Satellite A110 ranging power off when it is hot

Similar Questions

• Satellite A110-160 turns off by itself when im making a dvd to divx conversion

  My Toshiba A110-160 turns off by itself (abruptly) when im making a dvd to divx (autogk for example) conversion.
  This has not happened before...
  I use a bios updated to v1.7 (the latest).
  Do you think that it is because of this? I also did an upgrade (2GB, 667 mhz) memory and I use ubuntu and windows xp.
  Any ideas?

  Hello

  I Don t have a clue why the machine will stop automatically and I can't give you a quick solution, but I can give you an idea how to make some accurate diagnosis:

  Remove the newly installed module and try again. Then give some feedback if it worked. If not, he should discuss more about this issue, would appreciate some comments from you.

  Good bye

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• My computer suddenly turns power off when I'm uploading photos. Why?

  When I upload photos on Facebook my computer suddenly switches off. What could be the cause of this?

  "Nelson Riñón job" wrote in message News: * e-mail address is removed from the privacy * .com...

  My pc turns off suddenly when I'm uploading photos in Facebook. Why?

  Overheating, driver problems, and many others.  What are your having seen or heard before shutdown? It happens at any other time? Look in Event Viewer to see if you can see any represented pattern that would cause the stop.  Is this a full power off shutdown or a blocking of the screen or the BSOD?  Describe please.

• Satellite C850-B820 shuts off when I take off my power cable

  Hello

  I bought laptop Satellite C850-B820 2 months there is use to this normal subject, 2-3 hours a day, I was working on it without the power connected, the status of the battery was at 50% so I plugged in to recharge, suddenly power left and returned to 1 seconds, after a while, I took the power cable and suddenly he cut re plugged again and checked the status of the battery is completely charged 100%, someone has idea what wrong with it?

  Maybe the disconnection of electricity makes the battery or motherboard?

  > Shows 100% recharged, but the battery has no effect, if I unplug the cord cut.

  In my opinion, there are two reasons why the unit stops when you unplug the AC adapter.

  (1) battery failures and State of charge of the battery will not
  (2) electronic power supply motherboard is faulty. These electronic controls of the computer mobile power

  I think you should check if the new battery would help to solve your problem.
  But you said that the laptop is not very old, around the age of 2 months and so the warranty should still be valid.

  In this case, you should not attempt to resolve yourself but should contact the service in your country in order to verify the device. He should be permanently guaranteed covered

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Re: Satellite L300 - screen turn off when it will be moved

  I have a problem with my screen stopping when I move my laptop or move the screen slightly. The computer does not turn off just the screen becomes black. I have to then hold the power button to turn off the computer.

  Does anyone has any ideas or had this problem?

  Hi Geg,

  You may notice this behavior on external monitor too?

  For me, this looks like a hardware malfunction caused by internal display or just the cable. You should ask a technician for laptop help.

  If only the cable must be replaced cheap s and takes a few minutes a technician for laptop.

• Satellite P100 - 429 A3 off when windows loads

  Heya. It is a serious problem that made my laptop unusable. I was wondering if anyone knows what it is.

  I was in a source game when it happened for the first time, I jumped into the game and the laptop just cut off. No classes stop, he just turned directly to the exit as if someone had held the power button. I looked at him with her for a minute and then turned it back. Everything seems to be going very well, I thought it was just an odd hiccup, but then, after completing the windows loading screen, it does exactly the same thing. Now every time I start, it get past the loading screen and sometimes it get on to the welcome message, was until the cursor is even loaded, it will turn off in the same engineering.

  The only things I've recently changed it is the BIOS (which is my obvious suspicion). I was watching just the page drivers from the Toshiba site and I found a BIOS update for my Notbook cliaming that it has been improved. So I downloaded and installed, once the facility had done his work to restart the laptop, but on all first run Windows bluescreened before he had even loaded. Then, after that, it worked very well so far.

  I also tried to use a Windows disk to perform a recovery of windows. However, the recovery console has done the same thing. In a few seconds initialization, the computer just cut off.

  If anyone has an idea of what is is, please let me know.

  Sorry for the typos, I'm not on a familiar keyboard.

  Thanks again.

  Wolfy

  > I jumped into the game and the laptop just cut off. No classes stop, he just turned directly to the exit as if someone had held the power button.

  Well, this looks like an overheating problem. Fact is that all internal devices run with a full performance during the game. This leads to a temperature inside the laptop. If your fans are not free because of the dust and debris then the laptop will be shouting down to prevent material damage.
  In this case the fan cleaning is necessary and desirable.
  I had a similar problem on my laptop and solved using a jet of compressed air!

  To my knowledge the P100-429 Sat belongs to the series of PSPA3.
  You should really be 100% sure that you are using the good BIOS.

  However, it is also possible that the laptops hardware is malfunctioning.
  In this case, the verification of the material is necessary. This test can be done by a service provider authorized in your country.

  Good luck

• Satellite A300-1GC - turn off when I play games

  Hello

  I try to explain my problem (I'll try because English isn't my motherlanguage wull so hards to ensure that you understand me Hi!).
  Usually I use my Satellite A300-1GC also for two or three days (I watch divx on tv and other small applications, but nothing special) and never happened to me that yesterday was happing!

