condition of the guarantee: guarantee offers, help and register buttons all work, but clicking on the button "Refresh" seems to do nothing. If I disconnect my internet and press "update" button there is no percievable difference?

    I'm sure theres no firewall problem, but put exceptions in TemproSvc.exe and TemproTray.exe to be sure.

    I know that Toshiba say wait 5 days for the warranty to show registered but surely that does not mention when you click on the update button, but since time of your registration?
    Which for me was long August/September.

    Hey Buddy,

    Where to check the details of the warranty for your laptop?
    For European laptops, you can check the warranty here: http://www.toshiba-tro.de/unitdetails

    If it s are not correct, you should ask a service provider authorized in your country or contact Toshiba people under [email protected] and explain your situation.

    Good luck! :)

  • Satellite A660-155 freezes and needs of startup repair or does not start

    Hello, in the middle of the month of August, I bought a satellite a660-155, PSAW0E-00U00DEN S/N 5A214647K.
    It is registered under warranty until the Aug2011.
    After less than a week, it refused to start.
    I rang support and they recommended that I use the recovery discs to restore to factory condition. I did and spent the next 3 nights reload software and my backup disk data.

    Since then he refuses sometimes to start the hard drive with a relative error that it cannot rfind and then ask which drive to boot from. If I select the hard drive, it starts later. Sometimes when running he crashes and then restarts.

    Last night, after that it had not been used for a few days, I woke up he "sleep" mode. I logged on okay, but then the blue logo 'circly' comes on, spinning away happily, and nothing else (just for logging on the text). After 30 minutes, I pressed the power button to turn off because the cell phone was totally insensitive.
    On commissioning, I got a white screen for 30 minutes, then the Startup Repair option.
    I launched it and check start lasted almost an hour and an hour, then he said, trying to repair. After a few hours, I left and went to bed. This morning, he showed the guest of logon and connected properly, as if nothing had ever happened.

    I lost confidence in Toshiba laptops, (I am responsible for computer SCIENCE) and I've never seen this problem before on a so-called quality machine. I only ise it fot simple e-mail/internet/word documents.

    All I can conclude is that there is little material defective (hard drive) that stops responding intermittently.

    I sent support at 07:00 this morning, but have not had a response.

    Can you help me? This machine needs ideally replace or repair collection, back in working condition 100% reliable. Could someone please contact me to see where I go from here?
    Under the law of consumption, you have a duty to rectify my sad situation, that the flaw exists again.

    Thank you

    Thanks for the info!
    Seems to replace the HARD drive would solve!

  • Satellite A660 - meter problem and the function of the power keys do not work

    Hi all

    The drop down menu that appears when I pressed on the FN key disappeared as well as when I turn of the backlit using FN + Z, light under the keyboard just turns off but the light beneath logo buttons on it near the power buttons and satellite does not turn off. How can I solve this?

    The computer displays the electric meter error and eco top near power button never lights energy saving does not work. I tried to reinstall the driver of programs/toshiba eco, but it says BIOS not supported.

    Before you try to reinstall the VAP, try to restart the Flash Cards Support utility. Utility support card Flash controls the FN keys and you can restart it in all programs-> Toshiba-> restart Flash Cards

  • Satellite A660 - 11 M and fan speed controller

    Hello

    Is there anyway to reduce the speed of the fan on the A66011m Satellite?
    The fan operates at 67% and makes too much noise for use in an office environment. Is it possible to reduce this?

    Thank you

    Adam

    Hello Adam

    There is a single way to do this. Go to power management and open the advanced power settings for the management of the power supply you use.
    You will find Toshiba Power Saver options and parameters for the method of cooling. Open it and put them in optimized battery.

    This should reduce the activity of fan cooling.

  • Satellite 2430-101: BIOS and many other issues

    Then... I had more than 1 question and I hope someone out there can answer...

    1 - is the new Bios (1, 60 - WIN) supports Hyperthreading? If not, is there an other BIOS that is compatible with the S2430-101?

