Satellite C870 - sound quality & Bluetooth connection problem

Similar Questions

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Satellite T110 - Bluetooth connection problem

  Hello

  You just buy a Satellite T110, running on Windows 7 and have open Bluetooth it downloaded drivers.
  It can detect my N97 phone by using the "Add new connection" Wizard in the Bluetooth settings but Manager then displays an error "the service Detection failed.

  It fails also when I click on something to send by Bluetooth via wireless file transfer option, he can see my camera, but I get the error 'discovery of Service failed.

  I'm doing something wrong?
  Any help would be appreciated.

  See you soon,.
  A >

  Hello

  Just a quick question: have you tried to reinstall the Bluetooth driver?

  I had a similar problem with my cell phone. I could solve the problem after checking the Bluetooth settings. Only, I chose another port.

  Good bye

• Ios 10 Bluetooth connection problems

  Since the upgrade to ios 10. My bluetooth in my car (2016 Hyundai Sonata) guard connection connected and disconnect every few minutes. This never happened to level. Did someone else this experience?

  Hi MoHawk26!

  I see that you are having problems with your car Bluetooth and iPhone communicates is not properly since the update of your iPhone.  I know it's important to be able to connect your iPhone to your car Bluetooth, and I'm happy to offer assistance.  Please follow all the instructions in the following support article under 'If you are using Bluetooth:

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Bluetooth connection problems with the recent update of IOS

  I recently updated my iPhone 6s with IOS 9.3.1 update. Since then, my phone calls are inaudible in my car with my Bluetooth. I deleted the device in my car and turned off and restarted my phone, but my iPhone is not discover the Bluetooth in my car. Any ideas on a fix?

  Sorry, I can't offer a solution but I wanted to get this thread to keep up-to-date.   You aren't the only one with this problem.  I have an iPhone 6 s + and with IOS 9.3.1 update, calls I am doing in the completely distorted sound car.  Also appears that Bluetooth is disconnection/reconnection intermittently.

  Just found the problem today so I did not go through the process of removal of device re-matching, etc.

• Satellite L500 sound quality is very low

  Bought sucessfully above and upgraded to Windows 7 to XP.
  However, the sound is terrible - hail.

  This is applicable to the CD, DVD, and especially when you listen to audio books and it is impossible to listen to the radio. Have tried to change the settings of the speakers Realtek High Def, but no difference.
  Test of Windows 'sounds' are very good and the sound from two speakers.

  Having a Statellite about 5 years old and sound is far superior.
  Not an expert and don't know where else to look to improve the quality.
  Can't believe that this is supposed to be like this.

  Thanks in advance for any help.

  Stand by.
  Your laptop is equipped with Win7 preinstalled (factory settings)?
  Have you noticed that on the first day or now after installing Win7?
  Have you tried to change the sound settings in the player you're using (compensator)?

  Compare with old notebook is not so relevant. I have 4 years old Satellite M70 with a sound and harman/kardon speakers is fabulous and much better and stronger than the newest Satellite A300.

• Satellite L300 - 2 6 (PSLB8E) connection problem XP WLAN

  Hello

  I didn't speek good English... .but hopefully some1 help me with WIFI problem on 'toshiba satellite L300 2 6 PSLB8E.
  I was reinstal system from vista to Windows XP sp3

  Everythink is right only works doesent WLAN "Atheros AR5007EG" correct or something is not diferent
  System show me without a network, but when I try to rebot connection cannot download IP address

  I try hundryds type of pilots
  On vista this doesent egzist problem

  Please some1 smart - I really need HELP :(

  Have you tested with different routers?
  Restart your router, and then try again.

• E1 571 Bluetooth connection problem

  Hello

  I have Acer Aspire E1 portable 571. The Bluetooth of laptop does not work as the latest drivers are installed, bluetooth is on and check to detectable. But where to find the device via your laptop or to find the laptop through any bluetooth device no devices were found on both ends.

  Can anyone help me regarding this issue?

  Thank you

  Finally, I have the solution to this common problem of Bluetooth (not connected / not find devices).

  In win 7 when we on the adopter of Bluetooth and we have not automatically installed driver installed acer Bluetooth deivers victory, now after the win itself driver installation driver Bluetooth appears in the Device Manager and status but not work, not to find any Bluetooth device. Here is the solution:

  -On the Bluetooth and go to Device Manager and uninstall the drivers

  -After the uninstall, disable the Bluetooth and install the acer for Bluetooth driver that corresponds to your device

  - But not on the Bluetooth before installing the drivers

  -After installation turn on Bluetooth and you see victory do not install the drivers it self because the driver is installed and the unit is in working condition

  -Search for devices and I hope the Bluetooth not finding the device number is resolve

  Thank you

• HP g62-453tu bluetooth connectivity problem

  Salaam,

  I use my bluetooth works fine & no connectivity hp g62 age 3, from

  problem. After that, when I reinstall my window for some reason, I couldn't connect my bluetooth

  devices to my laptop. My computer laptop bluetooth cannot find any bluetooth device. Please help me.

  Hi hassaan1,

  It seems that it does not show the right Bluetooth adapter because it does not recognize. I've included the two links below. These are the Windows 7 drivers for two possible Bluetooth drivers for your computer. Uninstall all Bluetooth devices in your device manager and then install one of the engines below and try to connect to your Bluetooth device. If this does not work uninstall and install on the other.

  Driver Ralink/Motorola Bluetooth:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&swItem=ob_92786_1

  Broadcom 2070 Bluetooth Driver:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&swItem=ob_86863_1

  Thank you

• Passport in Volvo and Benz blackBerry Bluetooth connection problem

  My passport connects to the Bluetooth system in my Volvo V70 to 2012, but in the next few minutes it disconnects. When I try to reconnect, it will fail. No matter if I try the passport or the car system. I deleted the pairing on the car as well as on the phone and paired again without amps but no difference...
  There is no problem with the Z10
  On Monday, I drove in a Mercedes GL 350 2014 and I think he had the same problem. Every 3 Minutes a window "phone connected".
  What can I do?

  I think that maybe the Bluetooth on the phone has a problem...   Have you tried the Bluetooth phone with a headset or other Bluetooth device?

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• Satellite C870-1J6 wired LAN DHCP problems

  Hi all

  Here, I have a new laptop C870-1J6, which makes my life miserable. It won't start not reliable PXE, and the network card also does not start in Windows.

  On a cold start the PXE boot Gets an address dhcp fine most of the time, but a warm reboot fails most of the time.
  In windows this NIC also does not start. After five to ten minutes, he finally gets an address from the DHCP server. Rest of the network works fine.

  No points for guessing the manufacturer of the network card, of course, there a realtek :-(
  "RTL8102E/RTL8101E PCI Express Fast Ethernet controller.
  PCI ven: 10EC, dev: 8136

  None of the solutions, or can send Toshiba somehow? because I don't think I can do a lot on the PXE problem myself.

  At first, I have to say that I m really wondering why you have problems of LAN under Windows.
  Have you noticed these LAN issues from the first day of use?
  Are you using the original pre-installed OS that you got with your laptop or a facility clean or even company?

  Maybe stupid question, but I assume that LAN is set as first boot device, right?

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?