Satellite C50D - A - 13 G off when disconnected

Similar Questions

• Satellite X 200-203 turns off when turn off the power

  Hello

  first of all, excuse my bad English please.

  Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.
  When I connect the power he works very well, but did I unplug the power replisse or the laptop turns off. under vista it shows me always a 89% battery power, ALWAYS.

  What can I do?
  at least, the satellite logo lights up red annymore.

  Thank you

  Hello

  According to your description, the battery provides the laptop with power.
  In my opinion there is problem with the battery itself or electronic supply on the motherboard.
  I think that it of a failure of battery, but to be 100% sure that the audit of the books is necessary!

  The X 200 is a new series of laptop so I'm 100% sure that the guarantee is valid. Am I wrong?

  If you shouldn't t waste time and contact the service provider authorized in your country.
  The guys of the explain your situation and ask for later handling.

  Each cheque replacement and part is done for free!

  Good luck & congratulations guy ;)

• Satellite A30, portable computer turns off when you play pc

  Hello
  I have a laptop satellite a30. I have only recently problem with it when I want to play pc games. I don't have any other programs running and the computer just to cancel, is dead, his car turns off. I can't seem to find that something wrong with pc games and it must be running on the pc. can anyone help please? suggestions for wat I can do?

  Lee.

  Hello
  First of all, did you updated on the machine, if if, which updates? patched the game (updated)? do you have any kind of error messages (eventlog)
  concerning

  Gandalfwhite

• Satellite A660 - optical driver turns off when burning DVD

  I have a problem with the optical drive of energy saving options that disables the drive while burning.

  I tried all the suggestions mentioned here [http://forums.toshiba.com/t5/Satellite-Laptops-A-Series/Optical-drive-automatically-turns-off-due-to-power-saver/td-p/223654], but it does not help.

  I start at the burn in Ashampoo Burning Studio free, and he seems to be good until the end. When it starts the process of lead-out the popup of the optical signals Drive Power drive is turned off. It's funny because it is still running at the speed of combustion and it will not stop. The reader becomes unresponsive, even I can't the DVD out. Even, that it disappears from the list of devices.

  The only way I thought so far to stop the car and release the DVD is in the shutdown/Hibernate the computer.

  Once the dive starts working again the STRANGE Fn-tab functionality started working and I can turn it on/Off/ejection at will.

  All the burned DVD - s are not valid, and so far I have not managed to burn a single functional DVD.

  I have a Toshiba Satellite A660 - PSAW3E with Win7 Enterprise 64-bit.

  Is there a way to fix this? Remove the optical drive power management?

  Hello

  To be honest I have never heard of this issue, but it appears that the optical drive power management is part of the power of Toshiba configuration utility.
  Part of the Toshiba value added package configuration done Toshiba power utility.

  What you can try, for testing purposes, to remove the Toshiba added value of the system package, restart your computer and try to burn DVDs again to see if the same problem will occur again.

  Toshiba value added package contains several tools such as utility cards flash FN so after his withdrawal, you will not be able to use the FN keys. In any case, after that trial, you can download and install Toshiba value added package again.

  I mean, I know what kind of conflict is there, but maybe you should consider it.

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Y40 - 70, off when disconnected.

  Hello everyone.

  I bought a computer from Lenovo y40-70 in early January and so far I really liked it. But just the other day, I started having some strange problems that I am frankly at a loss to solve. It has progressed in several stages, and I'm a little worried about my laptop. I wanted to know if anyone had fixes / suggestions:

  1 - the first thing I noticed that the battery icon would not show the 'fill' battery upward while it was plugged. I remember reading that the battery icon is not always refresh, and as the battery said it was in charge, I don't worry.

  2 once again, yesterday. After using my computer without the charger for awhile, I plugged it to work. It has been plugged in for a good two hours, and yet the battery continues to read to 17%. He wasn't going to the top.

  3 - I unplugged my computer to check the status of the battery. My whole computer cut down (instant, black screen, fans stopped etc.). Turned on while it was still unplugged to watch it reboot fine. Battery was still 17%

  4. repeat the process to plug/unplug the computer to find the computer off every time. The battery did wind up filling to 94%, so did not. I finished my work for the day and went to bed.

  5 tried to boot my laptop, unplugged, today while I was out. It lights not, despite the fact that I know that he had a full battery before I put it there. I then plugged and tried again. It turns out, displaying an almost total battery. When the computer was still in withdrawal of the plug, once more instantly it turns off. Several attempts more and it's pretty clear I can't use my computer unless it is plugged.

