Satellite C855-22U - quality audio output problem

Similar Questions

• Satellite Pro M30 - audio output problem

  Hello

  Audio output level is lower when I bought this laptop... All of a sudden without any reason. I almost don't hear all the sounds... What is the problem? Software is ok. I reinstall the audio drivers. Once when it was portable sound back to a normal level and after restart, it was still very quiet...

  I thank the of for any advice

  Hello

  He s strange question you described, but first, you must verify the volume control settings in the sounds and Audio devices.
  Check if controls are set to max.
  Also check the application audio sigmaTel. There you can disable power management.

• Satellite U300-152 - no audio output device is installed

  The sounds are works well when I do update windows, update antivirus and updated some software like adobe air and adobe shockwave but when I open the laptop the next morning, there is a red cross marked in the speaker icon on the lower right of the laptop and it says : "no audio output device is installed".

  I couldn't find the sound and game controller in Device Manager so I'm frustrated. Its been 3 days now, I use the laptop without noise.

  Can you please help me in this matter?

  My laptop is Toshiba Satellite U300-152
  Windows 7 Ultimate but not pre-installed (Vista Home has been the pre-installed)

  I tried to download the latest audio driver from realtek high defintion, but its still does not. Tried several restarts, System Restore, disable antivirus but does not yet.

  I don't know what can be the problem but the fact is that updates Windows update offers some drivers and, in general, you should not install their Mr. with other words, you should only use the drivers from Toshiba.

  What can you do now? Have you tried to reduce the OS to an earlier time (before installing updates) and check the functionality?

  One last thing. Software driver Sound should start with Windows, then please check MSCONFIG > startup if the sound software is listed and enabled it.

• Satellite A305-S6872-no Audio output device installed

  I bought this new model Satellite A305-S6872 from Best Buy. It came with Vista OS and gives the error: No Audio output device installed. I called Toshiba tech support and was advised to use the recovery disk, since there is no driver from Toshiba Web site for audio driver. However, after the recovery, the problem remains. Help, please.

  Hello

  Is a unknown device din peripheral list manager? How it looks like there?
  For me, it is really strange to get such error after installing recovery image.

• Satellite T135-S1305 - no audio output device is installed

  Recently my laptop make some loud beep sound,

  The first time I just restart and it was OK but on the last time I restart and it also stopped but now the speaker near the clock symbol is signed with X and there is no sound, "no audio output device is installed".

  What can be? What should I do?

  THX.

  Hello

  Have you tried to install the audio driver?
  For the most part, there is a solution!

  Satellite T135-S1305 is a series of laptop Toshiba us.
  The driver can be found here:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  The Conexant audio driver installation should help you.
  Here is also a nice youtube video, but rather the Sigmatel driver you must use the Conexant driver
  http://www.YouTube.com/watch?v=9lZzBDkpWkk

• Satellite Pro L20 - no audio output device installed

  Hi, I would appreciate some help with my installation of 32 bit Vista on my Satellite Pro L20 series.

  Installation went well but my sound icon has a cross with her and when I place the mouse over it I see the message: no audio output device installed. I went in full with privilagesand Device Manager there is an exclamation following audio controller appliances. I looked at the General properties and it says: "this device is not configured correctly (code 1). I uninstalled the driver and downloaded Realtek AC97-Ref: 6285_Vista_APO_PG536 driver installed and rebooted but I still got the same error messages!

  Can someone help me? I tried uninstalling and reinstalling many times now, I don't know where to go next!

  Concerning
  Abidan

  Hello

  As a boarder, said, if you have a Conexant sound card, you should look for a Conexant audio driver.
  The Realtek driver will never work because that makes this different s.

  Check other Toshiba laptops for the same card his Conexant. Maybe you can find a Conexant Vista driver.

• Satellite L300D-243 - no audio output device is installed

  Hello

  I look for a similar problem in the forum but have not found anything that's been resolved.
  I'll try to explain how my problem came.

  My sound is fine until when a few days ago I tried to lower the volume and then all of a sudden it froze.
  Came a message that his unit has stopped working.
  I restarted the laptop, but it has not started at all, nothing on the screen, just the fan runs at slow speed. I figured it by removing one of the plates of ram and then with the possible one began almost success except he was not an indication of a sound, just the message "no audio output device is installed", and an 'x' on the taskbar icon sound.

  In Device Manager it is not anything related to an audio device High Definition Audio Controller except under the menu system devices.

