Satellite L300-1BB - portable computer takes 3-5 minutes to get into Windows

I have a Satellite L300-1BB sys unit.

When I start the laptop and prepare to load windows on the Welcome screen it takes 3-5 minutes to enter Windows.

I tried every update BIOS, firmware and nothing happened.

Is there a solution?
Please answer

Hello!

In your case, I would check how many programs in the startup folder and in msconfig. Clear all programs that you don't need (start-online programs-online start-up) and also have a glance in the msconfig (start-run-msconfig online online). There you can disable programs too.

In addition, you can defragment your HARD drive. I'm doing this every month 1-2.

Remove programs that you n t need to increase the speed at startup.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L300-1BB: sound is very blurry and sometimes interupts

    Hello

    I just bought a Satellite L300-1BB and the sound is very blurred and sometimes interupts himself for a fraction of a second.
    Do you know how to solve this problem?

    Is this a problem with the driver?

    Thank you

    Hi, I have the same problem.

    I have Windows xp sp2 installed and the driver downloaded audio latest of toshiba.

  • Start of Satellite L300-1 has 3 takes a lot of time

    Dear Sirs

    I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

    This model is like that, or it can be changed or may be downgraded to Windows XP?

    Hello!

    Here in the forum are already discussions on this problem so that you can search a little.

    There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

    Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite L300-1BB - I need some drivers and I can use AHCI?

    I installed Win XP (Service Pack 3) and then downloaded the driver AHCI Toshiba Web site storage, but I can't install it because of the demands of the driver.

    File "Readme" for the driver package indicates that it works only with higher processors (e.g. dual-core).
    My Satellite L300 has Celeron M520.
    Can I use the AHCI mode in this case? If I use AHCI (SATA HDD) with Celeron which driver for XP I need?

    And I don't know what touchpad, modem and WiFi drivers I need to install.
    I don't know the exact specification of this model (which is exactly inside).

    Stand by. Let's since the beginning and clarify everything step by step.

    How you installed the Windows XP SP3 home edition? Have you installed using compatibility mode?

  • Satellite L300-1BW - WLan disconnected about 10-15 minutes

    I own the:

    (Toshiba - Satellite L300-1BW)

    I thought I fixed this problem last night.
    Unfortunately, I was wrong. So far I've updated driver and BIOS on my laptop.

    My problem:

    OK so my internet works fine wirless thought when my laptop is not charging.
    However when the AC adapter is connect and the laptop is charging that the internet connects for about 10-15 minutes then log off, forcing me to reboot my laptop to get the internet working again.

    I'm on Vista Home Premium window and would appreciate any help what so ever.

    I looked through the forum and not yet fallen on a problem simular to mine.

    Thank you

    --

    Edit: Just checked the powersaving parameter and seen the the box "allow the computer to turn this device to save power" is checked, I uncheck the to solve my problem?

    > I thought I fixed this problem last night.
    I think you're talking about your first thread:
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=165938

    > Edit: just checked the setting of energy-saving and saw the box "allow the computer to turn this device to save power" has been checked, I uncheck the to solve my problem?

    You certainly need to deselect this option because if she checked s then the cell phone would turn off / Unplug the WLan card to save battery.

  • My Satellite is really slow and takes about 10 minutes to open a session

    Hello

    My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

    Need help.

    Concerning
    Russ

    Hello

    Have you checked the CPU usage rate?
    Start the Task Manager and check if any strange background process needs the full CPU performance.

    I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

    However the portable equipment could bad work.
    You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

  • Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

    I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

    But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

    Can someone please help.

    Hello

    Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

    What code you get BSOD?

    After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

  • Satellite L300-1BW - Wireless fails atfer a few minutes

    Hi people, thanks in advance for all advice offered.

    I have a Toshiba laptop Satellite L300-1BW, when I turn on the wireless connection would stay for around 10-15 minutes and turns off, when I run the arrow on the internet logo it wont even pick up wireless.
    I have to restart the laptop wireless to start again, but lasts almost 5 minutes.
    My other laptop stays connected without problem if is not the hub.

    I already did it on the following link
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165940.

    I have updated all drivers/BIOS... Wireless drivers. My drivers are Realtek...

    It made me confused bigtime.

    Please someone help!

    Hey,.

    What operating system you are using? It's the operating system preinstalled Toshiba or your own installation?

  • You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

    I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

    If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

    I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

    At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

  • My computer will not install programs, I get a window saying windows install allow access.

    I get a window saying that windows install will not allow access.

    Hi EarlNorah Jr.,
     
    -You receive this error message with the administrator account?
     
    If so, try the suggestion given in this article to resolve this problem:
  • Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
    Help!

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
    Help!

    You can read this:
    http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

    t-4-2

  • Complete description of the BIOS Version 1.40 - WIN for Satellite L300-1BB

    Somewhere, anyone can find the full description of the bios BIOS Version 1.40 - WIN for the L of Satellite series, which was the site of toshiba on the date 01/14/09. Why should I do this update for my machine?
    Kind regards.