    2. I want to replace the P4 2, 54GHz with a P4 2 8 GHz (800 MHz Bus, HT). If the Bios recognizes the new processor? The heat problem is not really a big problem for me, cause I plan to underclock (if its too hot for the old cooling system to manage) the P4 to 2.6. I want just the stuff (for example HT) of the new processor

    3. not the BIOS recognize a 120 GB HD?

    4. does anyone have experiences with the MSI mini-PCI combo (Blutooth/WLAN) card?

    5. the S2430-101 got a Geforce 4 420 go 32 MB... I was just thinking to upgrade to Geforce 4 440 go with 64 MB... Is this possible... His chip with several pipelines and so on... Its the same family... Has anyone tried replacing a laptop graphics chip? Perhaps a 'material-designer' Toshiba could give some comments to this :D Hey guys... Is this possible?...

    6 I need more power, I need more mAh: D... Do anyone know why the battery has more than 2 pins? Is there any material in the battery which tells the system information of the battery? If so, is it possible to build its own battery or system requires information from the battery in order to operate. If Yes, where can I get the specifications of this "battery pack material"?

    Thanks in advance... Stryker

    Hello

    I'm not an expert, but I'll try to help: :)

    1. There is no public list where you can read what each update BIOS contains or which issues are fixed. It is always recommended to install later and ONLY Toshiba designed update the BIOS.
    2. I can't give you specific information about CPU upgrade, but as far as I know, replacement of the CPU is often not possible. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and it is used in the interest of the miniaturization and heat dissipation. For more information try to contact the Service partner in your country.
    3. you will be lucky if someone has tested with the same unit. This unit is about three years old and it is not easy to say what is the maximum size of HDD supported by the BIOS. I found the info set comes with 40 GB and you can use 60 or 80 GB HARD drive, and I think that there should not be no problem. If you need more space, you can use external HARD drive (unit has USB 2.0 and data transfer speed will be fast enough)
    4. I don't think you can use any card combo on this device because of hardware architecture. WLAN is here but BT module is missing and you can use an external solution such as BT USB stick.
    5 update graphics card is usually not possible.
    6. sorry but this question is a bit stupid to me :) and I really put t know how you want to use the battery clean.

    Expensive Stryker at the end I just recommend you to buy a new laptop. Believe me it's much cheaper than all your projects for the upgrade. Please think about it!

  • Satellite A660-1DW Bios update failed

    Hello world

    I tried to do an update of the BIOS on my laptop and it failed. Now what happens when you press on the power button is the fan turn upward and the light come on. No screen, no POST and then he died. Someone has ideas how to get out it?

    Unfortunately the BIOS is done and what you need is a professional help. In General, you should contact the nearest Toshiba service provider and ask for help.

    If you have a control to please http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395 which is very thread interesting any similar problem, but the guy at this problem found solution how to solve this problem. Maybe it will help you.

    Check it out.

  • Satellite A660: no light and no beep touchpad keys

    Hello world

    first of all, I apologize for my English, I'm Italian.

    I am panic with my laptop, yesterday I reinstalled everything using the recovery DVD and has already had some problems with the touch buttons.

    Sometimes their light turns on, and they never do the "beep" when I touch them, work of the beep only during startup.
    Here are the main problems: I have already install the latest firmware of fingerprints buttons from Toshiba Web site.
    How can I solve it?

    Last question: the echo utility button light should be turned off when you and just be green when the echo is active, isn t it?

    Thank you very much

    Post edited by: keivan92

    Hello

    The beep occurs during startup as the POST (power self test) was transmitted correctly.
    Usually, the system beep can be changed in the BIOS in Advanced tab.
    In my case there are different levels of sound summer: Off, low, medium and high.
    In my case I put in the Middle, but even if the system beep is activated, the button multimedia don t beep. I guess they should not beep.

    With regard to the light on the button:
    It is called illumination.
    As far as I know in some cases, the BIOS contains this option and you can enable and disable the lighting in the BIOS.
    If the lighting is not available in the BIOS, check this:
    Go to the Program Files/Toshiba/TBS

    You will find the application called dimmer.
    This allows the key light.

