Satellite C50 - seeing power on but turns out shortly

Press the power button and it goes blue for a few seconds, a sound, as appropriate. No doubt zero start whirring. Then it turns off.

The last thing I remember do sent the laptop in + sleep + or + off + mode - and before he had completely turned off I had closed the lid.

Maybe the battery was completely discharged at the same time by coincidence, because the next time I tried power - * nothing *-not even walking blue light. Only after completely charging the battery is the market of light work. But it's the only thing that works now.

The unit is still under warranty and has never traveled outside, neither was abused.

Any help appreciated than before I resort to return official Toshiba service/repairs.

Hello

Try the steps: disconnect the power and remove the battery. Press the power button / stop for about 20 seconds and leave it for a while. After having done that connect the power supply only and try to start your machine.

Please send comments.

Tags: Toshiba

Similar Questions

  • I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

    I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

    You need a disk FULL/license to do a clean install, not an upgrade license.

    Take it back to Wal-Mart and see if you can exchange it.

    See you soon. Mick Murphy - Microsoft partner

  • Satellite L40 is power on but the screen is blank

    Can someone help me with a problem?

    I'm not a computer expert and my laptop won't do anything. If I put power turns on but the screen remains blank

    Hello

    Try this:
    -Remove the battery and unplug the AC adapter from the portable computer
    -wait for about ~ 40 min and reconnect the two parts
    -then try to turn on the laptop

    If this does not work and the laptop does not start in windows OS, then you could try to insert a bootable recovery disk Toshiba and could attempt to reinstall new OS.

    If the procedure still does not have a hardware malfunction is possible, and in this case only the authorized service provider would be able to help.

    Good luck

  • WiFi does not work on Satellite C50 - B - 14 d, but shows the connection

    IM extremely frustrated and im ready to return this piece of trash to the shop

    my wifi connectivity (4bars) Watch, but Web pages don't load, if they do they will be load then completely stop working after a second

    not surprised because I know that this product is not very good, but im wondering if this is a software problem or a missing codec, im ready to send it back to the shop, but I was wondering if I can solve it with a simple solution

    Hello

    How about the connection to the LAN?
    Have you checked it?

    From my point of view there would be some kind of problem with the WiFi modem/router as the laptop is already connected to the router correctly.
    If in doubt recommend you also contact your ISP (internet service provider).

    My internet point of view, availability of connection must be checked!

  • Necessary recovery for Satellite C50-A-19 t disc

    I lost all of my Toshiba satellite C50-A-19 t but do not have a recovery disk.

    Can someone help me wit by sending me a disc?

    E-mail [email protected]

    If no one can help with this, please visit https://backupmedia.toshiba.eu/landing.aspx and order an original disc of recovery for your machine.

    Good bye

  • Satellite P300 - on power turns on, but nothing happens on the screen

    Hello

    I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off nothing extraordinary happens.
    Although later, when I went to turn on I pressed the power button, but the screen was not working, I tried to connect an external display but nothing showed on this subject, although the power of lights was turned on, the drive CD opened and closed as normally don't and I could hear the fans work.

    That I realize windows 7 welcome sounds were not playing even after a few minutes with the laptop turned on and the laser mouse was working only for a few seconds before it shuts down.
    It was when I started to believe that this was not a screen problem, but something else.

    I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

    Today the same problem has occurred, and I tried to set the same way as I did yesterday, hold the power button for 60 seconds, but this time it did not work. I retried it for 3 to 5 times and nothing.
    After a few hours, leaving the computer is off, resting, I retried the process and now it worked.
    Now I'm afraid to turn off the laptop, because I need a lot of time and patience range to activate.

    What could be the problem and how do I solve it?
    Can you help me?

    cumpliments,
    Adriano

    > I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

    Yes, this workaround is sometimes useful to bring back the unity of life.

    > What could be the problem and how do I solve it?
    It's hard to say what causes this. Satellite P300 is an older model mobile phone, so it is possible that among the pieces of equipment begins to malfunction.
    It would be interesting to know if the use of the various modules of RAM would change the functionality of the laptop. If you have compatible RAM modules spare you can test it.

    In the worst case, it could be possible that beginning of motherboard laptop malfunction.
    It would be the worst case I hope for you that it s not mobo related issue.

    PS: Check if your BIOS is up to date. In case this is not the latest version, try to update the BIOS.

  • Satellite C50 - A - 14 d is shuts off and won't turn back on

    My new Satellite C50 - A - 14 off d on 30 minutes ago and no restarts. When he stops, he was about 50% of power left.