  So what do you think, is this a hardware or no problem and is it fixable.
  Hope someone can give me an answer.

  Thanks in advance!

  Have you read this thread:
  https://Forum.Toshiba.EU/showthread.php?82746

  Open the Device Manager.
  Then expand the sound, video and game controllers, click on the Realtek High definition Audio choose: turn OFF, then turn ON.

  If you can not find Realtek HD audio device (this is the sound card), so I recommend you click on view and choose 'show hidden devices '. Perhaps the sound card appears in the list...

  In addition, visit the Realtek driver page and download and install the latest Realtek HD audio driver.

  Hope that it could solve the problem

• Satellite C855 HDD unallocated / PXE - E61 problem

  Hello

  I am the owner of a Satellite C855, and it crashed. I opened the laptop and after awhile, he showed me the Toshiba load screen. At first I thought that the operating system has crashed, but I could not re - install it back, there is no boot file.

  Now, after Toshiba load screen, I get the following error:
  .....
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Reboot and select proper boot device or insert boot media in selected boot device and press a key

  The HARD drive is seen in BIOS. Connected to another computer, also it is recognizable in the BIOS, but it is not shown. There is no more partitions; now, it looks like a HARD drive unallocated. I checked the HARD drive for bad sectors and it doesn't have everything. I tried to recover the information about it but it does not work.

  I don't know who are the solutions because I don't want to lose the data I have on the HARD drive.

  TNX

  Hmm I m afraid the data is lost.
  What you could do is to check if you can access the drive HARD and the data connection of the HARD disk to the USB port using a USB-SATA 2.5 cart.

  I'm afraid that this will not help, but a check is worth a try m

  If not for the workbook, you must reinstall the system once more because it looks more like the system isn't bootable.

• Satellite C855 - 19 X - BIOS update problem

  Hi all

  I have a Satellite phone C855 - 19 X and the alert tempo TOSHIBA utility prompts me to update my BIOS. However when I am doing so I get the following message

  "Error".
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1"

  Does anyone have any experience with this kind of problem? Should I add this parameter, or is otherwise around it? Because the BIOS will be affected I hesitate to do so.

  Thank you in advance.

  Hello

  First of all, you should know that the update of the BIOS is a sensitive technique and using wrongly you can damage the motherboard. So be sure to always update the BIOS.

  Second, the update of the BIOS is not quite necessary in case your laptop runs correctly.
  You have problems using the laptop? Isn't it? Well, in this case I wouldn't touch the BIOS.

  However, the error message is telling as secure boot
  Secure boot is an available option in the BIOS settings. You should probably disable secure boot before running the BIOS update file.

• Satellite C870 - sound quality & Bluetooth connection problem

  C870 satellite.

  (1) problems with Bluetooth - machine could not find other peripheral and there were communications problems;

  (2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area.
  In the past (a few years ago)

  I used PC Toshiba laptop and it was OK.
  To be honest, I bought for this calculated because of my good experience of the past, but will be more careful in the future.

  Now I have to life with her in the past 800US.
  The rest is OK - for now.

  > 1) issues with Bluetooth - machine could not find other devices and there are communication problems;

  What Satellite C870-xxx you have exactly?
  From my own experience, some models support BT and some don t so probably your device does support BT or you have done something wrong then that configuration of BT.

  (> 2) I am very, very disappointed by the quality of the sound. The speakers are very poor. If I had known I wouldn't n buy it! Unfortunately, I have not had a chance to check it out and assumed Toshiba will keep minimum standards in this area. In the past (a few years ago)

  My own different models of knowledge supports different hardware specifications. You can buy models of laptops with Harman-Kardon speakers that offer the best sound quality. This device seems to support standard speakers.
  So it s always a question of value for money and in my opinion it is not too bad.

• Quality of output problem

  I am creating a video using a combination of video capture screenshots (PC and mobile) and audio.  Uses Windows 10 and Adobe Premiere elements 14.  Capturing video is mp4 and it works very well.  I used jpg and png for the screenshot and the files audio m4a.  When I put the screen shot in the timeline panel, I add audio to comment on the image.  At the time audio is progressing towards the bottom of the timeline image of the still image quality is terrible.  How can I fix this?  I use the AVCHD Lite 720p30 settings.  Thanks for any help.

