Satellite L10 - could not get the wireless operation

Similar Questions

• Satellite L10 - 195 - could not get the WIFI connection to the internet

  Hello

  I downloaded and installed the latest dirvers for wireless cards and EThernet for my laptop but I can not get the wireless to connect to the internet!
  Please help me before I crush my laptop. :]

  Thanx

  PS: Anyone know if there is one special way (other than the function keys) to swith the wireless on?

  Hello

  This may be a stupid answer, but on my laptop there is a switch on the front of the laptop that needs to be enabled for the wireless work. I saw this as a first step, and it doesn't seem to be well documented. Good luck.

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• BitLocker: Could not complete the requested operation because of...

  Two days ago Windows 10 was running on my laptop. BitLocker has been on two disks (D and E). For some reason, I have formated Win 10 and do a new install of Windows 7 Ultimate. After installation, when I unlock the drive D, it works very well. But I can't unlock the E drive. When I enter the password, the message "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."
  I'm sure that the password is correct at 100%, but I do not have any file recovery. Can someone help me?

  Hi NooriSAN,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot unlock a drive locked by Bitlocker key and get error message: "Could not complete the requested operation due to a catastrophic media failure or corruption of data on the disk structure."

  This could be if defective media stored on database security, or a program in the security software error has caused corruption on disk.

  For reference I suggest you to return the items mentioned below.

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Overview of BitLocker Drive encryption

  What are the main issues for Bitlocker?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

  Hello

  I'm doing a P2V with vmware converter standalone 5.5

  The source is the same machine that hosts the vmware converter 5.5

  The operating system is W2003 which acts as a domain controller

  VMware converter is launched by the administrator account.

  The error that I see on the balls of vmware - converter.worker is:

  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
  2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
  2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
  2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
  2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
  2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

  This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

  Any help or advice would be appreciated, thanks in advance

  Thank you for all your help

  I finally found the guilty service.

  It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

  It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

  Hopefully this thread will help others in the future.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

  I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

  Is there a solution

  original title: AutoPlay Windows 7

  It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

  PIECE AUTO REPAIR
  USING GROUP POLICY EDIT
  gpedit.msc in search
  Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

  In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

  Open regedit and locate the following key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

  Change: NoDriveTypeAutorun to 0 x 91

  If necessary, create this key as a DWORD.

• Spore origans. But they could not get the disc to download

  Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download

  Windows 7 Edition home premium

  Hello

  EA Spore games are you referring?

  If you are referring to the games EA Spore, I suggest you check the link for support:

  https://help.EA.com/en/spore?sso_redirect=1

• •EPMCSS-05261: could not get the information of the Aboriginal group.

  Hello

  Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

  I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

  «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

  Please could you let me know why we get this error message and no impact on the safety of the user.

  Thank you

  Michel K

  Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

  See you soon

  John

• Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

  System:

  Windows 7 (Service Pack 1)

  3720QM-i7 CPU @ 2.60 Ghz

  16 GB OF RAM

  Adobe Creative Suite Production Premium CS6

  I got a computer breakdown and both after effects and the first started crashing after that.

  I uninstalled then and since then I can not reinstall. I get this error message:

  Exit code: 7

  ERROR: DW013: could not get the root of inChildPath

  I tried:

  1. 1- Repair of Microsoft Visual C++ Redistributable Packages
  2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
  3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

  What is my next move?

  I have work to do.

  Thank you

  Stefan Vanderland

  Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

• Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite

  Try to update CC 2015 without success.  Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite.  Any ideas?

  U44... Update error http://forums.adobe.com/thread/1289956 can help

  -U44 more... discussion http://forums.adobe.com/thread/1275963

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

• "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

  "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

  I received this message during indexing on my computer.  I could not get the message, so I

  uninstalled Adobe.

  After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

  Then I tried to re - install Adobe, but who has turned to a complicated procedure.

  There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

  After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

  When I try to open the program by clicking on it, I get the above message.

  I went to the site of help from Adobe and read a complex string of instructions, including

  words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

  Needless to say that the instructions were no help.

  I said all that to say this.  I want that my computer back.  What should I do to do?

  Sincerely,

  Ralph Thompson

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  This may help: Application, file icons change in Acrobat/Reader icon

• Don't throw Illustrator CC 2014 (could not complete the requested operation) even after the new installation (3 times), someone knows how to solve? (Windows 8.1)

  Hi guys, my CC 2014 Illustrator won't launch, receive an error message 'Could not complete the requested operation', this isn't a problem of specific files, I can't launch independent Illustrator.  I have uninstalled and reinstalled 3 times and contacted support, but they were not able to solve at the moment.  This is a relatively new 8.1 windows installation and none of the custom fonts have been added.  I tried to delete the preferences and launch files and which had no effect.  No idea what I can do, any help would be greatly appreciated.

  Edit: Forgot to mention that I also tried running Illustrator as an administrator and that Illustrator worked perfectly on this computer from the installation (about 2 weeks) before this started happening.

  Thank you

  Chris

  

  baglosh,

  You reinstall using the way complete three steps (the otherwise strange things may persist)?

  (Check the box to delete the preferences), run the clean uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html