    I tried to load, but the light that lights up while loading did not come, so I pulled out the charger.

    If anyone knows what is the problem, please tell me.

    Thank you.

    The power LED indicates if power correctly to the laptop.
    In case it turn OFF, power is not supplied to the laptop.

    There are two possible reasons for this:
    (1) the adapter is faulty
    (2) malfunction of the notebook s electronic supply (part of the motherboard)

    If these two parties needs a check.

  • Something is wrong! Start in safe mode, but it turns out that for Normal mode.

    Mac Mini (late 2014)

    Processor 3 GHz Intel Core i7

    16GB 1600 MHz DDR3 memory

    Start drive Macintosh HD

    Iris 1536 MB Intel graphics card

    Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

    I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

    I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

    After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

    After I log in, I checked my Mac mode, this is actually Normal mode!

    If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

    If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

    It works very well in Apple store, but not in my own House.

    Anyone know what is happening?

    What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

    Do you have other devices connected? If you delete them.

    Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

    Try safe mode if your Mac does not end commissioning - Apple Support

    I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

  • Satellite C50-B16T - slow WiFi connection using battery power

    Hello

    I have a new Satellite C50-B16T and discovered that when I take it off the power, wifi is slowing down as HELL, to the point that I can't even use it and have to connect it to the power.

    I saw a few solutions on a TX adjustment, but my Satellite actually doesn't have this option, and if this is the case, I don't know how to find it and why it is happening.
    Would really appreciate if anyone has any suggestions, since my laptop is now essentially a desktop all the time, which makes its pretty useless goal...

    Go to-> WLan card device manager-> properties-> tab power management

    Here, uncheck the option that allows the system to disable or control the unit in order to save energy.

    Also check the tab 'Advanced' for possible energy saving options.

  • Satellite C50-A-172: how to keep Bluetooth turned on Windows 8.1

    Heey,

    I have Toshiba Satellite C50-A-172 with 8.1 Win x 64 and ar3012 v4 Bluetooth chip
    I have problem with Bluetooth to turn on.

    I have to press twice (FN + F12) key windows even starts to reactivate Bluetooth.
    How can I to turn on automaticlly with windows startup?

    cuz withot press fn + f12 does no detected bluetooth devices?

    Hello

    You can activate the BT in 8.1 win without using the function key.

    Under Windows, 8.1, the Bluetooth option has been moved to a new article
    To activate BT in Win 8.1 settings press the Windows key + C to open the bar of charm.

    Click settings, and then select mobile PC settings. Then go to the PC section and devices.
    Now, you will see the Bluetooth box and the cursor WE / FF that would turn on or turn off the Bluetooth option.

  • Anyone know why I can't buy the Portugal LR6? When I select the desktop application of most place hiden in the site Web of the page turns out to be empty! Other areas which is not the case, but since I am connected to the Portugal I'm not able to purchase

    Anyone know why I can't buy the Portugal LR6? When I select the desktop application of most place hiden in the site Web of the page turns out to be empty! In other regions that is not the case but since I am connected to the Portugal, I'm not able to buy elsewhere.

    Please check the availability of https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf

    Concerning

    Stéphane

  • Satellite C50-B-12V: mic turns off when I plug the headphones

    Hello

    I recently bought a computer laptop Toshiba Satellite, Satellite C50-B-12V

    I'm really happy with my new lap top - thought I am facing a problem.
    It seems that the port to plug in headphones and the port to plug in a microphone is the same. so, if I plug headphones wireless for a Skype call, the other party can not hear me.

    Is there anyway that I can adjust the computer so that it shouldn't be a problem?

    Again, I would be able to plug the headset on my computer to hear my interlocutor better - and who have not cause the other party cannot hear me.

    Hello

    This integrated headphone / microphone port equipped with a plug of 4 section (identified with 3 black rings)
    You have two options to solve the problem mentioned.
    You must use a headset / microphone with jack combo or you could buy an adapter 'Y' which can connect your current helmet with separate microphone and speaker back to the headset / combo jack.

    Something like that:
    [Y audio / headphone | http://ecx.images-amazon.com/images/I/41Y59zwJxcL.jpg]

  • Problem starting on several Satellite C50 - C70 models

    The members of the forum and Toshiba, Hello

    Recently, I sold several laptop Toshiba Satellite C50-70 and Satellite Pro series.

    With most of them, I knew starting problems.
    When turn on/off the laptop, I see the Toshiba Logo and then nothing happens.
    I have to turn it on and turn it on again so he can start on Windows. (7 or 8.1)

    Sometimes, I have to power OFF / ON several times.

