Satellite L300-1CU / problem with the start-up of the machine

Similar Questions

• Satellite U400 - 10L: problem with the start-up & reboot

  Hello

  Well I don't like much about the touchpad overheating but I have a problem. When I restart this mobo instead of activate after a reboot it stays black without any reaction only lower diods, dvd - rom and the display flashes (can't hear fan or hard drive).

  If I press the power button / stop all the icons of diod (ac, pwr, hdd bat) shine up just for a second and new (can't hear the fan hard drive or cpu) computer does not turn on. All this happened only when AC cable is connected to the power if I use just notebook power source battery boots and restart without problems.

  If I remove battery completely from the laptop, once more, I get the same symptoms (cannot start). And the saddest part of this story is the fact that I got brand new Toshiba U400 10 L to the seller and got a new.
  It has the exact same problem.
  As you all probably understand im crazy because in the last two days, I tried really everything, including the BIOS without flashing and the success.

  Well im not sure whats going on, but this could be the problem with the battery or a bad contact?
  Any ideas?
  I would return it back?

  Thanks much for the reply

  Hello

  The behavior of your laptop is really strange and I suppose it might be bound only to a hardware problem.

  A friend of mine couldn't t start the laptop connected to the AC adapter the power adapter is faulty. It was only possible to start Notepad using the battery, and only if the battery was not completely empty.

  I put t know if your AC adapter failures but the authorized service provider should definitely check out the laptop and accessory for laptop (AC adapter).

  Then call the ASP in your country and ask the technicians for later handling.

  Greetings

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Satellite L300 - recovery ends with the error message: 10-FA1Z - 045D

  My Satellite L300 is 3 months old and one a few days ago I resorted to the use of the 4 recovery DVDs.
  After several hours, I get an error: 10-FA1Z - 045D message. I made 3 attempts and get the same message every time.

  Any suggestions?

  My only suggestion for that is you should contact the closest service provider authorized as soon as possible. I am not sure what can be the problem, but it must be HARD drive issue or a problem with the recovery image.

  In both cases, you will get free and if necessary service service can order new DVD of facilities of recovery for you.
  Do not wait too long and vase your time with her. Call the nearest service tomorrow and talk to them.

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• H satellite L505-13 - problem with the resolution of games

  Hello, I have a problem with the resolution of games, I just that:
  800 x 600 and 1024 x 768
  Yet, I have the latest version of the ati driver and directx 11...

  Windows Dectet my monitor properly (plug-and-play), and my screen resolution works well for: 1366 x 768 and 800 x 600.
  on the other hand, when I start a game I have only the choice between these two resolution: 800 x 600 and 1024 x 768...

  All the games don t fit the full screen and there is always a black area on the right and left.

  Some games (crash)... and I thought it made a link with said that I have only 2 resolution.

  I have a toshiba L505 - h - 13 (PSLS9E)
  my graphics card: ati mobility radeon hd 5145 graphics card
  OS: win 7 32 bit

  I hope someone can help me find a solution
  Thanks in advance

  Hello

  I put t know what games you want to play, but generally speaking, it of also depending on the game you can use screen resolutions. For example if your game supports only 2 screen resolutions, you can only use these resolutions.

  So all you can do is update the driver DirectX and display. Then, look for an update (patch) for the game.

  Good luck! :)

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Satellite C660D - a problem with the cooling system has been detected

  My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

  I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

  I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

  Please help quickly, this prevents me from working and even other things now.

  Thank you

  Hello

  Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

  But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

• Satellite L750D-1FD - problems with the display driver

  I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
  Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
  Dxdiag appears to the:

  Name: Standard VGA Graphics adapt
  Manufacturer: Advance Micro Devices, Inc.
  Chiptype: AMD ATOMBIOS
  : Type DAC: 8 bit
  Memory Approx.Total: n/a
  Current display mode: 800 x 600 (1 Hz)

  It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

  Hello

  I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Win7 SP1
  4.9.2.0 TOSHIBA supervisor password utility
  TOSHIBA HW Setup Utility 4.9.2.0
  TOSHIBA Assist 4.02.02
  TOSHIBA ReelTime 1.7.18
  AMD driver 1.0.0.52 xHC
  8.834.1 - 110420 a-118118C-Toshiba AMD display driver
  TOSHIBA value added package 1.5.10.64
  ATI HDMI Audio Driver 7.11.0.7710
  Conexant Audio Driver 8.51.1.0a
  Wireless LAN driver
  Synaptics Touch Pad Driver 15.2.11.1
  V4.07 Bluetooth Monitor
  Atheros Bluetooth Driver Package v1.0.7 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Atheros LAN Driver 1.0.1.50
  Card reader Realtek 1.0.0.14
  TOSHIBA 1.0.4 Wireless LAN indicator
  TOSHIBA Sleep 1.4.2.8 utility
  3.1.8 TOSHIBA face recognition
  TOSHIBA eco Utility 1.3.2.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA PC Health Monitor 1.7.7.64
  ConfigFree 8.0.38
  TOSHIBA Web Camera Application V2.0.0.21
  TOSHIBA V4.00.7.01 VCR - HAS
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  TOSHIBA Disc Creator 2.1.0.9 for x 64
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1

  If you need assistance more let us know.