  • Option of Satellite A660 - 11 m and battery

    Hi guys...

    My question is that when the round battery is charged and connected and at the same time the cord of the AC adapter are connected to the DC in 19v I can disconnect the round DC power cord and depend on the battery, it is a normal action, I can do it easily... ? or I have to first stop the turn before I can use the battery.

    Just unplug the tro DC power cable and continue to use laptop on battery.
    You should not stop your laptop.

  • Switch signals and Wireless does not work on Satellite A660

    I have laptop Satellite A660 17 M AND I am facing a PROBLEM THAT IS THE WIRELESS DO SWITCH NOT RUN AND did not SWITCH THE WIRELESS ADAPTER ON or OFF
    AND ALSO ON THE TOP OF THE KEYBOARD FUNCTION BUTTONS DOES NOT WORK

    AFAIK, the utility Vap and flashcard support are responsible for these functions. You can try to download and install them

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    Note, first you must install the utility of vap and restart the support belt utility and Visual support cards, then

  • Satellite A660 - WLan Broadcom 802.11n very slow on Win 8

    Hello.

    I have a Satellite A660 PSAW3a 07r00r and my speedtest is usually 12 or 13 MB/s
    After you have installed Windows 8 64 bit, my speed went back to 2 or 3 MB/s.
    All my other computers are still at 12 or 13 MB/s.

    I tried the drivers 64-bit windows 7 as well but no luck.
    It seems to be a common theme when I googled.
    My broadcom driver version is 5.60.48.35.

    Someone at - it solution or something for me to try?

    Thank you, Will.

    Hello

    As I m not wrong the 802.11 standards (B/G/N) WLan wireless card BROADCOM BCM94313 supports.

    What Wlan standard are you using exactly?
    The Wlan standard can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

    Given that the wireless network adapter supports 802.11 B / G and N, the 2.4 Ghz frequency is supported.
    This means that max 54 Mbps transfer rate is supported
    But it's just a theoretical value. You will never get to 54 megabits/s usual speed would be ~20Mbit/s = ~ 2.5Mbyte / s

    As you already get 2 or 3 MB/s, everythign seems to be OK

  • Satellite A660 - 11 M freezes when watching videos

    Hello

    I would like to know whether others with the same laptop had the same problem, summarily described here:

    [http://forum.doom9.org/showthread.php?p=1455014#post1455014]

    Thanks in advance

    Post edited by: ADMIN > removed link (non - English language)

    Since 2 weeks I got Satellite A660-13 q and I n t have problems, watch movies:
    -Movie original DVD > OK
    -Youtube > OK
    -Own created movies (avi) > OK
    -different movies, downloaded from the internet (often with subtitles) playing with VLC player > OK

    I put t have time to read the other forum.
    Tell me please what is the problem with your laptop.
    What videos you have tested and what exactly happens?

Maybe you are looking for

  • Windows Movie Maker Vista

    I have 4 videos of September I want to include on 1 DVD.  I also want to have every video available from the main menu, so people can pick and choose who they wish to watch.  Is there an easy way to do this?  Also, is there a way to put the chapters

  • Office pavilion 500-281 model: half-moon key wired keyboard

    There are a few keys that are new and have uncertain functions. (1) the half-moon key. He hit once and monitor will dim but visible, he struck again and monitor goes completely dark, struck again and not change even after repeated srtrikes. How do yo

  • How to analyze the .m3u?

    Hi all I get a file m3u of URL containing the playlist. can someone suggest me or give any idea to analyze the .m3u file and how to get the url of file m3u mp3. Thank you...

  • Problem connecting an SDM Service on Windows 7

    Hello world I'm new to BB development scene, so let me just get this right of the road and allow you all to keep you well for what could be a problem or a really stupid question Basically, on a new install of Win 7, I installed Eclipse Galileo and th

  • oraext:getContentAsString() function do not escape ' > ' tag

    Hi allI have the current project where I have to leave all the tags an input XML field. I used the function getContentAsString() on BPEL to perform this transformation. As a test, I sent the entry:< test > < / test >And as a response received:& lt; t