Satellite A660 works with 2 GB of RAM only

Similar Questions

• Satellite L350-141 works with 4 GB of RAM?

  I want to improve my Satellite L350 up to 4 GB of RAM. BIOS accept 4096 MB.
  But I can't install an operating system (xp prof. or 32-bit vista)
  My L350 boot from CD DVD, but if the installation program does not start I have a reboot.

  My question is: will my Satellite L350-141 work with 4 GB of RAM?

  Hello

  I think that he should t be a problem with the 4 GB of RAM.

  But as you probably n t known, Microsoft Windows 32 bit OS cannot use the full 4 GB of RAM due to the limitation of the 32-bit operating system.
  Microsoft has published several articles and documents concerning the issue of RAM of 4 GB.
  If you want you can google for this question.

  Fact is that only Windows OS 64 bit (XP or Vista) would be able to use the full 4 GB of RAM.

  The BIOS and Chipset also support 4 GB of RAM to make sure that the laptop and windows would be able to use the full memory.

  Best regards

• Is - this windows 7 works with SDRAM and DDR Rams (1)?

  Original title: RAM for win7

  Hello

  Did windows 7 works with SDRAM and DDR Rams (1)? !!!

  Yes, Windows 7 works with this type of memory RAM. Windows 7 requires a minimum of 1 GB of RAM, which is more important.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)
  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  Also run the Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• protection tunnels works with the mode of transport only?

  Anyone know why protection tunnel works with the mode of transport only? If I change to tunnel mode, it stops working immediately.

  Thank you

  That's because Tunnel mode creates a new IP header that is modified when is coordinated, when the remote peer receives this new header which is concerned the Security numbers do not match what it generated. Using transport mode retains the original header and only encapsulates the payload.

• Satellite A660 - upgrade with keyboard backlight

  I have a Toshiba Satellite A660-141. Initially, it was without backlid keyboard, but I recently bot a replacement with feature backlit for my laptop, but when I connect all backlit do not work... Can someone help me to activate it? All the world has the same replacement?

  http://1drv.Ms/1grM9M8

  Hello

  I have this model of laptop, but AFAIK this light in the BIOS option is for function buttons. With this option, you can enable/disable illumination for these buttons.
  In my opinion it has nothing to do with the keyboard.
  Mobile phones with keyboard backlit have BIOS option for keyboard only and you don't have it so I think that it is not supported by the BIOS and upgrade is not possible.

• Satellite M60-135 with 4 GB of RAM, is it possible?

  Hello

  I have a M60-135 with installation of 2 * 512MB RAM on it. I had bought 2 * 2GB 800 MHz RAM, but when I install them, the laptop recognize the 2 GB.
  I have XP installed on the machine. Is there a way to make the device to recognize the 4 GB?

  In advance, thanks for your comments

  Satellite M60 can be upgraded to 2 GB of RAM only. Sorry, but you cannot increase the amount of RAM.

• Satellite L30 - BSOD with 2 GB of RAM

  Hi all

  I have some problems, I can not explain on my * PSL33E L30 *. I bought 2 GB of RAM to put in it, but it makes Windows crashes (BSOD). I already tested memories, they all work alone. Of course they have all the right tip.
  Is there something to change in the BIOS or something?

  Thank you.

  Hey Buddy,

  If you get a BSOD with 2 GB of RAM, it seems that the modules are not compatible to your laptop in dual channel mode.

  I m not a technician but I mean that's the only possible reason because you wrote that they all work opportunity so they are not defective.

  I put t know which modules you bought, but you should test the other modules. I have good experiences with the Kingston memory modules.

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• Satellite L35 - crashes with 2 GB of ram installed.

  A back of months I posted with [problems about upgrading ram | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=33029]. Eldorado was great with helping me, I appreciate it.

  I couldn't find another 1 GB which was exactly the same as the 1 GB that had been installed a few months back. So I just got 2 new sound. I installed one about 3 weeks ago, the computer works great since (1 GB OCZ + 512 MB Stock). I installed the 1 GB 2nd Sunday and I'm back to having problems. (just to clarify, they are the same exact brand, speed, model, I bought them a week and a half hand because of the discount that was on them).

  After installation of the memory so that I got 2 x 1 GB in the computer, it starts fine, but then we try to play a game and it crashes, one of the highlights being BSODS, that time it was a black screen. We tried with 2 different games, counter-strike source, and an old not very intensive game called painkiller.
  I don't know where to go from here, the memory is this - 1 GB 667 MHz DDR2 PC2-5400 200 PINS OCZ - CL 5-5-5-15
  I try to research as much as I can before you post, and the only conclusion I can come to is that it is because she is at 667 MHz.
  The two sticks were the previous 1 gb 667, but they both installed at the same time, stock stick either, if I remember correctly, 533 MHz.

  Thank you guys

  I had a similar problem of memory on my laptop to 7 years.
  I've updated with modules of 2 x 512 MB of RAM, and after a short period a BSOD appeared.

  I thought that it s a faulty RAM or a compatibility issue and so I bought a second modules. It was exactly the same. But the BSOD appeared again.
  Finally, I tested the two memory slots using the modules unique and found out that the BSOD appears only with a second location of memory in connection to high temperature.

