Satellite C655 - screen is sometimes too bright after hibernation

Similar Questions

• Satellite M30, screen remains sometimes almost black after start up to several minutes

  Satellite M30, WinXP

  Sometimes, the screen remains dark, which means that you can see that a little bit news startup in the background and also the Office of windows, up to 2 minutes before suddenly become really turned on.
  Not even the latest version of the BIOS has a change. And what's weird, is it still does not appear. A non stop-and-shut-down-start sequence showed that it appears about 2 to 3 times.
  What could be the reason?

  Hi LeTom,

  did you use the os recovery toshiba or a clean install?

  It seems that the display shows a fault, then here are a few questions to play safely!

  There the failure also occure when the Red Toshiba logo appears shortly after starting start?

  If you are using a clean install of the OS, you need to do a complete new installation with the Toshiba Recovery CD (attention all data will be lost, make a backup).
  Then, the laptop is set back to the default settings of the software and if the failure occurred, you should check the material by a Toshiba service partner!

  I think that the M30 is still under warranty!

  Bossi Bye

• ultra computer window 7 not sometimes wake up after hibernation

  I am running windows 7 ultra on computer dell xps QuadCore 8300 and recently my computer sometimes wake up after hibernation when I move the mouse so I have to shut down the computer using the power button can you help me.

  Go to your control panel and go to your Power Options. No matter what plan you have selected, click on "Change plan settings", then click "change advanced settings of power."

  This should open a list of options, now click on the button '+' option of sleep and
  change the "Allow hybrid sleep" to "Off".

  Just a note, you can avoid only the computer from sleep mode hybrid, means the hard disk activity will remain intact. So the next time your windows is asleep, you can always get on easily by just moving the mouse or pressing a keyboard button.

  Please see the link below. And I believe that it is a desktop computer?

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• The screen of very low brightness after a new installation of LED panels

  I recently changed my screen was cracked and paid for it as physical damage are not covered by the warranty of my SVE15136CN. A few days later, the new screen developed a black spot on the left which has increased significantly every day. So I gave him in the center of service again. The service man now says he has changed the screen, but that's a new problem. After the first start, the screen works normally. After a few hours, the brightness is extremely low and not back to normal even after handeling options brightness and power through windows or change the graphics driver. Nor did the change in brightness after plugging in the charger, as it shud be ideally. After three weeks, he suggests that my screen cable is defective not allowing not my screen to win enough power (then how to get enough power to start?) or even the motherboard needs to be repaired for damage. (how it works for the first start?). I feel that something is fishy in this regard. Tell me if it is possible everything that happens? How shud I proceed?

  Hi mihirvd,

  Thank you for considering the Sony community!

  We are sorry to hear the problem you're having with your computer. Another moderator has already answered your question on this thread: VPCEE31FX starts and runs for a while and then the screen turns white can anyone help please

  It's already a hardware problem and we cannot proceed with troubleshooting. We strongly suggest to ensure coordination with the Sony Service Centre. They know the process and they are well informed on how to repair your device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• Satellite C855-1CH - cannot control the brightness after closing / opening lid

  Hello

  I have a problem with windows 7 64 and amd 7610 m driver, when I installed the driver from toshiba site, have problem with hibernate.

  When I closed the lid and unplugged AC adapter / CC, and after a few minutes/hours, I turn on the computer the light are the same (my brightness with battery equals 30% and 100% of turnover) and cannot be modified with the function keys and power option did monitor brightness, but I only reboot the system, the back,.

  How to solve this problem?

  I'm trying to install the driver of the 7600/7500 AMD and battery time passed quickly with down in brightness in 1.5/2 hours (with 7610 m 2.5/3) and fan work card strong mother, while I use in solitaire.

  Thanks for the help!

  If someone can help me, contact me.

  > When I closed the lid

  The laptop goes into hibernation or standby mode once the lid has been closed or just the screen turns off?

  I'm not quite sure if its really a problem of display driver.
  Other FN keys work correctly?