  [Transferred to correct forum - Mod]

  So the output seems well but the video doesn't seem as clear in Premiere Elements? If this is the case, then it's just a matter of quality of insight into your reading - which ultimately means nothing. The quality of the preview - how it looks in the program - is simply for your convenience. It has nothing to do with what your end result will look like.

  If you want to improve the appearance of your preview, there are ways. You can go to the preferences of the program and ensure that the quality of rendering timeline is set to high quality (slow speed). This will slow down the time required for the program make your timeline, but your preview will be better. You can also click on the preview of the monitor Panel in Premiere Elements and set the playback at the highest quality.

  But, as I said, none of this has nothing to do with what you final output will look like. It is only for preview purposes.

• Satellite A100 and USB audio device problem

  I bought "toneport ux2 line6" and it does not work with my computer laptop (dual core 1, 73GHz, 1 GB ram, Windows Vista).

  The problem is when I listen to music through this device, it looks I would look scratched CD, from time to time that there is a short interruption. The same thing happens when I'm with gearbox (software that allow you to play the electric guitar using audio device). I checked everything, including change Windows XP OS.

  I have the latest drivers for the port of your (compatible vista), I downloaded 3.5 mechanism, only toneport is connected to my computer, I have disabled all installations flashing in vista, power management is scheduled for high performance. I disable the sound card. I checked my cell phone with line6 monkey and it says everything is ok. I checked the audio device on my friend's Office, and it works well.

  I desperately need help.

  Hello Marcin

  In my opinion, you must be sure your laptop running fine and according to your assignment I do not here no problem.

  So in your case you have problem with some additional equipment or third party software. Am I wrong? If there is a problem I see no reason to seek the solution with Toshiba. You should contact the manufacturers of all the devices and software that you use. They should have enough experience with own products and they should offer good support in troubleshooting.

• Satellite L300 PSLBOA - no audio output device is installed

  Hey guys,.

  I need to reinstall all the audio devices on my Toshiba Satellite L300 laptop.
  This site Web (free/real) should I go to reinstall them all back...

  I had the Realtek audio devices. I need ALL the features back! Does anyone know the exact/own/unfake/free site to reinstall all the audio devices on my computer?

  I have windows vista Home premium. And my model number: Satellite L300 PSLBOA - 08L 022.

  Please if anyone can help that would be great!
  Save me a lot of downloading the wrong things and go to the wrong sites!

  Thank you.

  Hello

  For me, it looks like an Australian Toshiba laptop and, therefore, you should use the Australian driver Toshiba page:
  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/support_page.jsp?

  Check it out!

• W540 - brightness of the display and audio output problems

  Hi all

  I've got 2 separate but really annoying problems with my W540 20BH:

  -display brightness keys does not:

  upon awakening from Hibernation, sometimer (really, randomly!) mode the brightness screen (Fn + F5/F6) keys do not work... If the brightness of the screen is stuck on max, min, or an intermediate level...

  Any who experience this problem? How to solve it? Is there a way to stop and restart the process that controls the Fn keys?

  -audio channel switch gets stuck

  A normal behavior of the audio configuration is:

  (1) the disabled speaker, microphone disabled volume

  (2) when you plug a headphone 4 pin, the headphone volume is running, microphone of the headset is turned on; the speaker volume is always turns off.

  (3) when you unplug the headphones, the volume of the speakers is always 0

  After each start up, the audio channel is 0, but don't commute between the helmet when it is plugged!

  I have to open the Control Panel, properties of realtek. With this window, disconnect and reconnect the headset. Now the volume has its normal behavior.

  Anyone experience this? You have a reversal or a better way to configure the audio channels and events, which is able to bypass the realtek Manager?

  Thanks in advance to everyone!

  
  

• Satellite C855: webcam not found - initialization failed

  * Hello.
  I have a Toshiba Satellite C855 and I had a problem because I spent in windows 7 64 bit (I was on 32 bits), the problem is that I can't find the webcam.and when I run the "Toshiba Web Camera Application" application in the device driver it displays this message:

  + the failure of the initialization of the webcam. Check the operation of the camera, and then restart the application or restart the computer. +

  I don't know what to do I just try to update the driver on the official website of Toshiba, also uninstalation instalation and all... nothing worked.

  Please help me.
  and I thank you in advance.

  Post edited by: soubou

  Is the webcam or any device marked with visible yellow exclamation point in Device Manager?

  Otherwise, the webcam module is defective and must be replaced.