  And it's quite revealing of the situation so far. I don't know if it's just a matter of a defective battery or if something else is at work, but I was wondering if anyone had advice until I called him in support.

  Thank you!

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you

• Satellite A100-237 screen remains off when the lid is opened

  OK I'll try my best to explain this. My power settings are adjusted so that the computer has no effect when the lid is closed - except for the display, which is turned off and back on when the lid is opened (normal behaviour).

  Now, in rare occasions, when I opened the back cover, the screen doesn't come back, unless I close the back cover and open again. It is not a big problem for me at the moment, but I'm afraid that the connections of the screen with the motherboard by the cover have been damaged.

  BIOS version 2.00, maybe an update could solve it?

  Thanks in advance.

  Hi Ataberk,

  I think that your problem can be caused by the micro-switch that will detect when the laptop lid is closed. If this switch is in the open position so your screen will remain off even with the lid open. The idea here is that you can get the display by closing and opening the lid again.

• Palm TX turns off when disconnected.

  Recently moved and unpacked and recharged palm tx by usb and connect it to the output.  Works very well so that hip.  Has not added any new software.  When unplugged immediately turns off and only turns on when plugged into the socket again and the soft reset.  Tried soft reset several times and just tried a hard game.  There is no change.  The device has 4 years but otherwise works well with no damage.  Not sure if this is a battery thing, which means that I would have to dispose of the unit or something else.  Was working fine 1 month yet.  Really need it to work in the short term.  Any suggestions would be a great help.

  scalpel7 wrote:
  Thank you very much.  Will check.  Radio Shack only the payments of battery I looked towards the top of the stack and it is said that must be soldered.

  Radio Shack does not repairs, AFAIK.

  Both websites will install the battery for you if you wish for a fee.

  WyreNut

• Satellite A210 - 128 (PSAELE) turns off when you try to boot from the CD/DVD

  Hi all. I have a (serious) problem.

  I bought my Toshiba two years ago (it was brand new) with Windows Vista already installed (vista and boot partition). Now I'm trying to boot and install Windows 7 Ultimate, but after I select boot from CD/DVD and start the copy of the system files, my Toshiba * turns *, completely. Overheating is not the problem for sure.

  Anyone with a similar experience or everything to know about how to solve my problem? :(((

  Thnx,

  Stipe

  Hello

  Why you are sure that your computer laptop isn't overheating? In my view turn is the typical pattern of overheating and you must clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  You have this problem when you try to install Windows 7 or make this happen with the Toshiba recovery disc too?

  Maybe during the process of copying the files will be written on a bad sector on the HARD drive and so he shuts himself who knows?

• ConfigFree on Satellite A80: wireless switch is OFF, when its actually

  I've seen several comments on this problem, none of them is resolved.
  I'm running an A80. Until I updated the driver wireless and Configfree, Configfree has worked well.
  Now, however, no matter what I do, any driver, I installed, or what version of Configfree, now they all insist that the wireless to cut when it is indeed running.
  Everything except the Radar works very well. Even now, I am connected to the wireless network.
  However - by selecting the Configfree Radar showed the error message
  "Wireless is disabled. Please activate the wireless communication switch.

  It drives me crazy. I spent three days on this problem. I guess that's not really necessary, because it is only a display - but I want it to work! :-)
  I am a very experienced user, but this one is difficult. because I suspect its software based really.
  I can't believe that in the world, with many people to see this problem, that Toshiba does not found the difinitive this problem cause and posted a fix.

  In summary.
  With original features such as pronounced - it worked and displayed near the wireless stations.

  After the upgrade to the latest drivers wireless and Configfree - Configfree actually works but WILL NOT operate the Radar, because he insists on the fact that the wireless switch is DISABLED, when in fact it is powered.

  I tried everything, including the FN + F8 - which also seems to be unresponsive. But it could be another problem, I hope. Not interested in this, because the wireless is still on.

  If anyone has a solution that works, I'd love to hear about it.
  Thank you
  Robert

  Hello, Robert

  In my opinion ConfigFree is one of the best utilities offered by Toshiba. This utility is pre-installed, I think, on all models of laptops Windows XP Home edition, and I can't imagine that there is a bug.

  All of the tools and utilities that you can find in recovery image is suitable for each model of laptop, tested and I really can't imagine that such bug may be there. It is very interesting that you wrote on update. Sorry but I checked the original version and the version offered on the Toshiba download page, and they are absolutely identical (ConfigFree V5.00.45).

