Satellite L30-149, only works with external monitor and VGA mode

Similar Questions

• Toshiba DVD Player & Aero (with external monitor in Extended Mode)

  I didn't know a lot about the forum on this subject, but if you Google 'Can not customize Aero' or another similar question you will see that it is a fumble from Toshiba/Vista to overcome, in some cases, as described below.

  * {color: #0000ff} SCENARIO *.
  * {color} * 1 Qosmio G50 - 10H.
  2 I had configured a DynaDock in the system and attached to an external monitor to try in "Extended" mode
  3 I disconnected everything and then tried to play a DVD by Toshiba Media Player.
  4 at this point, I had not looked at combinations of colors Windows or themes.
  5 Toshiba DVD Player wouldn't indicating that the Windows Aero scheme should be used.
  6 when I implemented the function customize, there is no option in the section 'Color & appearance' Aero.

  * {color: #0000ff} SOLUTION *.
  * {color} * after an unreasonable amount of googling and a multitude of suggestions and solutions, WE work that I present below.

  The eccentric solution was to go into settings/customize the display and click on the external monitor (which is gray). Remembering that this monitor is not currently attached, I unchecked "extend the desktop to this monitor". Immediately the Windows Aero was offered in 'color and appearance '. After selecting this regime, with its defaults, the Toshiba DVD movie player worked.

  * {color: #0000ff} GOTCHA EXTRA *.
  * {color} * when I reconnect the Dynadock and you want to use the external monitor in dual mode (extended), I'll have it becomes 'Extended '. What a pain.

  In any case, I hope this will help some other poor bastard who gets into this difficulty.

  Thanks for this interesting announcement.

• Close the laptop and continue to work with external monitor

  Hi, I just bought a laptop HP15 and I want to work with an external monitor, keyboard, and mouse, but I have no space in my office for monitor and notebook open.

  The point is that when I close the laptop being the PC on, it shuts down suddenly and I can't continue to work.

  I can't find the way to establish that the laptop turns off when I close the screen.

  can someone help me?

  Thanks in advance

  Hello

  Let us hope that the next video help (very similar to Windows 7):

  https://www.YouTube.com/watch?v=ODxQchBckPU

  You can ignore the adv after a few seconds.

  Kind regards.

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• My Satellite R830 does not work with external speakers

  Since the restoration of my laptop to factory settings (to solve another problem) it no longer recognizes my speakers when I plug them in, and I can't not all sounds out of them.

  I checked and the speakers work fine with other devices.

  Hello

  You get a sound using headphones or internal speakers?
  Did you check if mute is not activated?

• Satellite P100-240 only works with ACPI disabled

  Hello

  I recently bought a second hand P100-240.
  For a day, it worked very well, and I tested it with sisoft sandra, 3dmark, many games etc.
  All played well, and it was not overheating and really powerful.

  Then a day later, he just got started while I was using it. On reboot, it will reach point just sign into windows XP Media Center edition and then cut. Even in safe mode, exaclty the same thing would happen.
  I left it for a few hours, in which case it was overheated, but the same thing happened when I retested.

  I tried the live cd Knoppix, and initially it would turn off at halfway by starting.
  Then I tried to run the Knoppix with a "acpi = off" option and it starts very well!.

  Also, I have tried many BACK start-up based utils and these well everything worked.
  I tested the disk, the cpu (stress and burn in tests), memory (memtest). All tools ran fine and all tested ok (and the machine does not idle)

  I tried to install a copy of windows XP alongside XP MCE, but that on the installation screen lists the existing partitions, and the machine would just power off.

  So try the Knoppix ACPI thing, I tried to install Windows XP without ACPI (i.e. a STANDARD pc), and he got through the fine installation. Now, I have a fully functional laptop again and can play all the games etc like before. Everything I have disappeared are ACPI some associates of power options.

  Now, what I want to know, is this ACPI issue a collateral or the related issue of the BIOS?

  Im running 4.40 BIOS, which is the latest BIOS for the p100-240 (PSPA3E).

  Is there a previous BIOS, which is perhaps more stable and will work around this ACPI problem? But the confusion is how all it worked well for a day and a half at the start?

  Any thoughts would be helpful.

  Hello

  In my opinion, the laptop is closed due to a higher internal temperature!
  The point is that the laptop supports protection against overheating and sensors (ACPI Advanced Configuration and Power Management Interface) who would yell at the bottom of the unit automatically to prevent damage.

  You said that this happens all by playing a few games. This heavy application leads to higher heat dissipation and therefore the temperature rises.
  I think that you should first check your cooling modules if they are not clogged with dust and debris. A compressed air jet pourrait helps get rid of the dust.

  Second, you must use the graphics drivers from Toshiba because such driver was designed for the use of the laptop and controls the heat dissipation the GPU too.