  I installed a game (Jekyll & Hyde) and I played it with the pc cable hook up to electricity. After a while (I think only an hour) the computer turns off! After that was not possibel to turn it on nothing! No light was on the same battery icon nothing complitely dead! After about 10 minutes instead of the icons light was on and so I was able to restart the computer. Windows XP doesn't give me any error on the "blackout" reports the system. I restarted the game and play with him for about two hours without any problem! If you have something (hihihihi) understud my question is:

  Whay you do that I can do so that this accident will not happen more? Is there some test or newspaper or something similar I can read to see if there is any hardware/software problems? May need a BIOS update? I mean, is there anyone who have the same laptop and have similar experience and sort it out with an update?
  On short time I'm planing to install windows 7 (two DVDs I received from Toshiba) but first I must address this problem.

  I thank the of in advance for help
  Helen

  PS: Once again at 11:36 the laptop shut down whenm I played :(

  Hi Helen_1,

  Usually, if the laptop shuts down during a game, it s caused by a higher internal temperature to protect the equipment.

  I put t know how long you already have Satellite A300, but usually the laptop must be cleaned every 3 months using a jet of compressed air. You will find here in the forum how an article on this subject:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Also make sure that this new Toshiba Web site display driver is installed.

• Satellite P10-804 - power off without reason

  I have a problem where my laptop suddenly turns off without any reason at all. Most of the time it turns itself in the upper left corner of my laptop get really hot and it's too hot around the area where you insert the CD. Although, sometimes it can only leave after I ve had lit a few minutes.

  Some suggestions say that there could be a problem with the cooling system or the fan.

  Please can someone offer me advice or suggestions?
  Please help as I had only the laptop to 18 months now and she probably shouldn't t do it suits it?

  Hello

  I think you're already on the right track. 18 months is a long period of collecting dust so it could just be overheating. Check the intakes for the dust.
  I've seen suggestions to use a vacuum cleaner to suck up dust from the mouths of - I would not recommend myself because there is a chance that the fan may be damaged, but it could be a way for you.

  Good luck

  Tom

• Satellite L875-116 turns off when installing graphics driver

  Computer laptop L875-116 was caught in the cycle of continuous reboot (last driver loaded CLASSPNP. (SYS). Retrieved HARD drive recovery, but laptop still caught up in the cycle of rebooting to the 6/49 - graphics driver.

  Attempt to retrieve the DVD, new was wobbling at 6/49, but eventually got to 49/49 after three hours.

  Error with Catalyst software reports of (the age AMD) and only runs pilot generic VGA.

  When tried to update the driver PC gets stuck in the new cycle of rebooting.

  If uninstalling driver update (F8, last known good configuration) that's the generic VGA driver running.

  The thoughts if it is hardware or software related?

  (Windows 7, 64-bit)

  > Any thoughts if this is hardware or software related?

  In my opinion its hardware problem.
  Eventually he s a graphics card problem.

  Usually the laptop should work correctly after or during the process of recovery if it s not the case, then basically a hardware problem is the troublemaker

• Satellite P300-173 never off when the ethernet cable is plugged or WIFI

  Hello

  I can't stop my P300 correctly.

  Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.

  As the network is always connected, it's really annoying.

  Can you please help?

  Thank you!

  ER

  Hello

  Very strange problem
  First have you checked if you use the latest version of the BIOS?
  Please check this!

  On the European driver Toshiba page you will always find the latest BIOS and divers.

  Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card

  Check if this may help solve this problem

• Auto power off when spread to the other monitor__

  Hi Sir, Madam

  I have a question about to extend the desktop on the other monitor. I use my mobile 2.00 GHZ (RAM) 2,00 GB and OS 32 bit and I extend to the other my monitor, but when I play Age of Empires 3, he automatically stop and show this kind of error above can, Mr President, Madam helps sort or know what happened really. I currently use the fujitsu, S7111 model. Hoping to hear from you soon.

  This is the error:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.6

  Locale ID: 18441

  More information about the problem:

  BCCode: 116

  BCP1: 84A 19510

  BCP2: 8BC0ECB0

  BCP3: 00000000

  BCP4: 0000000D

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini030110-08.dmp

  C:\Users\Jun Kit\AppData\Local\Temp\WER-44678-0.sysdata.xml

  C:\Users\Jun Kit\AppData\Local\Temp\WERB3A5.tmp.version.txt

  Read our privacy statement:

   

  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Turn the power off when you insert the new hard drive (additional)

  I have a server poweredge R710 Dell with a PERC 6i controller. Currently, there are 3 installed disks than RAID 5 and are 0-2, all of the listed physical disks are online with no hot spare.

  My question is: I don't have 3 disks to install on the server exactly the same readers who are in the current configuration. Do I have to turn off the server to install these drives?  (I'll use OMSA to develop the existing single VD configured.  I saw a post that says not to shut down the server, so I am just wanting to make sure that everything I do is go on the server, install the new disks in slots open while its engine to the top and then make my other functions in OMSA to extend the RAID.

  Thank you.

  You never turned off to introduce new disks, except IF you are migrating a VD together for another computer or controller.