My Satellite is really slow and takes about 10 minutes to open a session

Similar Questions

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  You can read this:
  http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

  t-4-2

• After the upgrade to firefox 9 it is really slow, and it freezes. Computer slow when I try to move my crusor. I use windows Vista

  I've upgraded to version 9.1 and it is really slow when I turn on my computer. 8 it charge it really fast... Now it freezes and when I move my mouse it takes about 1 minute before it will allow me to scroll to the top. One of my toolbar does not work now.

  My system is Windows Vista Home Premium
  Gateway laptop.

  Check if they have an updated version to be compatible with Firefox 9.

  Also make the suggestions mentioned in the following article:

  • Firefox takes a long time to start

  Check and tell if its working.

• My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.

  My computer is running really slow and guard same gel if I double click, it will do. I have windows 7 for home.

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SideWinder x 8 mouse. The games are really slow and jumpy.

  I just installed a Sidewinder x 8 mouse. The mouse works fine but when I try to play games that they are really slow and jumpy. They work fine when I switch to my original mouse. I have Windows Vista, my system processor clocked at 1.6 GHz and 1024 MB of memory. What should I do to get the games working correctly? The games I play are ones on King.com

  Hi Pod1987,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) you are able to play other games other than those of king.com online using your Sidewinder x 8 mouse?

  (b) what version of Vista are you using? (32-bit or 64-bit)?

  Step 1:

  For the 32-bit version of Vista. Download and install the software for the mouse Sidewinder x 8 on the site mentioned below.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=gaming&type=mouse&name=3HA-00001&OS=WVista_32&lang=en

  For the 64-bit version of Vista. Download and install the software for the mouse Sidewinder x 8 on the site mentioned below.

  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=gaming&type=mouse&name=3HA-00001&OS=WVista_64&lang=en

  Step 2:

  Mouse SideWinder x 8 if used to play the high end so games I suggest you to update the Flash player on the Web site of the Adobe Flash Player. Click on the link below.

  http://get.Adobe.com/flashplayer/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it

• You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

  I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

  If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

  I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

  At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

• It takes about 6 minutes for the computer to boot.

  * Original title: Windows 7 Starter

  It takes about 6 minutes for the computer to boot. I mounted early and disabled now needed to start programs.

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good program antivirus https://toolslib.net/downloads/viewdownload/1-adwcleaner/

  2. I would like to delete all programs that claim to make it work better, safer or faster computer.  The vast majority of them is actually malware

  3. I remove any "protection" software on your computer and let the only Antivirus product quality - more below...

  4. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure

  5. I would like to be sure that none of the drives are more than 75% in use

  6. I would check my memory using the auditor memory Windows 7

  7. I would like to install and run Autoruns to check what is in the startup process

  8. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.

  9. I would like to delete startup programs/applications, unless I really need to start

     Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Roxio anything
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer
  • Dropbox
  • OneNote
  • EverNote
  • All Apple products
  • QuickBooks
  • Spotify
  • Pandora
  • AOL desktop
  • Some games, especially online ones

  What Antivirus buy?

• L20 - 264 takes about 10 minutes to stop

  Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
  Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
  There is no software hogging the system because I've been surfing or play media files.
  Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

  See you soon

  Hello

  I agree with Jonathan

  A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

  I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

  By the way: the compatible memory module for your device are
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  Good luck!

• Startup takes about 5 minutes to complete to start on my HP laptop.

  Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

  1. What security software do you use?
  2. You did it all meaning hardware or software change?
  3. You get the error message? If Yes, when and what is the exact error message?

  I suggest that you perform a clean boot procedure, and then try to install the add-in.
   
  See the link to perform the clean boot.

  Method 1: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Method 3: Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

  http://support.Microsoft.com/mats/slow_windows_performance/

  You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419/en-us

  Please come back if the problem persists, we will be happy to help you further.

  Thank you

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

  Time to compress the video

  I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

  DVD-video is encoded more time-based
  as the size of the file. Compression is not necessary.

  A video file of 100 minutes should fit on a 4.7 GB DVD.

  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  The following freeware can also be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• The Print Test takes about 15 minutes to complete.

  I have the same problem with a D1520. I went through all the self-help and the Test print. The Print Test takes about 15 minutes to complete.

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• HP Officejet 5610 all-in-printer decided to take about 5 minutes to print or copy a document to a page.

  I have a HP Officejet 5610 all-in-one-3 years.  My printer decided to take about 5 minutes to print or copy a document to a page.  Can anyone help?

  Original title: impression of the printer

  Hi Phyllis,

  I suggest you follow the steps in the link given below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Brief us with the State of the question. We will help you to come.