• Satellite M10: CPU only works with 599 Mhz

  Hi all

  Just managed to change the motherboard in my after former M10 it had a power failure.
  He tells me now that my processor is clocked at 599 Mhz instead of 1.4 Mhz.

  Is the processor had it as well?
  Any ideas, thank you.

  Jay

  Hello

  It of simply the case; the firmware must be updated!
  After replacing the motherboard ASP always update the firmware on the motherboard. If it has not been done, the CPU is only 598 Mhz.

  You must contact the ASP for a update

  His son will confirm my suggestions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15879&MessageID=57994

• Microphone only works with external headphones... not by laptop

  I'm used to be able to talk directly to the laptop of communication via Skype.  Now, I have to use a headset with microphone so that your caller to hear me... a real pain... What can I do to fix this?  Thank you!

  Hi JennaM,
   
  Check sound settings in Skype to use the built-in microphone.
   
  a. open SKYPE--> Tools--> Options--> sound settings.
   
  More information on:
   
  HP laptop built in microphone problems
   
  For further assistance, you can contact Support Skype settings you need to change in the Skype program.

• I have a US Robotics modem only works with VISTA in 32-bit mode. My OS is 64-bit. How can I switch to 32-bit mode to use this modem/fax?

  I can't install my US Robotics modem, because there only drivers under VISTA 32 bit.  My current operating system is 64-bit.

  Is there an easy way to change my 32-bit system in order to install and use this modem/fax?

  Hello

  You cannot change your system of 64-bit to 32-bit

  they are completely different operating systems

  You must purchase the 32 bit OS and do a clean install of it

  Contact support with their product, USRobotics

  they write drivers for their products, not from microsoft

  http://www.usr.com/support/s-main-menu.asp

• Satellite 1110 series only works for 12 seconds and then powers down

  We have several series of 1110 (Z14 and Z20) laptops and one of them fails to start correctly. Everything works perfectly for 12 seconds, and then it turns off. Each time at exactly 12 seconds.

  Does anyone have any suggestions where I should start looking?

  I've already replaced everything stands (up to the CPU), but without result. There seems to be something inside the motherboard BTK20.

  Thank you

  > There seems to be something inside the motherboard BTK20.

  Seems so if you replaced the common areas like RAM, HARD drive and the processor then the last part would be the motherboard

  But what do you think an overheating problem?
  I mean that the laptop could close because of the higher temperature
  I recommend to check this maybe the thermal grease should be renewed, clean the fans and check again

• Streaming HTTP only works with F4M?

  I'm building a video player and would like to be able to search any part of my videos (flv and mp4).

  Here is my code:

  var video: VideoElement = new VideoElement (new StreamingURLResource (url, StreamType.RECORDED, startTime), new HTTPStreamingNetLoader());

  but my mediaPlayer.canSeekTo (time) returns false if it is not downloaded yet, so I can't get to any part of my videos.

  Does HTTP Streaming OSMF classes only works with files f4m and stuffs of Adobe (file Packager and original Module) (http://www.adobe.com/products/httpdynamicstreaming/)?

  If I want to use with any other HTTP Pseudo-Streaming as http://h264.code-shop.com/trac I would have to handle each request to look for myself (if its returns false to canSeekTo()) as a new video?

  PS: I'm already targeting flash player 10.1 (CONFIG::FLASH_10_1, true)

  Thanks in advance,

  --

  Pedro Taranto

  Hello

  Yes, you must run the package on each file manager.

  If you are working on a large video portal, in the long term, it should pay to use the Packager - since you'll be packing your video assets in a manner easily cached by routers, proxies, etc.

  Check this beautiful presentation (recording) by Will Law (from Akamai) for some more context:

  http://OSMF.groups.Adobe.com/index.cfm?event=post.display&PostID=31217

  -Andrian

• Problems with Satellite L30-149

  I recently reinstalled Windows Xp with SP3 on my Toshiba Satellite L30-149. When looking for audio drivers, I found a via
  Toshiba support. I was clear Notebook--> Equium L Series--> PSL35E (the only option)--> Windows XP.
  I installed this driver without error and now I sound down in the right corner of the desktop.

  If it must be installed correctly, but I get no sound from speakers or headphones. I looked at
  further discussion and it seems that many people have similar problems. I tried to install the driver for Vista, but it
  did not work (worked for somebody else, good...).

  Thanks for your help!

  Best regards

  Fredrik

  > So it must be installed correctly, but I get no sound from speakers or headphones
  First of all, you must check whether the sound card is correct and if there is no yellow exclamation point in Device Manager

  If the sound card will display correctly without any exclamation point means that the driver has been installed ok.

  In the next step, you should check the volume control.
  Go to control panel of-> sound-> playback and check volume control settings unique should be set at a higher level.
  In addition, check if mute is not activated!

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)