Satellite L30 - RTHDCPL. EXE illegal system not allowed when installing DLL audio driver

Similar Questions

• Satellite PRO L20: Tools & Utilities CD-ROM refuses to install the audio driver

  Tools & Utilities CD refuses to install the audio driver on my system (Satellite PRO L20). No idea how to solve this problem?

  Hello

  Have you tried to download and install the audio driver from the Toshiba driver page?
  There you should find the most recent version.

  But may I ask how did you try to install the audio driver? Did you get any error messages?

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• Windows 7 computer said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  Original title: Windowscodecs.dll missing

  IM using a windows machine 7 and one day, he said that the DWM.exe could start not due the windowscodecs.dll file is missing.

  I don't have to go back, any system restore points

  I ran the/scannow sf in command prompt and it says that the file is corrupted.

  I tried to put the machine in safe mode,

  I tried troubleshooting and software update

  and I tried to download external software to replace the file.

  It also affects the Aero theme, so my background is just a black screen!

  What else can I try that actually work?

  Why we just know it is a virtual machine?  Well...

  Have you looked on your system here to check that the file is actually missing (of course that mine has been replaced):

  

  I downloaded a file called on my OneDrive:

  64bitcodecs.dll (64-bit version)

  The link to my a drive is:

  https://onedrive.live.com/?ID=EC673DF6F8DFEE84%212368&CID=EC673DF6F8DFEE84

  You must visit my OneDrive, upload this file to a place, you can find, rename it to WindowsCodecs.dll and then copy and paste in your c:\windows\system32 folder (assuming that Windows is installed on your C drive).

  When you have done so, check again with Explorer that the file is really there (if it was missing before) and if everything looks good, reboot your system and see what things look like.

• My new windows 7 do not allow to install my Canon laser printer.

  My new windows 7 do not allow to install my Canon laser printer.  I understand that the 32-bit printer is not compatible with Windows 7. Canon told me that they do not have a new driver for the new OS, so please suggest me what to do to install this driver

  Generally, you use the Add Printer Wizard and see if the update of windows provides a generic driver.

  Or are you looking for your Canon model with the win7 compatibility site

  http://www.Microsoft.com/en-GB/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• Sorry, this content is not allowed when you try to post in the PL/SQL forum.

  Hello
  
  Also the command SQL and reserved words, the formulations used by my request.
  about 37 contained lines:
  
  row_cnt, rec_cnt, disc_amt, item_id, tmp_tot, amount, PMI.
  
  Am confused as to what word/s was considered at fault.
  
  can send the contents of any message to the moderator for verification?
  
  Concerning
  Zack
  
  Published by: Zack.L on July 25, 2010 17:20

  Ah, I see John "440bx - 11 GR 2" figured out that the word problem was "discount" on the sorry, this content is not allowed when you try to view.. (I replaced the "c" by "& #99;" here to avoid the same fate.)

• Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

  Hello.
  I'm getting desperate. I tried everything I could imagine.

  First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
  Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

  Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
  Thanks in advance.

  Can you please send the number of full model of your laptop?

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Impossible to install the audio driver Windows XP Home for my Satellite A110

  Hello!

  I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
  I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
  The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
  to install the Realtek HD audio driver!

  So I don't know what to do, and I can't play the audio in my laptop!

  Please, help me!

  Before you start to install a driver available, please download and review the Instructions for installations.
  You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
  Have you installed the chipset utility first?

• Installing the audio driver in Satellite A100-773

  I just installed Windows XP SP2 on my Satellite. I did a backup driver CD with my recovery CD. Now, here's my problem:

  I followed the Installation Instructions and each device works fine, except my audio driver, I also have an unknown PCI device. I expect that the PCI device is the problem for my work not driver Sound. Maybe someone knows an answer to this problem.

  I guess that the audio driver has not been installed correctly and so the sound doesn't work on the laptop. I think the unknown PCI device is the sound card.

  I put t know how you installed the audio driver, but I recommend you download the latest version of the Toshiba page, then install the audio driver in Device Manager.

• Impossible to install the audio driver for Vista for Satellite M100-152

  Hi people,

  I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFile Realtek HD Audio.
  Sound works when headphones are connected but no sound to the speakers.

  Someone at - it an idea?

  Best regards
  Hannes

  Post edited by: hannesgpunkt

  Post edited by: hannesgpunkt

  Hello

  where did you downloaded the driver? On the toshiba Web site? Maybe you should try the driver from realtek home page because they are native and absolutely clear things from other manufacturers. I think you should try "www.realtek.com" and install the driver downloaded from there, once you have uninstalled the driver for your machine.

  Welcome them

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• Satellite P300-1 c 7 - impossible to install the audio driver

  Hello!
  I need help!

  I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

  Could you please tell me why this error occurs?
  Thank you.

  You have installed all the service packs for Windows XP?

  Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
  Check again!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you installed the chipset front driver?