• Satellite A660 - 07P problem with the pointer of the mouse using the touchpad

  I just bought my A660 07P last Thursday, September 15, 10 and I noticed that I had problems with the mouse pointer using the touchpad.

  From time to time, the cursor/pointer is locked and seems something like a button up and down.
  I assume it's because it's on a mode of waiting, but in this case as every 5 minutes.
  When it is locked, it will also change the zoom percentage when the touchpad is struck. It is very not when I'm in the middle of something and I can not move the pointer. In addition, the start is very slow.

  BTW, I have not installed any programs or applications. I'm still testing until Friday, otherwise I'll go back to where I bought it.

  Hi mate

  This isn't touchpad problem.
  I guess as support for computer laptop MULTI-TOUCH PAD
  There are a few additional features supported by touchpad, and I think that you have enabled this while using the touchpad

  The touchpad supports the features:
  _ChiralMotion_
  You can scroll vertically and horizontally

  _Pinch Zoom_
  This feature provides functionality like the scroll wheel zooming

  _Rotating (chiral spin) _
  This provides gestures to rotate the photos and other objects

  _Momentum_
  This feature provides a smooth, fast trackball as the movement of the mouse. A quick finger on the touchpad surface can move the sliders in the entire screen.

• Satellite A40 - attention: problem with the cooling system has been detected.

  Hello guys,.

  From time to time, I get the following message is displayed:

  WARNING: a problem with the cooling system has been detected Toshiba
  Please turn off computer immediately and return it for service.

  I have Windows XP on it.
  I opened the cooling fan and clean it. Of course, I found it dirty rally.
  But still, I get this message!
  What should I do?
  I live in Northern Germany.

  Any advice is welcome and thanks in advance.

  Ibrahim

  Hello

  The message says it all!
  In this case you should contact the service provider authorized in your country!

  > I opened the cooling fan and clean it. Of course, I found it dirty rally.
  Eventually, the cooling modules don t like needs and that is why the message again!

  Nothing to my friend... you need help laptop technician

• Satellite P100-347 - problem with the judgment during the game

  I have a problem with my (pspa6e) Satellite P100-347

  After about 10 minutes of play time with games like battlefield 2, the SIMS2 and so on... my pc stops...
  I knew it was close because of high gpu or cpu temp...

  I felt that my laptop was warm, but after playing for a while its normal...

  So I installed HWmonitor to check my gpu, CPU and disk hard temp...

  That's what I show:

  THRM: 61.C - 141.F

  CPU: core0\1 - two 64.C - 147.F

  GPU: turn 85 stable - 90.C
  This normal use... no games...

  HARD DRIVE: 39.C

  Something must be wrong! GPU temp is too high?
  I tried a fresh install of the OS...

  Thnx for all the help and answers!

  Hmm these times can be a little high.

  Most likely there is dust in the radiator. You can use compressed air to remove it. Or as a miracle solution, blow into the vents dust closes in contrast to air circulation.

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Satellite A100-773: problem with the installation of WinXP Pro

  Hello

  I try to install Windows XP Prof on my new laptop A100-773 (Media WinXP Center preinstalled Edition). After that I put in the installation disk, restart the computer and then selected CD in the boot menu, it said something like "verification of hardware configuration". After that black screen and nothing more happens.

  Also, I tried to start Linux (Knoppix) CD. Same problem, at some stage, the system stops and doesn't do anything.

  Anyone has any idea how this problem could be solved?

  Thanks a lot for your answers in advance.

  Kind regards

  Chris

  Hello

  Have you tried to boot form CD recovery Toshiba or on the original CD of Microsoft?
  The recovery installation CD should generally work without any problem.
  In addition, if you want to retrieve the unit with the Toshiba Recovery CD you will get 2 modes. Standard and expert mode.

  I guess the message because there might be something wrong with the hardware or any device. I would recommend to enter the BIOS and check the settings. You can also try the options default and safe change.

  But first try to boot from the recovery CD.