    What I see is that the NumLock light does nothing. If the system starts, I see this LED flashes on / off 2 times. So, I can see on forehand if the laptop to boot Windows or hangs at the Toshiba Logo.

    Anyone having the same problems?

    I put t know if anyone has had this problem but I guess that if the books are new and covered under the Toshiba warranty, you must contact the maintainer authorized Toshiba in your country to check the material part.

    The Toshiba start screen freeze means that the POST (power on self-test) could not be transmitted correctly and it is especially a sign of hardware malfunction.

  • Satellite C50 - B - 11 L - erratic Touchpad

    Hello

    I have a Tosh C50 - B - 11 L for only 2 weeks (to replace an old Tosh Satellite L300, which was very reliable).
    I want to throw it away, due to the response of the touchpad. It will freeze or no reagent, erratic, will ignore the taps, etc. Causing destruction at the sites where the cursor is not where he appeared to
    be. And is extremely frustrating, as I am simply unable to use the laptop to its potential.

    I got the latest driver of momentum. I see that this seems to be a problem, that does not seem to be addressed properly by Toshiba.

    Any suggestions? Could I delete the drivers of the momentum and always have a touchpad to work?
    Or should I forget it and buy a hardware mouse (which rather defeats the point)

    Thanks for your suggestions (I did the F5/F9 nothing helps stuff)

    Looks like in there was no one else here for awhile. My question will likely go unanswered as well.

    Personally, I think that the touchpad, that you got was made at 3:30 Friday afternoon, recently classified computer of someone with exactly the same type of problems. Turned out there, it was nothing of evil to his computer, it was the wireless mouse get funky.

    But there is another thing that is interesting to watch too, she is part of a tutorial to help Google Desktop, I wrote and it may be relevant to your problems as well. Remember, when you go through this process to empty all the fertile Toshiba as well waste and let Windows itself handle all these functions, you will discover quickly that Windows is not all that slow after all.

    Mods - please do not hesitate to use all or part of the following as a sticky thread, it will really help a lot of people.

    Shamefully, this forum does not allow attachments and has a limit of characters on the message size. Ok. Simply means that I have to split the text on 2 positions. Starting to remind me of my troubles with getting a new BIOS.

    Background programs

    It is the most common problem with Windows, programs running in the background. Some programs such as your antivirus software must run constantly in the background so that they can check all files that it is open and make sure that you're not everything to trigger a virus. Some programs will be set up to run in the background so that when you click on the icon to start the program, it seems to start quickly. But most just start in the background so that it puts their logo in the taskbar next to your clock.

    All of these programs, and there are usually dozens of them, use main processor and the RAM in the computer to run so you have run the slower your computer gets. Many of these programs are poorly written and very often interfere with each other and with the Windows system, this can make Windows start behaving oddly, perhaps that the Office will not open, maybe the internet will work all kinds of other problems.

    The solution is simple, we stop these programs from starting when Windows starts. Should remove all programs, just to keep them from starting automatically, you will always be able to start one of them by double clicking on their icons. Windows built into the program to do this, it's called MSCONFIG. Just of type msconfig in the search bar of program and click it to start it.

  • Satellite C50-A-19 t - very low display

    Hi I have a Toshiba Satellite C50-A-19 t Windows 8 and recently the display is almost non-existent.
    When I start the machine, I see about the Toshiba Logo and that's it – even, it is difficult to see.

    What I tried:
    (1) external Monitor - external monitor works fine (connected via VGA).
    (2) I have tried the Fn/F4 key to chang what display, tried a few settings and still nothing on the laptop screen
    (3) I have obviously checked the brightness, it's almost max.
    (4) I removed the battery and power, left computer laptop for a while, then tried to turn on the back with the battery still out - nothing else.
    (5) I googled like crazy and tried to remove the battery & power, press and hold the power button / stop for 60 + seconds, made 5 - 10 times in all, still nothing when I power on
    (6) I replaced the screen with another similar toshiba that I know works - it's exactly the same thing.

    Is there anything else that I'm missing here?

    The laptop works like a dream when connected to an external monitor... and I have removed and reloaded all drivers display, reset the CMOS, etc..

    I am confused now and it is one of the children with homework, so my ears get sore!

    PLS HELP!

    > 1) external Monitor - external monitor works fine (connected via VGA)

    It is most important information that you have provided in your message.
    In case the external monitor is OK, the GPU/motherboard should also be OK.

    From my point of few display panel (backlight) is defective.
    The backlight of the display is not working properly.

    You said that you have replaced the screen well, compatible display board?

Maybe you are looking for