    Hello

    I didn t find details changed in the BIOS update on the page of Toshiba Europe.
    I assume that Toshiba does not provide this information

    However, if your laptop runs without a problem, then I would not update anything you know
    I'm always that notice; never change a running system. And that's the best advice I've ever heard.

    PS: You're talking about L. Satellite... what Satellite L do you have exactly?

  • Satellite U500-1F5 - portable computer stops playing games

    The problem is that my laptop stop just when I start a game. This has not happened before, but when I try to run Mass effect 3 or crysis 2, it just stops. It is not always shuts down, only sometimes.

    Could be a problem of high temperature.
    Try to clean the cooling fans using a jet of compressed air.

    In the case where your isn t too high temperature, I recommend you to update or reinstall the graphics driver may be a problem with the graphic driver too.

  • When portable computer boot I don't usually get no internet, "no internet Access.

    First it already happened in the past year last and December last year when my portable HARD drive was dying. Anyway, it started yesterday morning after turning on my laptop, I did not install any software recently. As soon as I saw the problem, I immediately started to google the problem on my tablet. After searching a solution that actually worked, I tripped on the fix. The first fix I found was to enter my adapter properties network (or what I thought it was) 'Connection to the Local network' (at that time there were only three, a one hamachi and a second connection to the local network, currently there are 6) then in Configuration and in the Advanced tab change "speed and duplex" to "100 Mbit/s full duplex". After this, I restarted the laptop and then saw what I saw everyday, icon wireless with 5 bars. After browsing reddit and one game LoL I turned off the computer while I did some work around the House and when I turned on the laptop, the problem was back again. This time I tried to do what I did before but changed the duplex where it was originally. After Google search again I tried following an youtube video that helped me when I had this problem last year, go to services and stop and disable the "Network Location Awareness', who worked last year, but didn't this time. So after a few hours of frustration trying to find a solution I decided to reinstall my WLAN Drivers I had a repair dude gathered for my laptop after having replaced the dying HARD drive and backup of the data. (I have does not uninstall then install the drivers, installed the most common who was the same) After installing drivers and restarting, which seemed to work, and then I remember happy and navigation on reddit. Then I locked laptop lid to sleep and then watched a movie after I got the problem came back. I did all the previous things that helped me but not luck. So this morning I decided to see if it works and it does. Close the lid, comeback doesn't work. (There is no model, it's random and more a chance of him failing). So I backed up my important files on my external HD (wouldn't an HD dying again with no backup) then tried to see if I had internet in safe mode (made sure, that it is with networking), did not do anything, same problem. Then after to turn on and turn off the laptop, I get the same result. Turn off the laptop and decide to go to the Mall and buy food and when I get back the internet works. It seems that when I turn it on after a long time, it works.
    Please sevenforums, help me find a solution permanently! Thank you!

    Screenshots: http://imgur.com/a/ythyf

    Hope that someone will respond effectively to this, posted this on reddit and seven forums but was ignored :/ (So why text looks weird, copied and pasted)

    Sorry for the late response, has not shown on my Inbox.

    Anyway, a few days ago it looked like he ceased to occur and sets. Now, there are probably 10% of popping up so I'll follow your instructions when it arrives!

  • Whenever I start my computer after the office's I get a windows firewall disabled alert

    Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
    How to solve this delay?

    Hello

    What is firewall WIN XP or any other third-party firewall?

    If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

    NETSH FIREWALL RESET

    How to run the command prompt:

    Click on Start - run - write CMD , and then click OK

    LC

Maybe you are looking for

  • Intel HD 4600 graphics driver

    Product number: E0K83UA #ABA; HP ENVY TS m7 Notebook PC Windows 10 pro version 1511 build 10586.29 the link of the software and the driver, I downloaded the suggested graphic driver (SP72370). When installing it I get the following error message. "Th

  • drops game

    So let me explain my situation. I'm an apple guy. I have everything Apple. 5K iMac, iPad pro, alll iPhones retina 6 +, Apple TV 2nd Gen and have just received the new AppleTV, Apple Time Capsule 2 TB, multiple Airport extreme,... My problem is I have

  • PCL Code for the selection of the status bar

    We have a Unix-based program that relies on EZ for the selection of the printer spooler. Printing was allowed until we replaced the old printer with a HP 3005dn. We must make letterhead in tray 3. EZ print spooler requires to print PCL codes. I ran t

  • Application failed to initialize 0xc0000142

    About 2 months ago I had service pack 2 installed on my computer. Everything was working fine until about a month. When I try to open Microsoft Office Powerpoint and Excel, I get an Application error message. But I can't open and use Mircrosoft Word

  • LaserJet 500 m551 - print CMYK color

    Hello! I need to print separations on m551 color LaserJet 500 files. In particular, I file separations there was only CMY colors.  And black color (gray) got to mix C, M and Y. I had used PLC and PS driver, changed options, but printer uses all color