  Simply said the high internal temperature hit my second memory slot, and this led to a BSOD. Now I can use only one memory slot.

  I don t think that your second slot memory may be defective due to the fact that you have already used the module 512 MB in the second block memory. in my opinion, the question must be linked to the new module installed memory either TI s really a compatibility issue or the second module is malfunctioning.

  Good bye

• Equium M50-164 would not work with 2 GB of Ram

  If someone has successfully run this laptop with 2 GB of ram.
  It will take 1.5 GB without problem, but if I replace the original card of 512 MB with a 1 GB laptop does not work.

  Have now updated the bios ok, but still no joy
  can someone help please...

  Hello

  The M50 can be upgraded to 2 GB! It's a good and two 1 GB memory modules should work!
  Did you use the same memory modules?
  I found the 1024 MB PC2700 (PA3313U-2M1G) modules on the Toshiba site options & accessories.
  In my opinion, you should try this module.

  A lot of modules without a name is not 100% compatible and the quality is poor. I use the modules of Kingston and I m very happy. To my knowledge Toshiba portable computers are delivered either with memory modules Toshiba or Kingston.

  Good luck

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• Re: Satellite L40-143 with 4 GB of Ram is this possible?

  HY, my question is very simple.
  Running a Satellite L40 with 4GBRam 2 x 2?
  Because there is a note in the manual which only allow this max 2 GB system.
  But in some friends my said those old manuals and is not tru.
  Is this good?

  Thank you very much for your help!

  Hello!

  Maybe the modules are not compatible to your laptop.

  Have you also tested a RAM?

  He would check the modules with a special tool called Memtest86.
  With this program you can test if RAM is faulty or not
  [www.memtest86.com]

  Good bye

• Re: Satellite a660 - problem with HARD drive!

  Hello!

  When I turned on my computer this morning, first time I heard the HARD drive worked very noisy. It was like buzzing and clicking, has never been like that. Computer is 3 months old, bought in the pc world.

  If anyone can help what to do?

  Thank you

  Hello

  > he was like a buzzing and clicking on... Was never like that. Computer 3 months ago.

  Sometimes, this can happen with the new hard drive too. I recommend you save all data, if it stops working. In case you, I communicate with the service center and ask them to replace. they will do it for free. you see, it looks like mechanical problem and don't think you can fix it yourself

• Satellite A660-10W with HDCP support

  Hello guys,.

  I have the A660-10W and want to download iTune HD movies
  He said: I need to have a video driver with HDCP (support?) but I don't know, and I do not understand what it is.
  I would appreciate your help - as you have done very well in the past.

  Thanks in advance

  Hello

  HDCP is a copy protection Protocol.
  This Protocol prevents copying of high-definition movies.
  If the system does not support HDCP, you will not be able to send data to the device (TV, LCD) through other ports such as DisplayPort or DVI or HDMI.

  Microsoft Vista and Windows 7 use HDCP screens and computer graphics cards.
  But if you want to watch movies in high definition on an external TV, you must ensure that both HDMI ports on TV and laptop support HDCP.

  But it seems that Sat A660-10W does not support HDMI port and so you will not be able to watch as the HDCP protected HD movies on external monitors.

• Satellite L30 - 10W shows 894 MB of RAM only

  Hello

  With advance sorry for my English. I'm Polish and I use Google Translate because I know too much English but I think that you can somehow not the TRAINER TR? in spearwood.
  I have a problem that really bothers me. Namely, the laptop I installed 1024 MB of RAM, but the bios and the system itself (Windows XP SP3) I can detect only 894 MB of RAM. And my question is: is it possible, it not? And if so, why. I tried to manage myself somehow. Convert the sequence of the RAM (in the slot machines), set individually, but it still does not work. Below the type of RAM (as both are identical). Everest he showed to me.

  Module name: Hyundai HYMP564S64CP6-C4
  Serial number: 04004172 h
  Manufacturing date: week of 4 / 2007
  The module size: 512 MB (2 rows, 4 banks)
  Module type: Unbuffered
  Memory type: DDR2 SDRAM
  Speed of memory? : DDR2-533 (266 MHz)
  Module width: 64 bits
  Voltage of the module: SSTL 1.8
  Method of error detection: no
  Reduced refresh rate: 7.8 (US) Auto Refresh

  Memory clock:
  5.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  4.0 - 4-4-12 @ 266 MHz (CL-RCD-RP-RAS)
  @ 200 MHz 3.0 - 3-3-9 (CL-RCD-RP-RAS)

  Manufacturer of memory modules:
  Company: Hynix Semiconductor Inc.

  Well well, to throw in addition to information about my BIOS:
  BIOS type: Phoenix
  BIOS date: October 24, 2007
  BIOS ID: Phoenix 4.0 Release 6.1 NoteBIOS
  BIOS OEM: v3.10
  Chipset: VIA 82 3038 rev 97
  SuperIO: unknown
  Manufacturer: Toshiba
  Motherboard: Satellite L30

  Hello

  According to the specifications of the laptop your L30 has ATI RC410MD graphics card. I m not 100% sure, but I assume that it is the shared memory card which means that certain amount of RAM will be used for graphics operations. Due to this RAM more low value appears in cell s system information.