  I use two Toshiba laptops, both with WXP and I use the CofigFree version that is included in the recovery image. It works perfectly and I see no reason for update (if this update exists, but I don't believe that).

  So it will be interesting to know what version of ConfigFree you use and where you have founded an update. Please be so kind and give us more information about this update.

  Maybe a few links to other multiple posts may also be useful.

• HP ENVY dv6z-7200 CTO Notebook: laptop will not be charged and will turn off when disconnected

  I noticed yesterday when my laptop has suddenly been shut down 64% autonomy when I forgot to plug it in and now it will not be charged. And when its unplugged it shuts down.   I check my settings and there are still immutable.

  Please help me.

  Hello

  This is a technical director of the machine therefore no available records. Please get the part number on the battery and the HP Store or stores order online like Amazon, eBay...

  Another option: use the following instructions to find the product id of your machine, and then use it to search for available baterry:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.

• Satellite A110 ranging power off when it is hot

  My Satellite A110 is always turned off when it's hot.

  What is the problem? Mayby fan? Can I change this?

  Hello!

  You hear a fan noise?

  Maybe you should clean the laptop. For this, you can use compressed air jet and could blow the dust from the fan. You n t have to disassemble anything.

  And try to find out if the fan works.

  Good bye

• Loss of the battery when the Satellite C50D - off A00L

  Hello world

  I was hoping that someone could help me. I recently bought a laptop Toshiba Satellite C50D - A00L that came with Windows 8 is installed.

  I have trouble with the loss of the laptop battery power when it is turned off.
  I had a full load and off, but when I turned it back three days later he was up to 50% of power.
  I had spent it in airplane mode (I was off internet reception) to try to stop the loss of power - the case wherever he was somehow looking for information for apps.

  I am all of these ideas, and I was wondering if it was something to do with my laptop or something that happens frequently with laptops in general.
  Any help would be appreciated!

  Hello
  There are some some options and settings that should be checked.
  First access the BIOS by pressing the F2 key and in the BIOS settings disable the Wake Up on LAN option. In most cases disabling this setting you would help prevent losses of battery power.

  Secondly I recommend that you perform a complete shutdown of Windows 8 (or Win 8.1)
  The system of Windows 8 keeps Notepad by default, but it defines the hybrid unit stop mode.

  Please check this document how to perform complete stop down.
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]

• Satellite C50D - A - 13 G affects the WiFi devices

  Hi all, first post and a problem, like most I guess!

  Bought my first W8 portable Satellite C50D Tosh - A - 13 G

  Wifi is driving me crazy

  When it connects to my wifi BT, all the other designs the loss of home their wifi connection.
  This new laptop, "hog" the seams the connection,.

  Only way out, is to make the power of the BT box and wait 5 minutes!

  I guess, it's a window 8 setting somewhere, but sorry I'm a bit of a dummy!

  Any help would be appreciated, please

  TIA

  Tim

  Hello

  It seems really strange to me that the connection this laptop WLAN would affect the other devices that are connected to the home network wireless.

  You use a WLan router common home - which provides a pool of IP addresses which are assigned automatically to each devices?

  The Satellite C50D - A - 13 G was equipped with a card of WLan Atheros 802.11 b/g/n commune (chip WB335) and this module actions WLan and BT connectivity.

  I recommend you to disable Bluetooth while using the WiFi network.
  You can do this by going to charm bar (Win key + C)-> settings-> PC-> PC and devices-> Bluetooth settings
  Here, you can move the cursor ON / OFF

• Satellite C50D-B-120 seems to be slow

  Has anyone else had problems with this laptop model?

  Mine seems slow but on further review that this is indeed the parties stop and start intermittently and not all at once.

  The keyboard and touchpad are more obvious because the cursor seems to stutter on and often typed letters do not appear on the screen for a few seconds.

  WiFi also cuts out intermittently as well as Ethernet and other ports.

  Also I tried to do a factory reset which takes no more than 20-25 minutes to write the recovery disk 'C' partition, but it takes more than 3 hours! This time does not include the implementation of the laptop after the reset.

  What should I do with what it is unusable and only bought new at argos, 2 weeks ago.

  Satellite C50D-B-120 seems to be equipped with 4 GB of RAM only...
  I think an upgrade to 8 GB would be desirable.

  Also the applications and the amount of the process that runs in the background can slow down the laptop and the system performance.

  What you can try to do is to clean the system using CCleaner.
  Also turn off some nonessential processes that start when the system starts.