  It seems that the C855-1CH Satellite was sold without any preinstalled system and looks that you have installed the Win 7 64 bit in your own hand.
  Were all Win 7 drivers as properly installed VAP?

  What is the BIOS? Is up to date? If this is not the case, try to update.

• Satellite L500D - screen off sometimes

  I bought this Satellite L500D several months and sometimes the screen goes black. It tends to occur when the charger is not plugged, but the battery is charged to 100%. "Indicators of the system" (the lights that are on when the laptop is turned on) are light and therefore the NumLock key, but whatever the button I push, the screen does light up not until I turn it on then the power button.

  Apart from that, sometimes when I need to recharge the battery, I plug in the adapter but the laptop will continue to emit a beep or will pop up to say that it is connected but does not support messages. She will also be taken 30 seconds to recharge.

  Any ideas?
  Thank you
  nic256

  Hi nic256,

  Can you please tell us what operating system do you use?

  If you use the preinstalled operating system from Toshiba, I think that s a hardware problem and you need help from an authorized service provider. Technicians can check your laptop and fix what needs to be covered by the warranty on this new laptop.

• Re: Satellite P870 - screen flickers for a while after the Toshiba homepage

  My new Toshiba Satellite P870 starts with screen blinking 1, 2 or 3 times with each start, exactly AFTER. Toshiba, Leading Innovation Logo starts.

  Can anyone help?

  Thank you in advance!

  I put t know what it looks like, but as something like this shouldn't happen. If you have any new laptop contact your dealer as soon as possible, explain the situation and ask for replacement.

  If you are not satisfied with your product, you can get replacement. In my client countries have 14 days to do so.

• How can satellite C50-A-1 - I reduce brightness after installed Win 7

  How can I reduce brightness on this?

  I'm trying to download the drivers to view this site, when I try to extract .zip files they say impossible to unpack because nothing in the files.

  Help please

  Can you please send the link where we can download this driver and check the zip file?

• Satellite M100-164 display does not illuminate after hibernation

  After the computer wakes up from hibernation by lifting the display panel (cover) and the LCD screen turns off due to power management settings, display shows the Toshiba logo and does not return after a key is pressed and the keyboard is not responding.

  I turned - power & removed the battery without success-.
  OPS: windows XP.
  Help, please.

  Hello

  You have removed the battery but wait you a bit?

  If please plug the laptop and remove the battery.
  Wait 15-20 min and then plug the AC adapter and put the battery in the laptop.

  Then try again!

• Satellite M30-801 - display will not work after hibernation

  Hello everyone,

  I hope that you will help me with this problem. I have a Toshiba Satellite M30-801 and my warranty is over.

  A few days ago my computer was a few hours of standby. When I rebooted the system, the screen has continued on a black background. No images.
  I am connected to an external monitor to check the video card and this test has been authorized. Now, I'm writing this letters using my laptop connected to the external monitor.
  Also, I noticed that there is blacklight on the screen.

  I had checked the power management for the controllers of USB bus on the control panel.
  I downloaded and installed the latest update of the bios.
  But the screen remains black.
  Could you help me? any ideas?
  Thank you and best regards,

  Stalker99ES

  When you start your laptop without external display can you see anything?
  When you use external monitor that happen when you try to change the display mode by using the FN + F5 key combination?

• Satellite A660-18 - screen too bright if the update to the BIOS?

  Hi guys, I need your help with this laptop because it gives me a lot of problems.

  I changed the screen of this Satellite A660-18 because one had been installed has been damaged. I installed and works fine but I have problems with the brightness. When I click - on brightness, it goes back and when I click on + it breaks down. It is much too bright and want to do something about it.

  Bios help to solve this problem and how Flash the BIOS on these laptops? I flashed the BIOS on desktop pc but on that I don't see any way to do it. Is it possible to fix the screen without changing the BIOS? Some have said that I have to Flash the BIOS as new screens do not work 100% with old BIOS.

  Help, please

  Thank you

  Hi sky blue,

  You have an original spare part of Toshiba (display) or is it a 3rd party screen? It is important to use the Toshiba spare parts only because they are tested and designed for your Toshiba laptop. If you use 3rd party parts, they may not work.

  The version of the BIOS has nothing to with the brightness of the display and the brightness of the display can be changed with the key FN + F6/F7 combination, but not in the BIOS.

• Satellite A25-S279 - screen is too bright all of a sudden

  I went to the MS site for cleartype fonts and fooled. I did not like the cleartype fonts, so I manually turn off in windows and internet explore.

  However, something happened that is causing the entire screen to be very bright makes all the washed out colors. I plugged in the VGA output for a CRT monitor, and brightness/colors are there.

  My keyboard has been broken for a while, so I use an external USB keyboard, which means that I can not access the FN key. I did to in in Windows display properties, but the sliders he for the Trident card which adjust brightness, saturation, and tint cannot be moved. Sound like they are there permenantly.

  Also, I went into the Bios and made sure he was using the default settings.

  Anything else I can try? Do not have the restore CD.

  Thank you.

  Possibly there s nothing wrong with the brightness setting.
  You said that you don't like the cleartype fonts and have disabled manually in windows and internet explore.
  Perhaps this is a reason to deliver you

  Have you tried to put the BONE to this early time?
  I mean the point of time before you turn off cleartype fonts?

  I think that you should do this to make sure that this option screen brightness doesn t affect.

  Greetings

• Satellite A300 - screen goes really bright

  After that I connect everything works well on my Satellite A300, but after a minute or so, the screen gets really bright, can someone there help me with this problem? Thank you.
  Games like cod4 work fine without any extra brightness.

  As far as I know Vista there are 7 levels of display brightness. To be honest, I can't imagine that is the lower, for you, too bright, but all we have own opinion on it. Just for example, for my daily work, I use level 6. I don't like the maximum level.

  So there is not much you can do. Power settings choose your preferred plan (I use BALANCED) and set the brightness of the display. This plan will be loaded whenever you start your laptop and you can work on your laptop by using the lowest level of brightness.

  That's all that I can say about it.

• Satellite A210 - 11 p connected to the TV - the colors are too bright

  Just changed to the top of an A60. I used a TV S-signal with one SCART and it worked fine.

  Now on the new computer, the colors are too bright and washed out. I updated the driver but no luck.
  In fact, I find the screen on the A210 way too bright and had to calm colors to factory settings.

  Does anyone else find this?

  Any idea what the problem may be? I read the posts on the problems of black and white, but I have the color but too bright and washed out.
  Wait I got an idea of what the TV has two euroconnectors... on the second SCART, the image is black and white!

  How is it it worked well on the old A60. I'm really starting to miss that laptop. :(

  I have an A210 and I don t think that the screen is too bright.
  Fact is that some of the A210 notebooks are equipped with the real bright screen. This is a new display technology and it s great.
  I like it much better as common display without the true light.

  On my laptop satellite A210 colors are light and not washed out them. The display is perfect

  One question; have you noticed the same problem on the internal and external monitor or TV?

  > Waiting I have an idea of what the TV has two euroconnectors... on the second SCART, the image is black and white!
  Several months ago, I connected a laptop to my TV and the picture was black and white. The reason for this problem has been the assignment of pins badly on SCART cable then.
  On the other hand, it is possible that your s-video option was not enabled on the TV's.

• Satellite L30-115 returns after hibernation too early

  Satellite L30-115.
  The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation.

  Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do nothing when I opened the lid, too.
  The laptop still exists, after hibernation.

  Is this a bug in the BIOS, normal behavior, is there a place to put not to resume when I open the lid? BIOS and energy savings are updated recently.

  Thank you
  Dan

  When the lid is closed the small switch will activate and laptop knows what lid are closed. Light moves this contact will be interruption and laptop think the lid is open. Because of this, your mobile PC wakes up from hibernation mode.

  A few minutes ago I tested how reacts a Satellite phone and also my new Vista preinstalled Satellite P200D preinstalled old WXP. I did the same settings that you are, and the result is the same. After the opening of the notebooks of the lid to wake up from hibernation mode.